Date   

Re: Wireless laserjet printer question

Robin Frost
 

Hi,
Well apparently the pc has found its driver as I can print with it via USB I just can’t access any part of its interface to set up its wireless capabilities so as to connect to it via that method.  I hope that clarifies.
Robin
 
 

Sent: Wednesday, November 11, 2015 9:17 PM
Subject: Re: [TechTalk] Wireless laserjet printer question
 

Well, Robin, have you checked the HP site for a Windows10 driver update?  On your wireless network, is the printer being detected? 

 

I am using a Canon all-in-one Model Number MF8580CDW and I was able to get it going with no sighted help.  One caveat:  I am NOT RUNNING Windows10, so the opinion expressed here may be mooted.

 

But, try haunting down a driver on the HP site first before you give up on the printer.

 

Sincerely,

Olusegun

Denver, Colorado




Re: Wireless laserjet printer question

Olusegun -- Victory Associates LTD, Inc.
 

Well, Robin, have you checked the HP site for a Windows10 driver update?  On your wireless network, is the printer being detected? 

 

I am using a Canon all-in-one Model Number MF8580CDW and I was able to get it going with no sighted help.  One caveat:  I am NOT RUNNING Windows10, so the opinion expressed here may be mooted.

 

But, try haunting down a driver on the HP site first before you give up on the printer.

 

Sincerely,

Olusegun

Denver, Colorado




Wireless laserjet printer question

Robin Frost
 

Hi Everybody,
I was just curious if anyone out there is using a wireless capable laserjet printer which you were able to set up out of the box without vision and if so which ones and are you using it under windows 10?
I ask because I purchased an HP wireless capable printer with my new windows 10 pc and thus far even with it hooked up via USB for now I can’t find a way to communicate with any web interface it might have for getting its wireless connectivity started using screen readers at all.  It might soon be returned which led me to wonder if anyone has had greater success with such devices and if so with which models.
Thanks for all light you could shed on this for me in advance.
Robin
 


Brailliant BI 40 issues after updating firmware

Cristóbal
 

Hello list,

So after reading the notice of a firmware update being available for Humanware’s Brailliant displays, I did the update on my system and now I am unable to input any characters. The refreshible cells and command buttons and thumb keys are working as normal, but I can’t enter in any text via the six cell keyboard nor can I execute any cord commands. Nothing has changed as far asBraille settings with Jaws. I’m running JFW 17 by the way. The display is connected via USB on a Windows 8.1 machine. I’ve ggot a Win 7 laptop I can try with, but am not currently at that one.

I’m wondering if I inadvertently toggled some setting or if this is something others are experiencing?

 

Thanks,


Re: IPhone 6 question

Rajmund <brajmund2000@...>
 

Hello,
I only use it for writing, the rest are still easier to copy and paste with. LOL, MY METHOD IS A 3 FINGER TAP 4 TIMES. I can copy a whole IOS log that way - chventually...

----- Original Message -----
From: Victor <victorelawrence@gmail.com>
To: TechTalk@groups.io
Date: Wednesday, November 11, 2015 10:29 pm
Subject: Re: [TechTalk] IPhone 6 question



Yes, it helped a little. I need to get familiar with all the commands
and gestures that are used when Braille screen input is on and being
used. I'd like to learn how to use the copy and paste commands while
using Braille screen input.

Thank you,

VictorOn 11/11/15, rajmund <brajmund2000@gmail.com> wrote:
Hello,
And did it help, somewhat? IF not, I can help.....

----- Original Message -----
From: Victor <victorelawrence@gmail.com>
To: TechTalk@groups.io
Date: Wednesday, November 11, 2015 7:19 am
Subject: Re: [TechTalk] IPhone 6 question



I just read a guide someone posted to Apple Vis. It was helpful.

Victor

On 11/10/15, rajmund <brajmund2000@gmail.com> wrote:
Hello,
Have you had a look at the podcast on apple vis yet?

----- Original Message -----
From: Victor <victorelawrence@gmail.com>
To: TechTalk@groups.io
Date: Wednesday, November 11, 2015 5:06 am
Subject: Re: [TechTalk] IPhone 6 question



I'm still trying to figure out how to use Braille screen input on my
iPad Mini 2. I'd like to type notes using this nice feature, but I
haven't figured out how to use Braille screen input in the note app.

Victor

On 11/10/15, ratshtron <northstar1950@skybeammail.com> wrote:
hmmm, i believe he was referring to the v-shape of the fingers when
typing braille on his smaller iphone like the 4s and 5s. the iphone
6, 6s, and 6plus are much larger devices
..

Legend has it that on Tuesday 11/10/2015 07:57 PM, Carolyn Arnold
said:
----------------------------------------
Right iPhone directions.

Bye for now,

Carolyn


-----Original Message-----
From: Matt [mailto:matt.from.florida@gmail.com]
Sent: Tuesday, November 10, 2015 2:34 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] IPhone 6 question

V-shape you have the iPhone confused with Android. You don't use the
V
shape to start Voice Over on the iPhone. You can do a triple click
home
or ask Siri or hook it to your computer and iTunes to turn VO (Voice
Over
) on!
Now as for as gestors go there is just so many no way we can give
all
them here and what they all do. Especially with this new 3d touch if
you
decide to keep it turn on. But there is a practice in the settings
of
the
iPhone.
You would go to settings general accessibility and then VO and after
you
click on Vo you will see it.

BTW: just a few gestor for iPhone: flick left or right flick up or
down
double tap double tap and hold three finger double tap to turn
speech
off
but leave Vo gestors in place three finger triple tap to turn screen
curtain on or off. Triple click the home key to turn voice over off
or
on
if triple click home is setup in settings.


Thanks,
Matt.from.florida@gmail.com


-----Original Message-----
From: Bill Koppelmann [mailto:billmeister@samobile.net]
Sent: Tuesday, November 10, 2015 1:38 PM
To: TechTalk@groups.io
Subject: [TechTalk] IPhone 6 question

Hi Everyone,
I'm supposed to be going to the south county AT&T store tomorrow and
we'll be getting new phones my brother and I, and I'm wondering if
any
of
you with 6s's or what have you can give me some suggestions for
special
things or shortcuts that that IPhone will do and things you can use,
and
especially how do you use and set up the braille keyboard on there?
Also,
since the screen is larger, do you still have to hold your fingers
in
that V shape, or what? I wish I could be more specific with my
questions,
but perhaps your answers will give me an alley that I can traverse
if
you
will.
Many thanks,
Bill K.

--
Bill Koppelmann
FACEBOOK: Bill.Koppelmann
skype: billblinkster
have a great day
and keep standing up for
God and our country









----------------------------------------






Sent from a Braille Sense




Sent from a Braille Sense




Sent from a Braille Sense


Re: WIRELESS COMPUTER SPEAKERS REVISITED

Quentin Christensen
 

I have a Yamaha DLNA wireless speaker that I can stream music (or any audio) to from my PC, Android, pretty sure iOS etc. I've been using Jamcast which once setup works via a basic icon in the system tray of the PC, or app on my phone. I can't recall if it does or doesn't stream from my smart TV, or if I just haven't got to trying that yet... That might depend on the brand of smart TV...

Anyway, it works great and the sound is fantastic, the only thing to be aware of, is that it's a few seconds behind, so great for streaming internet radio through the house, (I've only got the one but I believe a lot of them now are setup to ensure that if you have multiple speakers they will synchronise with each other), but it woudn't be a solution for say sitting on the desk near your laptop and listening to your screen reader through it as you work (it could certainly do that, but that ~5 second delay would get pretty frustrating very quickly!)

Kind regards

Quentin.

--
22 Point

Web: http://www.22point.com.au
Check out our "Making Windows 10 Easy" eBooks and award winning app, RapiTap!

On 11/11/2015 8:19 AM, Olusegun -- Victory Associates LTD, Inc. wrote:
Yes sire, it is of use and I'll go play with each website some more. I pretty much want WIFI stuff anyway. Much thanks!!

Sincerely,
Olusegun
Denver, Colorado




Re: Notification of Windows Updates

Matt
 

It depends on how you have it set there is four ways to set windows updates. (1) automatic, (2) notify me when updates are available and let me download and install them, (3) Download them but let me decide to install them and (4) don’t check for updates. If you choose download but don’t install them then the icon will not popup in the tray till all updates are downloaded and ready to install. If you choose automic updates you might not get nothing but a bloom telling you the updates has been downloaded and installed. If you choose do nothing then you more than likely want get no kind of notification. If you choose tell me when updates is ready to download and install it will have an icon in the tray when updates are available.

So if you choose download them but don’t install them then they will autmaiticly download them to your system but will not install them. So if you have it set this way no you don’t have to go to the control panel to download them but you will to install them. Or you can just click on the icon in the system tray!

 

 

 

From: Walt Smith [mailto:ka3lists@...]
Sent: Wednesday, November 11, 2015 5:08 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Notification of Windows Updates

 

Correction: the updates do not physically download until you actually begin the installation process from the Control Panel page.

 


From: Matt [mailto:matt.from.florida@...]
Sent: Wednesday, November 11, 2015 12:43 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Notification of Windows Updates

If you have it set for download them but let me choose to install them then yes after they all have downloaded and is ready to install an icon then will appear and you more than likely will get a popup bloom saying that. But not till they are all downloaded and ready to install.

 

 

 


Re: IPhone 6 question

Victor
 

Yes, it helped a little. I need to get familiar with all the commands
and gestures that are used when Braille screen input is on and being
used. I'd like to learn how to use the copy and paste commands while
using Braille screen input.

Thank you,

VictorOn 11/11/15, rajmund <brajmund2000@gmail.com> wrote:

Hello,
And did it help, somewhat? IF not, I can help.....

----- Original Message -----
From: Victor <victorelawrence@gmail.com>
To: TechTalk@groups.io
Date: Wednesday, November 11, 2015 7:19 am
Subject: Re: [TechTalk] IPhone 6 question



I just read a guide someone posted to Apple Vis. It was helpful.

Victor

On 11/10/15, rajmund <brajmund2000@gmail.com> wrote:
Hello,
Have you had a look at the podcast on apple vis yet?

----- Original Message -----
From: Victor <victorelawrence@gmail.com>
To: TechTalk@groups.io
Date: Wednesday, November 11, 2015 5:06 am
Subject: Re: [TechTalk] IPhone 6 question



I'm still trying to figure out how to use Braille screen input on my
iPad Mini 2. I'd like to type notes using this nice feature, but I
haven't figured out how to use Braille screen input in the note app.

Victor

On 11/10/15, ratshtron <northstar1950@skybeammail.com> wrote:
hmmm, i believe he was referring to the v-shape of the fingers when
typing braille on his smaller iphone like the 4s and 5s. the iphone
6, 6s, and 6plus are much larger devices
..

Legend has it that on Tuesday 11/10/2015 07:57 PM, Carolyn Arnold
said:
----------------------------------------
Right iPhone directions.

Bye for now,

Carolyn


-----Original Message-----
From: Matt [mailto:matt.from.florida@gmail.com]
Sent: Tuesday, November 10, 2015 2:34 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] IPhone 6 question

V-shape you have the iPhone confused with Android. You don't use the
V
shape to start Voice Over on the iPhone. You can do a triple click
home
or ask Siri or hook it to your computer and iTunes to turn VO (Voice
Over
) on!
Now as for as gestors go there is just so many no way we can give
all
them here and what they all do. Especially with this new 3d touch if
you
decide to keep it turn on. But there is a practice in the settings
of
the
iPhone.
You would go to settings general accessibility and then VO and after
you
click on Vo you will see it.

BTW: just a few gestor for iPhone: flick left or right flick up or
down
double tap double tap and hold three finger double tap to turn
speech
off
but leave Vo gestors in place three finger triple tap to turn screen
curtain on or off. Triple click the home key to turn voice over off
or
on
if triple click home is setup in settings.


Thanks,
Matt.from.florida@gmail.com


-----Original Message-----
From: Bill Koppelmann [mailto:billmeister@samobile.net]
Sent: Tuesday, November 10, 2015 1:38 PM
To: TechTalk@groups.io
Subject: [TechTalk] IPhone 6 question

Hi Everyone,
I'm supposed to be going to the south county AT&T store tomorrow and
we'll be getting new phones my brother and I, and I'm wondering if
any
of
you with 6s's or what have you can give me some suggestions for
special
things or shortcuts that that IPhone will do and things you can use,
and
especially how do you use and set up the braille keyboard on there?
Also,
since the screen is larger, do you still have to hold your fingers
in
that V shape, or what? I wish I could be more specific with my
questions,
but perhaps your answers will give me an alley that I can traverse
if
you
will.
Many thanks,
Bill K.

--
Bill Koppelmann
FACEBOOK: Bill.Koppelmann
skype: billblinkster
have a great day
and keep standing up for
God and our country









----------------------------------------






Sent from a Braille Sense




Sent from a Braille Sense




Re: Notification of Windows Updates

Walt Smith
 

Correction: the updates do not physically download until you actually begin the installation process from the Control Panel page.



From: Matt [mailto:matt.from.florida@...]
Sent: Wednesday, November 11, 2015 12:43 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Notification of Windows Updates

If you have it set for download them but let me choose to install them then yes after they all have downloaded and is ready to install an icon then will appear and you more than likely will get a popup bloom saying that. But not till they are all downloaded and ready to install.

 

 

 


Re: Notification of Windows Updates

Walt Smith
 

Gerald -
 
I just found out how this works today, having made that identical change on my Windows 7 system last week. When I attempted to logoff; which is the default performance when I hit Alt+F4 from the Desktop (I keep my system running nearly all the time, but at the login screen where my wife or I can access our individual accounts); I was prompted to "Install updates and shut down." I *think* that I also might have had a message in the System Tray, but I'm not sure about that. In any case, I had 15 Important updates to install and 1 Optional update, which I turned down because it didn't apply to my system.



From: Gerald Levy [mailto:bwaylimited@...]
Sent: Wednesday, November 11, 2015 12:27 PM
To: TechTalk@groups.io
Subject: [TechTalk] Notification of Windows Updates

 
On my Windows 7PC, I just changed my Windows Update setting from the default, automatic updates to the second option, “download updates, but let me choose whether to install them”.  So my question is this: is an icon supposed to appear in the System Tray to notify you that Windows updates are available for installation?  Or is it necessary to manually check the Windows Update page every few days to obtain this information?
 
Gerald
 


Re: WIRELESS COMPUTER SPEAKERS REVISITED

Jeremy <icu8it2@...>
 

I'm not quite sure, on the device you're using, but I'd guess that it should connect like you would with any other Bluetooth device. The jambox should not require any 4 digit codes or anything to connect, you should just be able to select it in the list of nearby devices and tell it to connect. As for placing the Jambox into pairing mode, if you do not have it connected to any devices, it should automatically go into pairing mode when you turn it on. The voice thing should tell you that it's ready to be paired. If you want to have it pair with something new, the button below the power button on the right hand side of the speaker should do it. I think you have to hold it for a few seconds, but the voice will let you know when it's ready to be paired.

These are the steps I used to get it connected to my IPhone, so hopefully it should be similar with your player.
Once I went into my Bluetooth settings on the phone and made sure that it was turned on, I then turned on the speaker by holding the power button for a few seconds.
Once the speaker had turned on and the voice had told me it was ready to be paired, I was able to see it show up in the list of nearby devices a second or two later. It showed up as Big Jambox. I then double tapped it and waited another few seconds and the speaker told me that pairing had been completed. It was then that Voiceover and other sounds were coming through the speaker, as pretty as you please.
Hope this helps.
Take care.
Blessings.

On 11/11/2015 1:06 PM, Pamela Dominguez wrote:
Hi! Sorry, I have not been following this thread. I have a jam box I bought last year. I usually use it with a cable. How would I go about using it with bluetooth? I have never done that. I want to hook up my Sansa player to it using bluetooth. So, what would I do? Pam.

-----Original Message----- From: Jeremy
Sent: Wednesday, November 11, 2015 12:16 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] WIRELESS COMPUTER SPEAKERS REVISITED

I just purchased a really nice speaker from a4c, for about 100 bucks.
The bigger version of the Jambox, normally priced at around 300 has been
on discount for a few days now. Not only is it bluetooth compatible, you
can also use a cable to connect it to your computer or whatever through
the normal headphone type output. Since this speaker is a few years old
now, the BT protocol is 2.1, but most newer bt chips, either external
ones or those found in newer devices like IPhones and android devices
should be backward compatible. As Thomas pointed out, your range is
going to be around 30 feet or so for BT, so probably not the best thing
if you want speakers all around your house, but it's working beautifully
here in my setup, which is fairly wide spread.
Take care.

On 11/11/2015 1:34 AM, Thomas N. Chan wrote:
From what I understand and seen, airplay enable or capability speaker are generally more expensive than bt ones. Bt ones are more compatible with a lot of platform including IOS, android, PC and mac etc.

Bt speakers have limitation of transmitting high quality sound up to a certain range if you are listening to certain type of music.
Don’t know the technical number of it, but if you are comparing with those which run on its own proprietary, they generally have a better range of sound and
sound... much better. Of course, they cost generally, much higher.

Bt speaker are much much more common and I would say, that's where the cost its much lower. I can buy one and use on my laptop, computer, pair with my Ipad, or even Samsung tablet, or even with my mobile phones like android or even IOS.
Its almost endless so long the device have its own or some sort of bt transmitter.

If you want to have good sound, real good sound, try to look at the Logitech wireless speaker or even creative new range. Bose I am yet to hear them at work so I can't really comment.

But right now, myself I am looking at the platronic sport earphones which its bt in nature.

--------------------
regards
Thomas N. Chan
-----Original Message-----
From: Aman Singer [mailto:aman.singer@gmail.com]
Sent: Wednesday, 11 November 2015 2:36 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] WIRELESS COMPUTER SPEAKERS REVISITED

Hi Olusegun,

You ask:
Is it safe to assume that all wireless computer speakers are the Bluetooth
ones?
In a word, no. There are Bluetooth speakers, of course, but there are
wireless speakers using their own protocols, wireless audio
transmitters, and speakers which work over wifi. Just for example
Bluetooth:
http://www.cnet.com/topics/speakers/best-speakers/bluetooth/
proprietary wireless
http://www.sonos.com
Wireless audio transmitters/receivers
http://audioengineusa.com/
wifi
https://www.rogueamoeba.com/airfoil/
Which you want is a matter dependent on the use you're going to make
of the speaker. The speaker you want for playing classical music for a
person with good ears will be different from the set you'll want for
playing a speech synthesizer to a person who wants to get the work
done as quickly as possible.
I hope that's of use.
Aman

On 11/10/15, Olusegun -- Victory Associates LTD, Inc.
<ukekearuaro@valtdnet.com> wrote:
Hello Everyone:

Ok, I keep wanting to CUT THE WIRES so I can trade them on Wall Street
<smile>!

I've been in the market for wireless computer speakers for quite some time
and I keep running into brickwalls in my search.

Is it safe to assume that all wireless computer speakers are the Bluetooth
ones?

I guess not knowing for sure is a reason why I keep slamming my head into
the wall, 'ouch, it hurts! Much thanks for all help.

Sincerely,
Olusegun
Denver, Colorado














Re: Router questions

Blaster
 

It looks like you need to set the security to none to access wep mode.

Here's a link on how to do this:
https://support.apple.com/kb/PH5086?locale=en_US

HTH,
Blaster

On 11/11/15, Donald L. Roberts <donald.roberts99@gmail.com> wrote:
My router is an Airport Extreme which is working very well. I am using
w p a 2 as an encryption protocol. There are two networks set up on the
router, one of which is labeled as a guest network. I want the main
network to use W P A 2 protocol, but I want the guest network to use W E
P which, if my understanding is correct, is the only protocol supported
by my Pacmate. So, in summary, I want one network to be W P A 2 with
one password, and the other network to use W E P with a different
password. Is this possible; and if so, how is it done.

I am aware of the vulnerability when using W E P, but if my
understanding about the Pacmate is correct, then W E P is my only option.

Thanks in advance for responses.

Don Roberts






Re: WIRELESS COMPUTER SPEAKERS REVISITED

Pamela Dominguez
 

Hi! Sorry, I have not been following this thread. I have a jam box I bought last year. I usually use it with a cable. How would I go about using it with bluetooth? I have never done that. I want to hook up my Sansa player to it using bluetooth. So, what would I do? Pam.

-----Original Message-----
From: Jeremy
Sent: Wednesday, November 11, 2015 12:16 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] WIRELESS COMPUTER SPEAKERS REVISITED

I just purchased a really nice speaker from a4c, for about 100 bucks.
The bigger version of the Jambox, normally priced at around 300 has been
on discount for a few days now. Not only is it bluetooth compatible, you
can also use a cable to connect it to your computer or whatever through
the normal headphone type output. Since this speaker is a few years old
now, the BT protocol is 2.1, but most newer bt chips, either external
ones or those found in newer devices like IPhones and android devices
should be backward compatible. As Thomas pointed out, your range is
going to be around 30 feet or so for BT, so probably not the best thing
if you want speakers all around your house, but it's working beautifully
here in my setup, which is fairly wide spread.
Take care.

On 11/11/2015 1:34 AM, Thomas N. Chan wrote:
From what I understand and seen, airplay enable or capability speaker are generally more expensive than bt ones. Bt ones are more compatible with a lot of platform including IOS, android, PC and mac etc.

Bt speakers have limitation of transmitting high quality sound up to a certain range if you are listening to certain type of music.
Don’t know the technical number of it, but if you are comparing with those which run on its own proprietary, they generally have a better range of sound and
sound... much better. Of course, they cost generally, much higher.

Bt speaker are much much more common and I would say, that's where the cost its much lower. I can buy one and use on my laptop, computer, pair with my Ipad, or even Samsung tablet, or even with my mobile phones like android or even IOS.
Its almost endless so long the device have its own or some sort of bt transmitter.

If you want to have good sound, real good sound, try to look at the Logitech wireless speaker or even creative new range. Bose I am yet to hear them at work so I can't really comment.

But right now, myself I am looking at the platronic sport earphones which its bt in nature.

--------------------
regards
Thomas N. Chan
-----Original Message-----
From: Aman Singer [mailto:aman.singer@gmail.com]
Sent: Wednesday, 11 November 2015 2:36 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] WIRELESS COMPUTER SPEAKERS REVISITED

Hi Olusegun,

You ask:
Is it safe to assume that all wireless computer speakers are the Bluetooth
ones?
In a word, no. There are Bluetooth speakers, of course, but there are
wireless speakers using their own protocols, wireless audio
transmitters, and speakers which work over wifi. Just for example
Bluetooth:
http://www.cnet.com/topics/speakers/best-speakers/bluetooth/
proprietary wireless
http://www.sonos.com
Wireless audio transmitters/receivers
http://audioengineusa.com/
wifi
https://www.rogueamoeba.com/airfoil/
Which you want is a matter dependent on the use you're going to make
of the speaker. The speaker you want for playing classical music for a
person with good ears will be different from the set you'll want for
playing a speech synthesizer to a person who wants to get the work
done as quickly as possible.
I hope that's of use.
Aman

On 11/10/15, Olusegun -- Victory Associates LTD, Inc.
<ukekearuaro@valtdnet.com> wrote:
Hello Everyone:

Ok, I keep wanting to CUT THE WIRES so I can trade them on Wall Street
<smile>!

I've been in the market for wireless computer speakers for quite some time
and I keep running into brickwalls in my search.

Is it safe to assume that all wireless computer speakers are the Bluetooth
ones?

I guess not knowing for sure is a reason why I keep slamming my head into
the wall, 'ouch, it hurts! Much thanks for all help.

Sincerely,
Olusegun
Denver, Colorado









Re: Notification of Windows Updates

Mike B <mb69mach1@...>
 


Hi Gerald,
 
I ran across a tip on how to set the time for how long balloon messages will stay up so you can have time to access them.  Here you go;
 
In Windows 7 it's under "Ease of Access".  Type Ease of Access in to the
search box in the start prompt. In the Ease of Access Center go to, "Make  it
easier to focus on tasks", and hit enter.
Near the end of the options that come up is a combobox with different time settings to adjust the time
that those balloons stay on screen.
I adjusted mine to 1 minute which gives me enough time to find them and
click on them.  Hope this helps.  Take care.
Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers, next year anyways!

----- Original Message -----
Sent: Wednesday, November 11, 2015 9:55 AM
Subject: Re: [TechTalk] Notification of Windows Updates

 
Just to be clear.  Are you saying that a static icon will be displayed in the System Tray?  Or will one of those balloons pop up and quickly vanish before I have a chance to activate it?Or will I get both types of notification?
 
Gerald
 
 
 
From: Matt
Sent: Wednesday, November 11, 2015 12:42 PM
Subject: Re: [TechTalk] Notification of Windows Updates
 

If you have it set for download them but let me choose to install them then yes after they all have downloaded and is ready to install an icon then will appear and you more than likely will get a popup bloom saying that. But not till they are all downloaded and ready to install.

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Wednesday, November 11, 2015 12:27 PM
To: TechTalk@groups.io
Subject: [TechTalk] Notification of Windows Updates

 

 

On my Windows 7PC, I just changed my Windows Update setting from the default, automatic updates to the second option, “download updates, but let me choose whether to install them”.  So my question is this: is an icon supposed to appear in the System Tray to notify you that Windows updates are available for installation?  Or is it necessary to manually check the Windows Update page every few days to obtain this information?

 

Gerald

 

 


internet explorer help needed

Dennis <dennisl1982@...>
 

Hi, I am using IE 11 how do I not have it save anything? For example if I
log in to gmail it wants to save it I don't want this thanks.


Need Audio Bible in daisy format

Donald L. Roberts
 

Has anyone compiled a list of Bibles in audio daisy format? I haven't run across many Bibles in daisy format, and most only go to the chapter level. I really would love to find something where one can search to the verse level.

I think I remember seeing one which used synthetic speech which is fine for my purposes, but I can't remember where I saw it. Because there are likely so few from which to choose, I can't be too concerned about which Bible version is available. So thanks to someone who can point me in the right direction.

Don Roberts


Router questions

Donald L. Roberts
 

My router is an Airport Extreme which is working very well. I am using w p a 2 as an encryption protocol. There are two networks set up on the router, one of which is labeled as a guest network. I want the main network to use W P A 2 protocol, but I want the guest network to use W E P which, if my understanding is correct, is the only protocol supported by my Pacmate. So, in summary, I want one network to be W P A 2 with one password, and the other network to use W E P with a different password. Is this possible; and if so, how is it done.

I am aware of the vulnerability when using W E P, but if my understanding about the Pacmate is correct, then W E P is my only option.

Thanks in advance for responses.

Don Roberts


Re: Notification of Windows Updates

Matt
 

Both will happen . You can customize how long the bloom thing stays up . I think it is in the ease of access settings.

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Wednesday, November 11, 2015 12:56 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Notification of Windows Updates

 

 

Just to be clear.  Are you saying that a static icon will be displayed in the System Tray?  Or will one of those balloons pop up and quickly vanish before I have a chance to activate it?Or will I get both types of notification?

 

Gerald

 

 

 

From: Matt

Sent: Wednesday, November 11, 2015 12:42 PM

Subject: Re: [TechTalk] Notification of Windows Updates

 

If you have it set for download them but let me choose to install them then yes after they all have downloaded and is ready to install an icon then will appear and you more than likely will get a popup bloom saying that. But not till they are all downloaded and ready to install.

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Wednesday, November 11, 2015 12:27 PM
To: TechTalk@groups.io
Subject: [TechTalk] Notification of Windows Updates

 

 

On my Windows 7PC, I just changed my Windows Update setting from the default, automatic updates to the second option, “download updates, but let me choose whether to install them”.  So my question is this: is an icon supposed to appear in the System Tray to notify you that Windows updates are available for installation?  Or is it necessary to manually check the Windows Update page every few days to obtain this information?

 

Gerald

 

 


Re: Notification of Windows Updates

Gerald Levy
 

 
Just to be clear.  Are you saying that a static icon will be displayed in the System Tray?  Or will one of those balloons pop up and quickly vanish before I have a chance to activate it?Or will I get both types of notification?
 
Gerald
 
 
 

From: Matt
Sent: Wednesday, November 11, 2015 12:42 PM
Subject: Re: [TechTalk] Notification of Windows Updates
 

If you have it set for download them but let me choose to install them then yes after they all have downloaded and is ready to install an icon then will appear and you more than likely will get a popup bloom saying that. But not till they are all downloaded and ready to install.

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Wednesday, November 11, 2015 12:27 PM
To: TechTalk@groups.io
Subject: [TechTalk] Notification of Windows Updates

 

 

On my Windows 7PC, I just changed my Windows Update setting from the default, automatic updates to the second option, “download updates, but let me choose whether to install them”.  So my question is this: is an icon supposed to appear in the System Tray to notify you that Windows updates are available for installation?  Or is it necessary to manually check the Windows Update page every few days to obtain this information?

 

Gerald

 

 


Podcast from Misty access

Matt
 

Well this one is all about stocking stuffers . Now they don’t say where to go to order these things I assume from the misty access site. But not sure. See link to podcast below.

 

http://media.blubrry.com/assistivetech/www.mysticaccesspodcast.com/audio/mp98stockingstuffers1109.mp3

 

 

Thanks,

Matt.from.florida@...

 

95801 - 95820 of 103329