|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, What is different? Did you keep arrowing down, because it should have been directly below that, and your saying you don’t see that? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Sent: Sunday, January 07, 2018 3:47 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Janet, It was a it different with O16. When I arrowed down I was given the option: never block messages from this sender’s list. We will see. Thanks for your help. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Ok, let’s try it. Now take your time in following these steps.
2. press the application key. 3. press the letter j for junk email. 4. arrow down until you hear Junk E-mail Options, and press enter. 5. tab to Block safe Senders page, you might have to press control plus tab to get to the block safe senders page, this all depends on how your Outlook is configured, and tab to 4. press the space bar on the add option. 5. an edit field will appear now paste the email address you want to block. and press enter. 6. Tab until you hear the ok button, and press enter, and your finished.
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Janet, I get it when I focus on the e mail.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, Wow, I’ve made a mistake in number 5. tab to Block Senders page, not safe senders page, you might have to press control plus tab to get to the block senders page, this all depends on how your Outlook is configured. Follow all the other steps adding this fifth step though.
Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Sent: Sunday, January 07, 2018 3:33 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Jeff, Ok, let’s try it. Now take your time in following these steps. 1. focus on the email. 2. press the application key. 3. press the letter j for junk email. 4. arrow down until you hear Junk E-mail Options, and press enter. 5. tab to Block safe Senders page, you might have to press control plus tab to get to the block safe senders page, this all depends on how your Outlook is configured, and tab to 4. press the space bar on the add option. 5. an edit field will appear now paste the email address you want to block. and press enter. 6. Tab until you hear the ok button, and press enter, and your finished.
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Janet, I get it when I focus on the e mail.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Janet, It was a it different with O16. When I arrowed down I was given the option: never block messages from this sender’s list. We will see. Thanks for your help. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Sent: Sunday, January 7, 2018 4:33 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Jeff, Ok, let’s try it. Now take your time in following these steps.
2. press the application key. 3. press the letter j for junk email. 4. arrow down until you hear Junk E-mail Options, and press enter. 5. tab to Block safe Senders page, you might have to press control plus tab to get to the block safe senders page, this all depends on how your Outlook is configured, and tab to 4. press the space bar on the add option. 5. an edit field will appear now paste the email address you want to block. and press enter. 6. Tab until you hear the ok button, and press enter, and your finished.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Janet, I get it when I focus on the e mail.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, Ok, let’s try it. Now take your time in following these steps. 1. focus on the email. 2. press the application key. 3. press the letter j for junk email. 4. arrow down until you hear Junk E-mail Options, and press enter. 5. tab to Block safe Senders page, you might have to press control plus tab to get to the block safe senders page, this all depends on how your Outlook is configured, and tab to 4. press the space bar on the add option. 5. an edit field will appear now paste the email address you want to block. and press enter. 6. Tab until you hear the ok button, and press enter, and your finished.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Sent: Sunday, January 07, 2018 3:15 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Janet, I get it when I focus on the e mail.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Janet, I get it when I focus on the e mail.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Sent: Sunday, January 7, 2018 3:59 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: reddit
Gene
This may be a longer answer than you anticipated
but explanation is needed.
They are poor defaults because defaults should be
set so that new and inexperienced users will get the best results without
tailoring settings and that, presumably, those who want to tailor them will have
learned enough to do so. A lot of people never learn much about most
programs they use.
When a new screen-reader user or an inexperienced
Internet user is learning, automatic changes should not take place. the
student needs to know and understand the difference between browse and forms
mode. The student should also have predictability as much as
possible. The inexperienced user shouldn't have to worry about times when
automatic changes occur and times when they don't when entering the same kinds
of fields. In other words, screen-readers with automatic switching may
switch you to forms mode when arrowing but not when tabbing or perhaps it's the
other way around. I don't use automatic switching and I don't
recall. I want to control what mode I'm in. The experienced user may want and understand why such behavior
occurs. The inexperienced user should not be exposed to it.
Sounds are used as the default to indicate when
forms mode is switched to and when browse mode is switched to. The default
should be that these changes are spoken. Hasn't the student got enough
important things to learn and become comfortable with without adding a nonverbal
indication as default?
There are one or two other defaults in browse and
forms mode that should be changed but I won't go into them here. These
defaults reflect technical people deciding what should be defaults without
realizing what settings should be used for inexperienced and general users a lot
of whom won't learn and won't be interested in learning the details required to
use the other settings well.
Gene
-----Original Message -----
least eight years, maybe more. I never had issues with automatic browse mode, sounds, etc. But perhaps, in this case, it's causing trouble. Out of curiosity, why do you say that these are poor defaults? On 04/01/2018, Gene <gsasner@...> wrote: > I didn't say to activate the ok button, which I should have said for > completeness and because other people may want to change these settings. > I'm sure you would have done so anyway, but I want the instructions to be > complete. > > Gene > ----- Original Message ----- > > > From: Eleni Vamvakari > Sent: Thursday, January 04, 2018 9:40 PM > To: main@TechTalk.groups.io > Subject: Re: [TechTalk] reddit > > > Do I need to change the mode itself in NVDA? If so, I forgot the > command for doing so, since it's usually automatic. I know nothing > about Chrome, except that it no longer works in XP, and its interface > is incredibly different from anything I've ever used. I tried it once > and found it confusing. > > On 04/01/2018, Gene <gsasner@...> wrote: >> I did a bit more testing right now in Chrome. The check box isn't >> displayed >> if you try to move directly to it. You have to move through the earlier >> fields. I tabbed through them. I didn't try other ways. When I got to >> the >> remember me checkbox, I downarrowed in browse mode and found the check >> box. >> >> Gene >> ----- Original Message ----- >> >> From: Gene >> Sent: Thursday, January 04, 2018 2:47 AM >> To: main@TechTalk.groups.io >> Subject: Re: [TechTalk] reddit >> >> >> I don't know what versions of programs you are using. I tested with my >> XP >> machine, in part because it wasn't convenient for me to test on my Windows >> 7 >> machine at the time and, I may have had in the back of my mind that you >> were >> probably using XP, which may have made me a bit more likely to test in >> that >> way. I am using an old version of NVDA, one of the 13 series for reasons >> I >> won't go into here. I didn't test with the latest XP conpatible version, >> though I either have it or one almost as new as that. I tested in Chrome >> and Firefox. I used Firefox ESR and the latest XP compatible version of >> Chrome. I found nothing while tabbing in either browse mode or forms >> mode, >> as I recall. In browse mode, I found the check box when down arrowing >> from >> the remember me check box. I may test with a newer version of NVDA out >> of >> curiosity but I'll wait first to see what others report. >> >> Gene >> ----- Original Message ----- >> >> From: Eleni Vamvakari >> Sent: Thursday, January 04, 2018 1:18 AM >> To: main@TechTalk.groups.io >> Subject: Re: [TechTalk] reddit >> >> >> I didn't find it at all, either labelled or unlabelled. The only >> checkbox that is reading is the "remember me" one. Nothing else is >> displayed at all. I am using Firefox and NVDA. I can try this with 7 >> instead of XP, but I doubt it would make much of a difference. >> >> On 03/01/2018, Gene <gsasner@...> wrote: >>> Here is more information. The I am not a robot check box isn't properly >>> accessible. You can use it but how it appears changes depending on the >>> browser you use. If you use chrome, at least the version I checked >>> with, >>> which isn't the latest, I see an unlabeled check box below the remember >>> me >>> check box. >>> With firefox, the check box is read as I am not a robot. >>> >>> Before, I said not to assume anything about forms. But if you were >>> using >>> chrome, you would have had no meaningful information to tell you what >>> the >>> check box is except that, if you knew that the I Am not a robot check >>> box >>> is >>> popular, you might have thought this might be one. So I shouldn't have >>> said >>> not to assume anything on the assumption that you would have found it. >>> I >>> should have said, don't assume anything and check with more than one >>> browser. I'm sorry I thought you would very likely find it by looking >>> in >>> a >>> different way. You might or might not have. >>> >>> Gene >>> ----- Original Message ----- >>> >>> From: Gene >>> Sent: Wednesday, January 03, 2018 7:02 PM >>> To: main@TechTalk.groups.io >>> Subject: Re: [TechTalk] reddit >>> >>> >>> Don't ever assume anything about forms. This form has no captcha edit >>> field >>> and you can't find what you are looking for by tabbing. Down arrow in >>> the >>> area after you resubmit your password. You will find an I'm not a robot >>> checkbox. >>> >>> When I say don't assume anything, I can understand why, if tabbing, you >>> would not realize you had missed an item. But once finding out that >>> there >>> is likely a captcha, move in various ways, including down arrowing >>> through >>> the form somewhere around where you would expect a captcha to be. >>> >>> Gene >>> ----- Original Message ----- >>> >>> From: Eleni Vamvakari >>> Sent: Wednesday, January 03, 2018 5:32 PM >>> To: main@TechTalk.groups.io >>> Subject: Re: [TechTalk] reddit >>> >>> >>> But I don't even see a place where I can enter the information, let >>> alone anything about a capcha. That's the problem! >>> >>> On 03/01/2018, Jujube <ellaxyu@...> wrote: >>>> I'd get a captcha solver like WebVisum or Rumola. >>>> >>>> ----- Original Message ----- >>>> From: "Eleni Vamvakari" <elvam2167@... >>>> To: main@TechTalk.groups.io >>>> Date sent: Wed, 3 Jan 2018 16:12:43 -0500 >>>> Subject: [TechTalk] reddit >>>> >>>> I am trying to join reddit but am having difficulties. I enter >>>> my >>>> username, my password (twice), and my e-mail. Then, I get a >>>> message >>>> like "care to try that again"? I read that it could have to do >>>> with a >>>> capcha but I can't find one anywhere, whether it's an accessible >>>> one >>>> with audio, or a completely inaccessible one! Can anyone help >>>> me? >>>> >>>> Thanks, >>>> Eleni >>>> >>>> -- >>>> Facebook: elvam2167@... >>>> >>>> anyaudio.net: elvam2167 >>>> >>>> Skype: elvam2167 >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> >>> -- >>> Facebook: elvam2167@... >>> >>> anyaudio.net: elvam2167 >>> >>> Skype: elvam2167 >>> >>> >>> >>> >> >> >> -- >> Facebook: elvam2167@... >> >> anyaudio.net: elvam2167 >> >> Skype: elvam2167 >> >> >> > > > -- > Facebook: elvam2167@... > > anyaudio.net: elvam2167 > > Skype: elvam2167 > > > -- Facebook: elvam2167@... anyaudio.net: elvam2167 Skype: elvam2167
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, Yes, that is correct, meaning I don’t think anyone would get the junk option if you have the message open. Ok now, you do get the junk option if you just focus on the email? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Sent: Sunday, January 07, 2018 2:53 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Janet, I can copy and paste it into an edit field. Correct, when I’m inside the message where her name and address are, the application key does not offer a junk option. The junk option is only there when I’m focused on the unopened e mail. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Sent: Sunday, January 7, 2018 3:45 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, I can tell you what to do with the email address, but only if you have it, and if you do have it, can you paste it in a edit field? I will tell you where to paste it, but I need to know if you can paste it first. Are you saying when you press the application key, there is not a junk option? I’m trying to understand this all. Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Sent: Sunday, January 07, 2018 2:33 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
I have it, but don’t know what to do with it. It is inside the email and my options don’t include junk, inside a message, only when it is unopened.
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Sent: Sunday, January 7, 2018 3:22 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: reddit
Eleni Vamvakari <elvam2167@...>
It still didn't work. I can't find the checkbox anywhere. All it has
toggle quoted messageShow quoted text
is one set of fields to sign up and another to log in. I guess I'll be forced to have someone sighted do this for me, and then, I'll write a letter of complaint to Reddit. Better yet, I'll start a topic there about it and accessibility in general! The odd thing is that, whenever I have seen the "I am not a robot" checkbox, it has never given me a problem. In fact, it is one of the easiest capcha methods that I've used!
On 07/01/2018, Eleni Vamvakari <elvam2167@gmail.com> wrote:
I just tried it, and it is very strange. I'm used to encountering an --
Facebook: elvam2167@gmail.com anyaudio.net: elvam2167 Skype: elvam2167
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Janet
Jeff, You already have the email address you want to add to the block sender’s list? Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Sent: Sunday, January 07, 2018 1:36 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Robin Frost
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: reddit
Eleni Vamvakari <elvam2167@...>
I just tried it, and it is very strange. I'm used to encountering an
toggle quoted messageShow quoted text
edit field, etc. and NVDA just making a sound and going into it. Now, I have to figure out which are edit fields and when to hit enter. This reminds me of JFW 4.5! I might try it for a while, or when a page keeps putting me in edit boxes that I don't want to enter, but I doubt that I will use this continuously.
On 07/01/2018, Eleni Vamvakari <elvam2167@gmail.com> wrote:
I am using Firefox ESR and NVDA 17.3. I have been using NVDA for at --
Facebook: elvam2167@gmail.com anyaudio.net: elvam2167 Skype: elvam2167
|
||
|
|
||
|
Re: reddit
Eleni Vamvakari <elvam2167@...>
I am using Firefox ESR and NVDA 17.3. I have been using NVDA for at
toggle quoted messageShow quoted text
least eight years, maybe more. I never had issues with automatic browse mode, sounds, etc. But perhaps, in this case, it's causing trouble. Out of curiosity, why do you say that these are poor defaults?
On 04/01/2018, Gene <gsasner@ripco.com> wrote:
I didn't say to activate the ok button, which I should have said for --
Facebook: elvam2167@gmail.com anyaudio.net: elvam2167 Skype: elvam2167
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Gene, I didn’t understand how to do that and am awaiting help from the group. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
Sent: Sunday, January 7, 2018 2:02 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
I should clarify that I believe I suggested a procedure to try but I said I don't have Outlook and I didn't know if it would work or something to that effect. I wasn't sure when you said the description was over your head if it was because you tried it and it might not work as described in Outlook or if you didn't understand or follow it. That's why I responded.
Gene ----- Original Message ----- Gene
From: Gene Sent: Sunday, January 07, 2018 12:41 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
I didn't give you full instructions. I gave you the principle of what to do and I suggested you ask on list if you want the specifics.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Sunday, January 07, 2018 6:54 AM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Pam, Yes, I would like to block her but don’t really know how to do it without losing the list.
Guess I’ll just settle for the delete key. Gene gave me some instructions on blocking just her, but they were a bit over my head. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Robin, when I messed up, I was outside. Later I went in and shift, tabbed to find the line with the senders name and email address which I highlighted. This time the junk option wasn’t on my application key. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Robin Frost
Sent: Sunday, January 7, 2018 1:59 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, When you say you hit j on the applications key were you inside or outside of the message? I ask as I don’t see it having been stated. Perhaps when inside the message highlight the sender if the list is configured to let it appear in the from field and try it that way. If the list is not configured to show the original sender in the from field that could be what’s causing the rub? Just a thought. Robin
From: Jeffrey Schwartz Sent: Sunday, January 7, 2018 12:44 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Gene
I should clarify that I believe I
suggested a procedure to try but I said I don't have Outlook and I didn't know
if it would work or something to that effect. I wasn't sure when you said
the description was over your head if it was because you tried it and it might
not work as described in Outlook or if you didn't understand or follow it.
That's why I responded.
Gene
----- Original Message -----
Gene
From: Gene
Sent: Sunday, January 07, 2018 12:41 PM
Subject: Re: [TechTalk] did it this time, blocked a sender and now
the entire list is blocked I didn't give you full instructions. I gave
you the principle of what to do and I suggested you ask on list if you want the
specifics.
Gene
----- Original Message -----
From: Jeffrey Schwartz
Sent: Sunday, January 07, 2018 6:54 AM
Subject: Re: [TechTalk] did it this time, blocked a sender and now
the entire list is blocked Pam, Yes, I would like to block her but don’t really know how to do it without losing the list.
Guess I’ll just settle for the delete key. Gene gave me some instructions on blocking just her, but they were a bit over my head. Jeff From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of Pamela
Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Robin Frost
Hi,
When you say you hit j on the applications key were you inside or outside
of the message? I ask as I don’t see it having been stated. Perhaps when inside
the message highlight the sender if the list is configured to let it appear in
the from field and try it that way. If the list is not configured to show
the original sender in the from field that could be what’s causing the rub? Just
a thought.
Robin
From: Jeffrey Schwartz
Sent: Sunday, January 7, 2018 12:44 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] did it this time, blocked a sender and now
the entire list is blocked Hi Janet, I would like to learn to block a sender without blocking the entire list. When I hit J on the application key, jaws says junk and then block sender. This is just how I did it last night. I hit the enter key when it said block sender but I soon realized that I had blocked the list as well. I’ve done this with another list, and it blocked only the one sender. The rest of the list continued to come in just fine. Thanks, Jeff
From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of janet gross
Jeff, Do you want to add a sender to the block sender’s list? I ask this question because, I have Outlook 2010, and from my experience and understanding, Outlook 2010 and Outlook 2016 work a little similar, I will read and type steps how to block a sender, if you are willing to try them. Can you tell me when you press the application key on the unopened email, and press the letter j for junk email, what do you hear? Janet From:
main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of Jeffrey Schwartz
Pam, I reread gene’s message and was able to isolate and highlight her name and e mail address, but my application key does not offer the opportunity to block her. Jeff
From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of Pamela
Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey
Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Gene
We'll see what happens as the discussion
continues. I would think some list members know how to block the actual
sender. Lists may be configured differently and the same block sender
command you used may work differently on different lists.
Gene
----- Original Message -----
From: Gene
Sent: Sunday, January 07, 2018 12:41 PM
Subject: Re: [TechTalk] did it this time, blocked a sender and now
the entire list is blocked I didn't give you full instructions. I gave
you the principle of what to do and I suggested you ask on list if you want the
specifics.
Gene
----- Original Message -----
From: Jeffrey Schwartz
Sent: Sunday, January 07, 2018 6:54 AM
Subject: Re: [TechTalk] did it this time, blocked a sender and now
the entire list is blocked Pam, Yes, I would like to block her but don’t really know how to do it without losing the list.
Guess I’ll just settle for the delete key. Gene gave me some instructions on blocking just her, but they were a bit over my head. Jeff From: main@TechTalk.groups.io
[mailto:main@TechTalk.groups.io] On Behalf Of Pamela
Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
||
|
Re: did it this time, blocked a sender and now the entire list is blocked
Jeffrey Schwartz
Gene, Right you are as I found when I reread your message today. Sorry if I was misleading. Now, it seems that Janet knows the specifics with outlook. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
Sent: Sunday, January 7, 2018 1:41 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
I didn't give you full instructions. I gave you the principle of what to do and I suggested you ask on list if you want the specifics.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Sunday, January 07, 2018 6:54 AM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Pam, Yes, I would like to block her but don’t really know how to do it without losing the list.
Guess I’ll just settle for the delete key. Gene gave me some instructions on blocking just her, but they were a bit over my head. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Pamela Dominguez
Yes, but don’t you want this person to be blocked? Unblocking him to receive the rest of your messages did not solve your problem. Pam.
From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 8:25 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi Gene, I seem to have resolved the issue in the following manner. I went to the blocked member, used my application key, or shift F ten would work. I focused on the person I wanted to block and arrowed down to the junk option. When I hit this item it said block sender. I went to the tab key and found the option to never block this person. After that all messages from the list came into my inbox as opposed to the junk folder. As far as blocking her, there is always the delete key. Jeff From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene
I don't use Outlook. I can't tell you the exact procedure with your e-mail program, but one or both of the following two approaches should work.
the address of the sender should be shown in the message properties. You should be able to copy the address to the clipboard and paste the address into the proper field when blocking a sender. Someone who uses your version of Outlook may explain this in more detail.
Or, if you can get to the from line, showing the actual sender's address, not the list address, you may be able to open the context menu and see options such as block sender. Again, someone who uses your version of Outlook will have to provide specific details. Whatever you are doing is acting on the list address, not on the from address showing the actual sender.
your procedure may work on mail from a single individual but it evidently doesn't work as intended when working with list mail.
Gene ----- Original Message ----- From: Jeffrey Schwartz Sent: Saturday, January 06, 2018 6:38 PM Subject: Re: [TechTalk] did it this time, blocked a sender and now the entire list is blocked
Hi, Seem to have resolved this problem. I unblocked the sender and now the entire list is coming through. Jeff
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Hi, Can I get some help here. The messages from the entire list end up in the junk folder. Thanks, Jeff
|
||
|
|
