----- Original Message -----

From: Sylvia

To: TechTalk@groups.io

Sent: Friday, November 13, 2015 11:01 AM

Subject: Re: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

Hi Carlos, thank you for the clarification. The reason I mentioned this software is because I recently had to remove a browser hijacker from my laptop and I used ADW cleanrer to get rid of it.

 

 

 

From: Carlos [mailto:carlos1106@...]
Sent: Friday, November 13, 2015 11:00 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello Sylvia,

ADW cleaner is not a malware scanner.  It removes toolbars, adware, and other similar unwanted promotional software, but it does not remove destructive malware and cannot substitute for a malware scanner like Malwarebytes.

----- Original Message -----

From: Sylvia

To: TechTalk@groups.io

Sent: Friday, November 13, 2015 10:44 AM

Subject: Re: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello, I haven’t used spy hunter, however, I can suggest a program that should be able to get rid of those nasty infections. Its called ADW cleaner.

 

 

 

From: Cristóbal [mailto:crismunoz54@...]
Sent: Friday, November 13, 2015 10:42 AM
To: TechTalk@groups.io
Subject: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello list,

So I don’t know how, but it seems I have some malware on one of my desktop machines called System Healer. Browser hijacker, redirector, false positives with prompts to buy protection tools, etc.

In any event, Looking around on how to remove it, I come across the solution of using Spy Hunter. I’m a Malwarebytes user and on this particular machine, I simply hadn’t’ gotten around to installing Malwarebytes (oh well). I downloaded and ran a demo version of Malwarebytes (V 1.75) but the machine comes up clean even though I still see System healer on my computer.

My question is this, is there a way to specifically target a process or folder or file to scan and quarantine with Malwarebytes? Searching around, I can select a drive or type of scan (full, quick or flash), but can’t find anything to target a particular folder/file/process.

That aside, has anyone used Spy Hunter and have they found it to be accessible with Jaws? In my case, JFW 17. Naturally, the scan and detect aspects are free, but removal is only with a license. I’m not against paying for a malware tool. I’ve got a paid version of Malwarebytes on my personal laptop, but before I go and shell out $30 or $40, I’d like to know whether I would even be able to use it at all without calling over the sighted wife to the rescue.

Alternatively, has anyone dealt with this program and were they able to remove it from their system with any particular tool that is reasonably Jaws accessible? There are manual instructions on how to remove System healer, but they involve delving into the registry, other system files and so on. I’d prefer not to go that route if possible.

 

Thanks,

Cristobal

 

----- Original Message -----

From: Sylvia

To: TechTalk@groups.io

Sent: Friday, November 13, 2015 10:44 AM

Subject: Re: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello, I haven’t used spy hunter, however, I can suggest a program that should be able to get rid of those nasty infections. Its called ADW cleaner.

 

 

 

From: Cristóbal [mailto:crismunoz54@...]
Sent: Friday, November 13, 2015 10:42 AM
To: TechTalk@groups.io
Subject: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello list,

So I don’t know how, but it seems I have some malware on one of my desktop machines called System Healer. Browser hijacker, redirector, false positives with prompts to buy protection tools, etc.

In any event, Looking around on how to remove it, I come across the solution of using Spy Hunter. I’m a Malwarebytes user and on this particular machine, I simply hadn’t’ gotten around to installing Malwarebytes (oh well). I downloaded and ran a demo version of Malwarebytes (V 1.75) but the machine comes up clean even though I still see System healer on my computer.

My question is this, is there a way to specifically target a process or folder or file to scan and quarantine with Malwarebytes? Searching around, I can select a drive or type of scan (full, quick or flash), but can’t find anything to target a particular folder/file/process.

That aside, has anyone used Spy Hunter and have they found it to be accessible with Jaws? In my case, JFW 17. Naturally, the scan and detect aspects are free, but removal is only with a license. I’m not against paying for a malware tool. I’ve got a paid version of Malwarebytes on my personal laptop, but before I go and shell out $30 or $40, I’d like to know whether I would even be able to use it at all without calling over the sighted wife to the rescue.

Alternatively, has anyone dealt with this program and were they able to remove it from their system with any particular tool that is reasonably Jaws accessible? There are manual instructions on how to remove System healer, but they involve delving into the registry, other system files and so on. I’d prefer not to go that route if possible.

 

Thanks,

Cristobal

----- Original Message -----

From: Sylvia

To: TechTalk@groups.io

Sent: Friday, November 13, 2015 10:44 AM

Subject: Re: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

Hello, I haven’t used spy hunter, however, I can suggest a program that should be able to get rid of those nasty infections. Its called ADW cleaner.

 

 

 

From: Cristóbal [mailto:crismunoz54@...]
Sent: Friday, November 13, 2015 10:42 AM
To: TechTalk@groups.io
Subject: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

 

Hello list,

So I don’t know how, but it seems I have some malware on one of my desktop machines called System Healer. Browser hijacker, redirector, false positives with prompts to buy protection tools, etc.

In any event, Looking around on how to remove it, I come across the solution of using Spy Hunter. I’m a Malwarebytes user and on this particular machine, I simply hadn’t’ gotten around to installing Malwarebytes (oh well). I downloaded and ran a demo version of Malwarebytes (V 1.75) but the machine comes up clean even though I still see System healer on my computer.

My question is this, is there a way to specifically target a process or folder or file to scan and quarantine with Malwarebytes? Searching around, I can select a drive or type of scan (full, quick or flash), but can’t find anything to target a particular folder/file/process.

That aside, has anyone used Spy Hunter and have they found it to be accessible with Jaws? In my case, JFW 17. Naturally, the scan and detect aspects are free, but removal is only with a license. I’m not against paying for a malware tool. I’ve got a paid version of Malwarebytes on my personal laptop, but before I go and shell out $30 or $40, I’d like to know whether I would even be able to use it at all without calling over the sighted wife to the rescue.

Alternatively, has anyone dealt with this program and were they able to remove it from their system with any particular tool that is reasonably Jaws accessible? There are manual instructions on how to remove System healer, but they involve delving into the registry, other system files and so on. I’d prefer not to go that route if possible.

 

Thanks,

Cristobal

----- Original Message -----

From: Cristóbal

To: TechTalk@groups.io

Sent: Friday, November 13, 2015 10:41 AM

Subject: [TechTalk] Removing System Healer with Malwarebytes or Spy Hunter

Hello list,

So I don’t know how, but it seems I have some malware on one of my desktop machines called System Healer. Browser hijacker, redirector, false positives with prompts to buy protection tools, etc.

In any event, Looking around on how to remove it, I come across the solution of using Spy Hunter. I’m a Malwarebytes user and on this particular machine, I simply hadn’t’ gotten around to installing Malwarebytes (oh well). I downloaded and ran a demo version of Malwarebytes (V 1.75) but the machine comes up clean even though I still see System healer on my computer.

My question is this, is there a way to specifically target a process or folder or file to scan and quarantine with Malwarebytes? Searching around, I can select a drive or type of scan (full, quick or flash), but can’t find anything to target a particular folder/file/process.

That aside, has anyone used Spy Hunter and have they found it to be accessible with Jaws? In my case, JFW 17. Naturally, the scan and detect aspects are free, but removal is only with a license. I’m not against paying for a malware tool. I’ve got a paid version of Malwarebytes on my personal laptop, but before I go and shell out $30 or $40, I’d like to know whether I would even be able to use it at all without calling over the sighted wife to the rescue.

Alternatively, has anyone dealt with this program and were they able to remove it from their system with any particular tool that is reasonably Jaws accessible? There are manual instructions on how to remove System healer, but they involve delving into the registry, other system files and so on. I’d prefer not to go that route if possible.

 

Thanks,

Cristobal

 

Hello list,

So I don’t know how, but it seems I have some malware on one of my desktop machines called System Healer. Browser hijacker, redirector, false positives with prompts to buy protection tools, etc.

In any event, Looking around on how to remove it, I come across the solution of using Spy Hunter. I’m a Malwarebytes user and on this particular machine, I simply hadn’t’ gotten around to installing Malwarebytes (oh well). I downloaded and ran a demo version of Malwarebytes (V 1.75) but the machine comes up clean even though I still see System healer on my computer.

My question is this, is there a way to specifically target a process or folder or file to scan and quarantine with Malwarebytes? Searching around, I can select a drive or type of scan (full, quick or flash), but can’t find anything to target a particular folder/file/process.

That aside, has anyone used Spy Hunter and have they found it to be accessible with Jaws? In my case, JFW 17. Naturally, the scan and detect aspects are free, but removal is only with a license. I’m not against paying for a malware tool. I’ve got a paid version of Malwarebytes on my personal laptop, but before I go and shell out $30 or $40, I’d like to know whether I would even be able to use it at all without calling over the sighted wife to the rescue.

Alternatively, has anyone dealt with this program and were they able to remove it from their system with any particular tool that is reasonably Jaws accessible? There are manual instructions on how to remove System healer, but they involve delving into the registry, other system files and so on. I’d prefer not to go that route if possible.

 

Thanks,

Cristobal

I'm not sure how it happened, but it appears that Amazon thinks that I

Hi guys, my wife has noticed in the last few days, that her Nexus4
smart phone has the following Issues.

No incoming ring tone, no message alert tones, and her facebook tones
are no longer working either.

Anyone know what the problem might be?, Billy

----- Original Message -----

From: Gene

To: TechTalk@groups.io

Sent: Thursday, November 12, 2015 8:39 PM

Subject: Re: [TechTalk] problems with a webpage

What screen-reader are you using?  If you go to the page from which you attempt to download an add on, what happens when you follow the link?  A message should come up asking you for permission to download the add on or something of the sort.  I don't often download add ons and I don't recall just what you will see.  It may be that your screen-reader isn't automatically reading the messages.

 

Gene

----- Original Message -----

From: Keith S

Sent: Thursday, November 12, 2015 8:00 PM

To: TechTalk@groups.io

Subject: Re: [TechTalk] problems with a webpage

okay, in that case, is there any step by step directions for me to get plugins for firefox.  I've tried the things Gene has told me to do to download and install plugins and addons like webvism and plain old favorites and navigation sounds and nothing happens and I do not see the install commands for these addons.

 

Thanks

 

Keith

----- Original Message -----

From: Gene

To: TechTalk@groups.io

Sent: Thursday, November 12, 2015 2:43 PM

Subject: Re: [TechTalk] problems with a webpage

Cookies, despite what the site says, are very unlikely the cause of the problem.  IE8 is archaic and some sites don't allow it to be used any longer.  If you are going to use Windows XP, it's a very bad idea to needlessly expose yourself to dangers such as malware by using an archaic browser.  Firefox supports XP and you can keep it updated.  The updated versions continue to work in XP. 

 

Browsing is identical or just about identical because you are using your screen-reader's commands.  There are some things to learn about the interface such as that alt b opens bookmarks and that control l takes you to the address bar.  Control o doesn't do what it does in IE8.  In Firefox, it is the command for opening a file in the browser.  It doesn't open the open dialog. 

 

Gene

----- Original Message -----

From: Keith S

Sent: Thursday, November 12, 2015 2:27 PM

To: TechTalk@groups.io

Subject: [TechTalk] problems with a webpage

Hi, running windows xp sp 3 with IE 8 and tried to go to a online petition page that I wanted to start a petition on.  When I IE finished loadeding the page, I got the following error message:

 

Please enable cookies.
Error 1010 Ray ID: 2444f2cc23b13876 • 2015-11-12 20:22:20 UTC
Access denied
What happened?
The owner of this website (www.change.org) has banned your access based on your browser's
signature (2444f2cc23b13876-ua87).
CloudFlare Ray ID: 2444f2cc23b13876
•
 Your IP: 50.44.239.158
•
 Performance & security by
CloudFlare

 

How do I check to see if cookies are enabled?  I thought they were, becuase when I log onto facebook, my user ID and password are already entered in the edit fields.  I thought cookies handled that sort of stuff.  If I am mistaken, could somoene either let me know how to enable cookies, or point me in the right direction?

 

Thanks

 

Keith

Hi guys, my wife has noticed in the last few days, that her Nexus4 smart
phone has the following Issues.

No incoming ring tone, no message alert tones, and her facebook tones are no
longer working either.

Anyone know what the problem might be?, Billy

I was on another freelist. but that gone down too.

-----Original Message-----
From: rajmund
Sent: Thursday, November 12, 2015 5:14 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Router questions

Hello,
Freelists, as well? wow! Where was it announced? Sent from an iPad. Please
excuse any spelling errors.

On 12 Nov 2015, at 9:10 p.m., Rishi D Mack <mackrishi@...> wrote:

Yeah. also, they're going from freelists too. Not sure bout yahoo yet.

-----Original Message----- From: rajmund
Sent: Thursday, November 12, 2015 3:58 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Router questions

Hello,Every audio sharing list, to my knowledge, is gone, as long as they
were on groups.io.

Sent from an iPad. Please excuse any spelling errors.

On 12 Nov 2015, at 6:39 p.m., angelsonsAna <anaglobe@...> wrote:

Hello there, is audio tracks still going? and can anyone subscribe?

-----Original Message----- From: Rishi D Mack
Sent: Thursday, November 12, 2015 1:33 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Router questions

ah. sorry. Well, I end up getting it fixed. turns out was my router gone
bad. lightning fried it

-----Original Message----- From: Blaster Nil8
Sent: Thursday, November 12, 2015 10:21 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Router questions

Sorry, I'm not a facetime or Skype guy. Could you clarify your
situation? What make and model is your router? What OS are you
running? have you accessed it before and only recently lost access?
Are you saying when you type 192.168.1.1 into your browser you get a
page not found error message. Any additional information would be
helpful.

You should probably start a new thread to get more attention from the
list and to keep this list organized.

Regards,
Blaster

On 11/11/15, Rishi D Mack <mackrishi@...> wrote:
Hi, is it possible I can get some help with someone through face time,
or
Skype, to fix my Internet router? I am not seeing my default gateway,
and I
can't access my router. I really really really do need help with this if
anyone can. Thanks in advance.

Sent from my iPhone

On Nov 11, 2015, at 4:17 PM, Blaster Nil8 <blaster.nil8@...>
wrote:

It looks like you need to set the security to none to access wep mode.

Here's a link on how to do this:
https://support.apple.com/kb/PH5086"locale=en_US

HTH,
Blaster

On 11/11/15, Donald L. Roberts <donald.roberts99@...> wrote:
My router is an Airport Extreme which is working very well. I am
using
w p a 2 as an encryption protocol. There are two networks set up on
the
router, one of which is labeled as a guest network. I want the main
network to use W P A 2 protocol, but I want the guest network to use W
E
P which, if my understanding is correct, is the only protocol
supported
by my Pacmate. So, in summary, I want one network to be W P A 2 with
one password, and the other network to use W E P with a different
password. Is this possible; and if so, how is it done.

I am aware of the vulnerability when using W E P, but if my
understanding about the Pacmate is correct, then W E P is my only
option.

Thanks in advance for responses.

Don Roberts

 

Hello Sugar,

I am new to outlook.

How do I open the address book in outlook?

When I reply to a message, will the email address I am replying to go into the contact list?

This was the case in Windows live mail.

Also Sugar, How do I save an email in a folder such as an emailed recipe I want to move into a recipe folder from the inbox?

Thank you Sugar.

Bob Heiser

 

----- Original Message -----

From: Gene

To: TechTalk@groups.io

Sent: Thursday, November 12, 2015 8:39 PM

Subject: Re: [TechTalk] problems with a webpage

What screen-reader are you using?  If you go to the page from which you attempt to download an add on, what happens when you follow the link?  A message should come up asking you for permission to download the add on or something of the sort.  I don't often download add ons and I don't recall just what you will see.  It may be that your screen-reader isn't automatically reading the messages.

 

Gene

----- Original Message -----

From: Keith S

Sent: Thursday, November 12, 2015 8:00 PM

To: TechTalk@groups.io

Subject: Re: [TechTalk] problems with a webpage

okay, in that case, is there any step by step directions for me to get plugins for firefox.  I've tried the things Gene has told me to do to download and install plugins and addons like webvism and plain old favorites and navigation sounds and nothing happens and I do not see the install commands for these addons.

 

Thanks

 

Keith

----- Original Message -----

From: Gene

To: TechTalk@groups.io

Sent: Thursday, November 12, 2015 2:43 PM

Subject: Re: [TechTalk] problems with a webpage

Cookies, despite what the site says, are very unlikely the cause of the problem.  IE8 is archaic and some sites don't allow it to be used any longer.  If you are going to use Windows XP, it's a very bad idea to needlessly expose yourself to dangers such as malware by using an archaic browser.  Firefox supports XP and you can keep it updated.  The updated versions continue to work in XP. 

 

Browsing is identical or just about identical because you are using your screen-reader's commands.  There are some things to learn about the interface such as that alt b opens bookmarks and that control l takes you to the address bar.  Control o doesn't do what it does in IE8.  In Firefox, it is the command for opening a file in the browser.  It doesn't open the open dialog. 

 

Gene

----- Original Message -----

From: Keith S

Sent: Thursday, November 12, 2015 2:27 PM

To: TechTalk@groups.io

Subject: [TechTalk] problems with a webpage

Hi, running windows xp sp 3 with IE 8 and tried to go to a online petition page that I wanted to start a petition on.  When I IE finished loadeding the page, I got the following error message:

 

Please enable cookies.
Error 1010 Ray ID: 2444f2cc23b13876 • 2015-11-12 20:22:20 UTC
Access denied
What happened?
The owner of this website (www.change.org) has banned your access based on your browser's
signature (2444f2cc23b13876-ua87).
CloudFlare Ray ID: 2444f2cc23b13876
•
 Your IP: 50.44.239.158
•
 Performance & security by
CloudFlare

 

How do I check to see if cookies are enabled?  I thought they were, becuase when I log onto facebook, my user ID and password are already entered in the edit fields.  I thought cookies handled that sort of stuff.  If I am mistaken, could somoene either let me know how to enable cookies, or point me in the right direction?

 

Thanks

 

Keith