Re: Needing a Command to read if a letter is Capitalized
Onwardbob
OK, got it. But that con v doesn't do anything
toggle quoted messageShow quoted text
BOB SOUTAR…ONWARD THRU THE FOG
-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Mike B Sent: Saturday, October 17, 2020 6:47 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] Needing a Command to read if a letter is Capitalized Hi Bob, To get to the Speech settings / properties page quickly press, Insert / NVDA Key, Control + V. Now tab many times to find the options for how you want the capital letters reported. Take care and stay safe. Mike. Sent from my iBarstool. Go dodgers & Rams! Main's Law: For every action there is an equal and opposite government program. ----- Original Message ----- From: Onwardbob <mailto:onwardbob@roadrunner.com> To: main@TechTalk.groups.io Sent: Saturday, October 17, 2020 5:32 PM Subject: Re: [TechTalk] Needing a Command to read if a letter is Capitalized Hi, just how would I do this in NVDA?? Thanks... BOB SOUTAR…ONWARD THRU THE FOG -----Original Message----- From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Damien Garwood Sent: Saturday, October 17, 2020 12:53 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] Needing a Command to read if a letter is Capitalized Hi Dave, NVDA has two options for differentiating between lower and upper case. You can either have the voice change pitch, or you can have a beep. Or you can have both. Once you've selected that option, you can simply arrow to the letter and it will do its thing. Not sure how it works in braille, if at all. But again, beeps should work in that case as well. Hope that helps. Cheers, Damien. On 17/10/2020 08:40 pm, Dave wrote: Hello,
|
|