Date   

Re: Dot Matrix Printer

Pamela Dominguez
 

That was what I thought. So I was surprised when I saw her message asking about what was the best one to get. Pam.

-----Original Message-----
From: Olusegun -- Victory Associates LTD, Inc.
Sent: Wednesday, January 17, 2018 1:42 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dot Matrix Printer

Sis Pam, it's possible that vintage dot matrix printers can be found
somewhere; but I think it may be a tough call! I believe they slowly died
away when the ink and bubble jets invaded their precious space!

Sincerely,
Olusegun
Denver, Colorado






---
This email has been checked for viruses by AVG.
http://www.avg.com


Re: Dot Matrix Printer

Peter Spitz
 

Actually, you can buy them new on Amazon, there are quite a few to
choose from but they seem to be around $300.

On 1/17/18, Olusegun -- Victory Associates LTD, Inc.
<ukekearuaro@valtdnet.com> wrote:
Sis Pam, it's possible that vintage dot matrix printers can be found
somewhere; but I think it may be a tough call! I believe they slowly died
away when the ink and bubble jets invaded their precious space!

Sincerely,
Olusegun
Denver, Colorado






Re: Dot Matrix Printer

Olusegun -- Victory Associates LTD, Inc.
 

Sis Pam, it's possible that vintage dot matrix printers can be found
somewhere; but I think it may be a tough call! I believe they slowly died
away when the ink and bubble jets invaded their precious space!

Sincerely,
Olusegun
Denver, Colorado


Re: Dot Matrix Printer

Pamela Dominguez
 

Wait a minute! Do they still make dot matrix printers? I haven't heard of them in years. Pam.

-----Original Message-----
From: Eleni Vamvakari
Sent: Wednesday, January 17, 2018 5:54 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Dot Matrix Printer

I am seeking recommendations for a good dot matrix printer. I am only
familiar with the ones made by Epson, as that is what I had in high
school (I was graduated in 2002), but it doesn't need to be from them.
It does, however, need to be high quality, not the modern ones with
hardly any weight or durability. It should also work with a parallel
connection and Windows XP, and should be relatively easy to control.
The one that I had, for example, contained four large buttons to
control things like linefeed and formfeed, and three or four small
buttons to control the quality and size of the print. Any suggestions
would be appreciated.

Thanks,
Eleni

--
Facebook: elvam2167@gmail.com

anyaudio.net: elvam2167

Skype: elvam2167




---
This email has been checked for viruses by AVG.
http://www.avg.com


hard drive knocks out internet

enes sarıbaş
 

hi all,

So I put the hard drive I took out of my pc into an external enclosure and currently using it. However, I seem to have a problem. When I plug it in, my wi fi connection iether slows down significantly, or drops out completely. Is there a solution to this? I know it is the drive, as when I unplug the drive,  the connection comes back.


Re: Anyone heard of and or tried the Tails OS

Jeremy <icu8it2@...>
 

If it's the same tails that people use when wishing to browse/use a computer and stay anonymous, making the suggestion of using a typical live environment that's been made to be accessible like Vinux and that it'd be comparable, that's just crazy. I would assume that someone asking about tails would understand its purpose, so hopefully he/she would also understand that there's a fair number of differences in the tails configuration, it being configured to use TOR, as one example, where a normal Vinux/Ubuntu live environment would not. That'd be like suggesting that a Ubuntu mate live/installation would be comparable to using Kali, which for those who might be familiar with Backtrack/Kali and what it's used for, would know just how many differences there truly are and why they're two different systems used for two different purposes.
While using a live environment to browse the internet is definitely a neat idea, for security, an environment like Vinux, just because it's accessible, does not make it the same as using tails.

On 1/12/2018 4:30 PM, Josh Kennedy wrote:
If you want to browse like that, get a ubuntu mate iso. put it on a bootable flash drive, then run it and load orca with either control alt s or control windows s, and browse the web. when done, unplug the flash drive restart the computer and you're good to go.


Re: why not the google mini

Laz
 

I don't know about the other models but on the Google Home Mini you
either squeeze the left side to lower the volume and the right side to
raise it or give it verbal commands to either raise or lower the
volume.

Laz

On 1/17/18, chris judge <chrisjudge1967@gmail.com> wrote:
I thought you just slid your finger around in a counter-clockwise manner to
reduce volume.



From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
heather albright
Sent: Tuesday, January 16, 2018 7:18 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] why not the google mini



But if the audio is over powering the speaker, she will not respond to voice
commands for example, listening to a ball game and she was not able to
respond to my voice unless I screamed at her to stop! I wonder if I can put
tactile markings on the two sides as you have to touch a certain spot to
ajust the volume level. It must be close to the switch on the side because,
she will start playing the last thing if I bump the side while muting her!
Heather



Heather Albright
Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
ham call sign:
kd5cbl
e-mail:
kd5cbl@gmail.com <mailto:kd5cbl@gmail.com>



From: Olusegun -- Victory Associates LTD, Inc.
<mailto:ukekearuaro@valtdnet.com>
Sent: Tuesday, January 16, 2018 4:52 PM
To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io>
Subject: Re: [TechTalk] why not the google mini



Of the Google Home Mini, Heather wrote in part:

"Cons



They do not have tactile indicators on the sides to let you know where to

turn the volume up or down; may sound stuipid but, I would have like some

tactile arrows to indicate that is where you have to touch to raise and

lower the volume."



Actually, sis, your observation is NOT stupid! However, since I want to be

THE LAZY BUM, I enjoy being able to raise the volume of the Google Home
Mini

by issuing a voice command. Example: "Hey (or OK) Google, "Volume up

xxxx%, where xxx equals 10% or more"" and it responds accordingly. Lower

the volume, no problems: I just issue a voice command reversing my
previous

action.



Also, if you keep squeezing it on the right side, the volume does increase.

It does for me anyway. Squeeze on the left and the volume decreases.

That's too much work for me especially if I'm not squeezing at the right

spot; so, the voice commands will do!!



Sincerely,

Olusegun

Denver, Colorado













--
Affordably priced Accessible Talking MP3 Players, Accessible phones,
Bluetooth devices, and accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Skype: lazmesa
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


C Cleaner help or tutorial

Mike Thomas
 

Hello,  Does anyone have a tutorial or can give some quick help on using C Cleaner?
Thanks,
Mike


Blog post on Firefox 58.

Robert Kingett <kingettr@...>
 

The below is a blog post explaining FF 58. It works better.

https://www.marcozehe.de/2018/01/16/nvda-firefox-58-team-regaining-strength/




--
Robert Kingett, journalist. View my website below.<p></p><p><br></p><p>[view my website here](www.blindjournalist.wordpress.com)<br></p><p><br></p>


Re: NVDA Add On

Ann Parsons
 

Hi all,

I am not familiar with this program, but reading the .doc file would seem to be in order.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@sero.email
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."


Re: why not the google mini

chris judge
 

I thought you just slid your finger around in a counter-clockwise manner to reduce volume.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of heather albright
Sent: Tuesday, January 16, 2018 7:18 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] why not the google mini

 

But if the audio is over powering the speaker, she will not respond to voice commands for example, listening to a ball game and she was not able to respond to my voice unless I screamed at her to stop! I wonder if I can put tactile markings on the two sides as you have to touch a certain spot to ajust the volume level. It must be close to the switch on the side because, she will start playing the last thing if I bump the side while muting her! Heather  

 

Heather Albright
Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
ham call sign:
kd5cbl
e-mail:
kd5cbl@...

 

From: Olusegun -- Victory Associates LTD, Inc.
Sent: Tuesday, January 16, 2018 4:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] why not the google mini

 

Of the Google Home Mini, Heather wrote in part:

"Cons

 

They do not have tactile indicators on the sides to let you know where to

turn the volume up or down; may sound stuipid but, I would have like some

tactile arrows to indicate that is where you have to touch to raise  and

lower the volume." 

 

Actually, sis, your observation is NOT stupid!  However, since I want to be

THE LAZY BUM, I enjoy being able to raise the volume of the Google Home Mini

by issuing a voice command.  Example:  "Hey (or OK) Google, "Volume up

xxxx%, where xxx equals 10% or more"" and it responds accordingly.  Lower

the volume, no problems:  I just issue a voice command reversing my previous

action.

 

Also, if you keep squeezing it on the right side, the volume does increase.

It does for me anyway.  Squeeze on the left and the volume decreases.

That's too much work for me especially if I'm not squeezing at the right

spot; so, the voice commands will do!!

 

Sincerely,

Olusegun

Denver, Colorado

 

 

 

 

 


Dot Matrix Printer

Eleni Vamvakari
 

I am seeking recommendations for a good dot matrix printer. I am only
familiar with the ones made by Epson, as that is what I had in high
school (I was graduated in 2002), but it doesn't need to be from them.
It does, however, need to be high quality, not the modern ones with
hardly any weight or durability. It should also work with a parallel
connection and Windows XP, and should be relatively easy to control.
The one that I had, for example, contained four large buttons to
control things like linefeed and formfeed, and three or four small
buttons to control the quality and size of the print. Any suggestions
would be appreciated.

Thanks,
Eleni

--
Facebook: elvam2167@gmail.com

anyaudio.net: elvam2167

Skype: elvam2167


Re: printers

Adrien Collins <adriencollins22160@...>
 

Hi Michael

Ok thanks for this, I have situated the printer on the end of my desk for
now. I will purchase a wifi printer the next time I need a new one. Thanks
again.

Regards

Adrien

Skype with me on adriencollins06

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Michael Boyd
Sent: 17 January 2018 03:08
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers


Amazon.com has meny USB to ethernet converter cables.

Michael

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Adrien Collins
Sent: Tuesday, January 16, 2018 3:38 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Hi

Ok thanks for all your comments. The printer is a canon pixma 2400, just a
cheap one. It doesn't have a ethernet cable. I wonder if it was possible to
get a usb to ethernet cable.

Regards

Adrien

Skype with me on adriencollins06

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Michael Boyd
Sent: 16 January 2018 20:00
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers


I don't know about your printer, but some have an ethernet port on them. You
could possibly connect the printer to your router and then set it up as a
network printer so that any computer also connected to this network could
print to it. Same basis as a wireless printer, only hard wired to the
network.

Michael


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Adrien Collins
Sent: Tuesday, January 16, 2018 11:56 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Hi

Ok Perhaps I'll explain it again, my printer is just an ordinary printer, it
is not going to be connected to a pc or laptop, it will be about 10 feet
behind me, there is no where else I can put it. Can I convert it to a wifi
printer by adding a converter to it or connect it directly to my router via
a cable? It is a good little printer. Is it possible to get a usb to
ethernet cable?

Regards

Adrien

Skype with me on adriencollins06

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Jeffrey Schwartz
Sent: 16 January 2018 17:42
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Adrian,
I know it can be done as my laptop is able to run the printer upstairs. I
have a tutor who did it in about five minutes. He also tried to include my
desktop in the network but this didn't work.
Jeff

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Adrien Collins
Sent: Tuesday, January 16, 2018 12:10 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] printers

Hi

Is there any way I can convert an ordinary usb printer into a wifi printer?
If there some way I can connect it to my wifi? I need to move it to the
other side of my room but don't want to run a long usb cable over the floor.

Regards

Adrien

Skype with me on adriencollins06


This week on Eyes On Success: Encore of 1650 Building Electronics Projects

blueskies11
 

1803 Encore of 1650 Building Electronics Projects (Jan. 17, 2018)

Though Ken Perry and Josh Miele are both blind, their lack of vision doesn’t prevent them from designing and building their own electronic hardware. Hosts Nancy and Peter Torpey talk with them about the Blind Arduino Project as well as other tools that enable blind people of all ages to participate in the vibrant global culture of hardware prototyping.

 

The podcast can be found in iTunes or you can find links to the audio and show notes at:

www.EyesOnSuccess.net

 

Check out Eyes On Success (formerly ViewPoints)

A weekly, half hour audio program for people living with vision loss.

Find out more about the show and get links to past episodes at:

       www.EyesOnSuccess.net

Find the podcast on iTunes or use the URL:

       www.EyesOnSuccess.net/eos_podcast

Find us on social media at:

       www.facebook.com/EyesOnSuccess

       www.twitter.com/@_EyesOnSuccess

       www.audioboom.com/EyesOnSuccess

Subscribe to the announcements-only list by sending an e-mail to:

       EyesOnSuccess+Subscribe@...

Subscribe to the listener discussion group by sending an e-mail to:

       EOS_discuss+Subscribe@...

Send suggestions or comments to:

      hosts@...

 

 


My Own Jaws Varient

George Zaynoun
 

Hello!

Since the Jaws language submenu is always disabled and I'd like to have not only English interface but Arabic, German, French and Swedish etc, how can I do to add extra menu languages to Jaws so I can have not only menus but dialog boxes in those languages as well?


Thanks.

--
Georges Zeinoun
Timmerv. 6A ITR LGH1102, 54163 SKÖVDE SWEDEN
Tel: +46 (500) 48 29 29 +46 (500) 43 55 11


Re: why not the google mini

Vicky Vaughan
 

Thank you very much for this information!

Sincerely, Vicky Vaughan

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Laz
Sent: Tuesday, January 16, 2018 6:42 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] why not the google mini

There is now an email group dedicated to blind users of the Google Home devices. you can join by sending a blank email message to the following email address:

BlindGoogleHome+subscribe@groups.io

Laz

On 1/14/18, Vicky Vaughan <vrvaughan63@gmail.com> wrote:
Is there a list that is for Google Home family of products?



Many sincere thanks! Vicky







From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On
Behalf Of heather albright
Sent: Sunday, December 31, 2017 2:21 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] why not the google mini



Hay thought I would give my two cents on the mini.



I like the price of the google mini at 30 dollars, give or take a few
cents woe!

I like the smallness of the device smaller than my hand. It sounds
good for that size speaker.

It will not nock your socks off but, it is good for easy listening.

It also responds to your voice at several feet away. And it will do
everything that the home does.

However, I find it seems to respond more quickly than my home does,
not sure why, could just be a fluke.

it can operate off a usb so you can connect to an usb hub and not have
to plug it in to an ac outlet; looks great on your night stand.

Cons

They do not have tactile indicators on the sides to let you know where
to turn the volume up or down; may sound stuipid but, I would have
like some tactile arrows to indicate that is where you have to touch
to raise and lower the volume. Why not just have the speaker turn to
go up or down. I have several speakers that operat in this fashion and
that is how the echo is too if I remember correctly.

Why does it not come with a battery pack so one can take it with them .
Although, you can connect it to a external battery if one wanted to
take it with them.

Overall:

I think the google mini is a good price it uses the google assistant
and you can save on space in various colors too. It is even smaller
than your iPhone or ipod 4gen. But if your looking to impress the guys
with a jamm fest wait for the max but, it will cost you way more at the bank.

Conclusion

I choose the google mini as it was a good space saver on my night
stand and it was more portable than the home. It was also less expensive too.

Cheers Heather





Heather Albright
Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
ham call sign:
kd5cbl
e-mail:
kd5cbl@gmail.com <mailto:kd5cbl@gmail.com>







---
This email has been checked for viruses by AVG.
http://www.avg.com

--
Affordably priced Accessible Talking MP3 Players, Accessible phones, Bluetooth devices, and accessories http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Skype: lazmesa
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


Re: printers

Michael Boyd <mike122061@...>
 

Amazon.com has meny USB to ethernet converter cables.

Michael

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Adrien Collins
Sent: Tuesday, January 16, 2018 3:38 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Hi

Ok thanks for all your comments. The printer is a canon pixma 2400, just a cheap one. It doesn't have a ethernet cable. I wonder if it was possible to get a usb to ethernet cable.

Regards

Adrien

Skype with me on adriencollins06

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Michael Boyd
Sent: 16 January 2018 20:00
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers


I don't know about your printer, but some have an ethernet port on them. You could possibly connect the printer to your router and then set it up as a network printer so that any computer also connected to this network could print to it. Same basis as a wireless printer, only hard wired to the network.

Michael


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Adrien Collins
Sent: Tuesday, January 16, 2018 11:56 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Hi

Ok Perhaps I'll explain it again, my printer is just an ordinary printer, it is not going to be connected to a pc or laptop, it will be about 10 feet behind me, there is no where else I can put it. Can I convert it to a wifi printer by adding a converter to it or connect it directly to my router via a cable? It is a good little printer. Is it possible to get a usb to ethernet cable?

Regards

Adrien

Skype with me on adriencollins06

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Jeffrey Schwartz
Sent: 16 January 2018 17:42
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] printers

Adrian,
I know it can be done as my laptop is able to run the printer upstairs. I have a tutor who did it in about five minutes. He also tried to include my desktop in the network but this didn't work.
Jeff

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Adrien Collins
Sent: Tuesday, January 16, 2018 12:10 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] printers

Hi

Is there any way I can convert an ordinary usb printer into a wifi printer?
If there some way I can connect it to my wifi? I need to move it to the other side of my room but don't want to run a long usb cable over the floor.

Regards

Adrien

Skype with me on adriencollins06


Re: why not the google mini

Olusegun -- Victory Associates LTD, Inc.
 

Hmm, Sis Heather, I don't let the audio overpower the speaker. It's just me
listening in my home office for the most part. This way, he hears me all
over the place and I don't need to raise my voice. And I love the football
games too. I hope your team made it to the finals, none of mine did,
Broncos, Seattle SeaHawks! May be the Jaguars can bring it all home for the
AFC.

Sincerely,
Olusegun
Denver, Colorado


Re: why not the google mini

Laz
 

There is now an email group dedicated to blind users of the Google
Home devices. you can join by sending a blank email message to the
following email address:

BlindGoogleHome+subscribe@groups.io

Laz

On 1/14/18, Vicky Vaughan <vrvaughan63@gmail.com> wrote:
Is there a list that is for Google Home family of products?



Many sincere thanks! Vicky







From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
heather albright
Sent: Sunday, December 31, 2017 2:21 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] why not the google mini



Hay thought I would give my two cents on the mini.



I like the price of the google mini at 30 dollars, give or take a few cents
woe!

I like the smallness of the device smaller than my hand. It sounds good for
that size speaker.

It will not nock your socks off but, it is good for easy listening.

It also responds to your voice at several feet away. And it will do
everything that the home does.

However, I find it seems to respond more quickly than my home does, not sure
why, could just be a fluke.

it can operate off a usb so you can connect to an usb hub and not have to
plug it in to an ac outlet; looks great on your night stand.

Cons

They do not have tactile indicators on the sides to let you know where to
turn the volume up or down; may sound stuipid but, I would have like some
tactile arrows to indicate that is where you have to touch to raise and
lower the volume. Why not just have the speaker turn to go up or down. I
have several speakers that operat in this fashion and that is how the echo
is too if I remember correctly.

Why does it not come with a battery pack so one can take it with them .
Although, you can connect it to a external battery if one wanted to take it
with them.

Overall:

I think the google mini is a good price it uses the google assistant and you
can save on space in various colors too. It is even smaller than your
iPhone or ipod 4gen. But if your looking to impress the guys with a jamm
fest wait for the max but, it will cost you way more at the bank.

Conclusion

I choose the google mini as it was a good space saver on my night stand and
it was more portable than the home. It was also less expensive too.

Cheers Heather





Heather Albright
Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
ham call sign:
kd5cbl
e-mail:
kd5cbl@gmail.com <mailto:kd5cbl@gmail.com>







---
This email has been checked for viruses by AVG.
http://www.avg.com
--
Affordably priced Accessible Talking MP3 Players, Accessible phones,
Bluetooth devices, and accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Skype: lazmesa
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


Re: why not the google mini

heather albright
 

But if the audio is over powering the speaker, she will not respond to voice commands for example, listening to a ball game and she was not able to respond to my voice unless I screamed at her to stop! I wonder if I can put tactile markings on the two sides as you have to touch a certain spot to ajust the volume level. It must be close to the switch on the side because, she will start playing the last thing if I bump the side while muting her! Heather  

 

Heather Albright
Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
ham call sign:
kd5cbl
e-mail:
kd5cbl@...

 

From: Olusegun -- Victory Associates LTD, Inc.
Sent: Tuesday, January 16, 2018 4:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] why not the google mini

 

Of the Google Home Mini, Heather wrote in part:

"Cons

 

They do not have tactile indicators on the sides to let you know where to

turn the volume up or down; may sound stuipid but, I would have like some

tactile arrows to indicate that is where you have to touch to raise  and

lower the volume." 

 

Actually, sis, your observation is NOT stupid!  However, since I want to be

THE LAZY BUM, I enjoy being able to raise the volume of the Google Home Mini

by issuing a voice command.  Example:  "Hey (or OK) Google, "Volume up

xxxx%, where xxx equals 10% or more"" and it responds accordingly.  Lower

the volume, no problems:  I just issue a voice command reversing my previous

action.

 

Also, if you keep squeezing it on the right side, the volume does increase.

It does for me anyway.  Squeeze on the left and the volume decreases.

That's too much work for me especially if I'm not squeezing at the right

spot; so, the voice commands will do!!

 

Sincerely,

Olusegun

Denver, Colorado

 

 

 

 

 

36221 - 36240 of 100020