Date   

Re: email on win 10

Brian K. Lingard
 

List: Dear Richard & List:
Your PC will likely have Office 2019 you want the 64-bit edition.
Brian K. Lingard VE3YI, Ab2JI, B. A., C. T. M.


From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf of Steve Matzura
Sent: March 8, 2019 3:13 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] email on win 10

Thunderbird!


On 3/8/2019 12:25 PM, Richard Sherman wrote:
Hi folks,

getting a new windows 10 system hopefully in a couple weeks. The new
System will have office. Not sure of what office version though.

I am not a big fan of outlook. Played with it just a bit. However, love it
Simple. So therefore, a fan of outlook express. Especially since that
is what I have used all along. Even modified my win 7 system so that I
could use windows mail.

So was just wondering what alternatives there are for windows 10 when
It comes to email. I know about thunderbird and wlm. Still
looking for advice and opinions about them. As well as other programs.

Thanks in advance.

Shermanator


Re: writing checks?

Holly
 

Hi Brian:aye am using Versacheck X1 Gold 2015

. I have had this program for about 10 years and am used to it. I had to upgrade when I got Windows 7.

I know there are those who have had some issues with it, but, for me, it has been very accessible.

I had sighted assistance setting it up, but it is pretty easy to use once you get the hang of it.

You can program in all your regular deposits and withdrawals and it keeps a check register for you.

Now that I have most of my bills paid by auto-pay and 'bill pay' with my checking account, I don't write very many checks anymore, but still need it a few times a year.

Let me know what you decide.

Good luck,

Holly


Re: writing checks?

Brian K. Lingard
 

Dear Holly:
I also would like to know which cheque-printing program you are using. I can
buy Commercial Safety Paper at a Paper Merchant and have enough cheque
blanks for 2,000 cheques. Sounds like a good program.
About all you will not have are the MMICR encoding along the bottom of the
cheque with Bank, Brranch, Account number && amount information.
Brian K. Lingard VE3YI, Ab2JI, B. A., C. T. M.

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Onward bob
Sent: March 8, 2019 2:57 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] writing checks?

Hi Holly, where can I get that program and the blank check paper? Thanks

BOB SOUTAR.ONWARD THRU THE FOG


From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Holly
Sent: Friday, March 08, 2019 9:11 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] writing checks?

With all the online payment options available now, I only have to write one
or two checks a year.

However, if you are not into doing that, there are check guides available.

I, myself, have a check-printing program on my computer. When setting up
the program, you scan your signature into the program and it even prints
your signature on the checks that it prints. You use only blank check
paper, so very secure that way. No checks laying around with your bank
info.

Holly


Trouble with Outlook

Onwardbob
 

Hi, how do I set up Outlook so I can expand a thread and than delete it? I
used to be able to do this, but all of a sudden it isn't working.

BOB SOUTAR.ONWARD THRU THE FOG


Re: Comcast & IMAP

Mike B.
 

Hi Robin,
 
Thank you very much for your input.
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----
Sent: Sunday, March 17, 2019 7:03 PM
Subject: Re: [TechTalk] Comcast & IMAP

Hi,
I didn’t create any of my labels as GMail calls them or folders to the rest of the world on the site I did it in the client while accessing with IMAP and they appeared on the site just fine. I see no reason why that wouldn’t be the same with comcast. I hope that helps.
Take good care.
Robin (who loves IMAP)
 
From: Mike B
Sent: Sunday, March 17, 2019 4:07 PM
To: TechTalk
Subject: [TechTalk] Comcast & IMAP
 
Hi All,
 
Asking for an acquaintence:
    I have always used Pop 3 with my comcast account but thinking of switching to IMap. With thunderbird, is it possible to create your folders on the client or do you have to create them on the ComCast web site as with Gmail? I hate doing anything on the web site.
If using IMap, can someone tell me what the port names and numbers are for comCast?
 
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!


Re: Comcast & IMAP

Robin Frost
 

Hi,
I didn’t create any of my labels as GMail calls them or folders to the rest of the world on the site I did it in the client while accessing with IMAP and they appeared on the site just fine. I see no reason why that wouldn’t be the same with comcast. I hope that helps.
Take good care.
Robin (who loves IMAP)
 

From: Mike B
Sent: Sunday, March 17, 2019 4:07 PM
To: TechTalk
Subject: [TechTalk] Comcast & IMAP
 
Hi All,
 
Asking for an acquaintence:
    I have always used Pop 3 with my comcast account but thinking of switching to IMap. With thunderbird, is it possible to create your folders on the client or do you have to create them on the ComCast web site as with Gmail? I hate doing anything on the web site.
If using IMap, can someone tell me what the port names and numbers are for comCast?
 
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!


STREAMING DEVICES

heather albright
 

Hello, I have a firestick now but, I am trying to like it! So is the content different with an apple tv?  I know it is a different company but, wonder if the interface maybe my issue! Does anyone have both perhaps can tell me the good and the bad. Thanks Heather

"Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
e-mail:
kd5cbl@...
sites:
National Federation of The Blind:
www.nfb.org
An Accessible Online Library:
www.bookshare.org

 


Re: Forwarding Messages and BCC-ing address on Thunderbird

Mike B.
 


Hi Marcio,
 
Thank you very much.
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----
Sent: Sunday, March 17, 2019 5:34 PM
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

Oh I forget to answer the other question you just asked.

So here it goes.

Yes it's perfectly possible to create folders within Thunderbird without needing to involve your email provider's

 webpage. I believe it's also mentioned on this "cheatsheet" :)

Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:28, marcio via Groups.Io escreveu:

Mike,

It's already right on your inbox. Check it out :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:23, Mike B escreveu:

Hi Marcio,
 
Would you please send me that message as well?  Also, With thunderbird, is it possible to create your folders on the client or do you have to create them on the provider web site?  Thanks mu
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!
----- Original Message -----
Sent: Sunday, March 17, 2019 5:14 PM
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:
I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Forwarding Messages and BCC-ing address on Thunderbird

 

Oh I forget to answer the other question you just asked.

So here it goes.

Yes it's perfectly possible to create folders within Thunderbird without needing to involve your email provider's

 webpage. I believe it's also mentioned on this "cheatsheet" :)

Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:28, marcio via Groups.Io escreveu:

Mike,

It's already right on your inbox. Check it out :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:23, Mike B escreveu:

Hi Marcio,
 
Would you please send me that message as well?  Also, With thunderbird, is it possible to create your folders on the client or do you have to create them on the provider web site?  Thanks mu
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!
----- Original Message -----
Sent: Sunday, March 17, 2019 5:14 PM
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:
I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Forwarding Messages and BCC-ing address on Thunderbird

 

Mike,

It's already right on your inbox. Check it out :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:23, Mike B escreveu:


Hi Marcio,
 
Would you please send me that message as well?  Also, With thunderbird, is it possible to create your folders on the client or do you have to create them on the provider web site?  Thanks mu
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!
----- Original Message -----
Sent: Sunday, March 17, 2019 5:14 PM
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:
I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








win10 searching

Howard Traxler <howard@...>
 

Hi again all,

When I have

"this pc"

open, and I tab to a search box and type a search criteria, the system searches all places connected including system drive, thumb drives, and external storage.  How can I tell it to only search one folder or drive?  I'm sure it would be quicker and I usually know what drive my target is on.


Howard


Re: Forwarding Messages and BCC-ing address on Thunderbird

Mike B.
 


Hi Marcio,
 
Would you please send me that message as well?  Also, With thunderbird, is it possible to create your folders on the client or do you have to create them on the provider web site?  Thanks mu
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----
Sent: Sunday, March 17, 2019 5:14 PM
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:
I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Forwarding Messages and BCC-ing address on Thunderbird

Marie <magpie.mn@...>
 

Thanks much.
 
 

From: marcio via Groups.Io
Sent: Sunday, March 17, 2019 5:14 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:
I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Forwarding Messages and BCC-ing address on Thunderbird

 

Marie,
I just sent you an email with the Thunderbird cheatsheet, which  is what you requested :)

I hope this can be useful for you :)


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 17/03/2019 21:07, Marie escreveu:

I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 
From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Forwarding Messages and BCC-ing address on Thunderbird

Marie <magpie.mn@...>
 

I keep wanting to check out Thunderbird just in case WLM ever fails to run in win 10. So could you please send that document to me? Thanks.
 

From: marcio via Groups.Io
Sent: Friday, March 15, 2019 9:00 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird
 

Dear Carolin,

I just sent you an email with what I said I was going to see if I could get and such.

I hope this can be useful for you :)

 

Any doubts, questions or whatever, please let me know.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 23:39, Marcio escreveu:

Dear Carolyn,

I don't have any tutorial regarding Thunderbird, as for me, it's quite intuitive and one can learn with time and using it.

Actually, I saw one a while ago that may well meet your needs. I will see if I can get it back and send to you.


Cheers,
Marcio AKA Starboy
Follow or add me on Facebook

Em 15/03/2019 18:46, Carolyn Arnold escreveu:
Would you send any Thunder Bird tutorial to me, in case I change from Outlook to Thunderbird. These instructions that are being given make it sound like a fairly user friendly email client. 

4carolyna@...

Best regards,

Carolyn 


-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of iram shabbir
Sent: Friday, March 15, 2019 2:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird

dear sir kindly send me a tetorial or short cut commands about thunder bird. because i have to switch from windows 7 to windows 10. kindly help. regards

	----- Original Message ----- 
	From: marcio via Groups.Io mailto:marcinhorj21@...
	To: main@TechTalk.groups.io mailto:main@TechTalk.groups.io
	Sent: Thursday, March 14, 2019 9:42 AM
	Subject: Re: [TechTalk] Forwarding Messages and BCC-ing address on Thunderbird


	Abbie,

	It actually helped a lot.

	Sorry for the late answer. I'm with many, many emails to read due to changes I did on my Thunderbird.

	I now have folders to each list and well, I'm still with some lists to read about :)

	Trouble with removing headers on a forwarded message is, this info is all on tables and even removing the lines, NVDA still reports the existence of the tables now with all blank lines.

	Anyway, as Gene suggested (don't remember if it was here or on another list) I'm copying all the content from a message I want to forward, pasting it into Notepad, removing all I want to, copying again from there and pasting the new edited content into the message.

	A bit of a hard work, but it seems the only way to go. :(

	
	

	
	


	Cheers, 
	Marcio 
	AKA Starboy

	Follow or add me on Facebook <https://facebook.com/firirinfonfon>
	
	
	Em 12/03/2019 19:47, Abbie Taylor escreveu:
	

		You can delete the header in a forwarded message the same way you would delete other text. To add a CC or BCC, after typing the To recipient into that field, press Enter, and another address field will appear. Press Shift plus Tab, and you'll find a drop-down list containing the CC and BCC options. I hope this helps. 








Re: Comcast & IMAP

Jaffar Sidek
 

Hi Mike.  If you have the relevant info and fill it up correctly, Thunderbird will usually then automatically set the correct configuration for you.  However, and for your general info, the Imap protocol usually uses the standard 993 port.  Cheers!

On 3/18/2019 4:07 AM, Mike B wrote:
Hi All,
 
Asking for an acquaintence:
    I have always used Pop 3 with my comcast account but thinking of switching to IMap. With thunderbird, is it possible to create your folders on the client or do you have to create them on the ComCast web site as with Gmail? I hate doing anything on the web site.
If using IMap, can someone tell me what the port names and numbers are for comCast?
 
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!


Re: goldwave questions

Keith S
 


very cool.  this will come in handy.
 
Keith

----- Original Message -----
From: ann
Sent: Sunday, March 17, 2019 11:02 AM
Subject: Re: [TechTalk] goldwave questions

There are more things you can do as well.

After you've placed your start marker with the [ (left bracket) key,
 you can also:
Control+C to copy the selected part,
Control+X to cut,
and to paste the selected part in to it's own file, use Control+C to copy, then press Control+P, which will place what you've selected in to it's own separate file.

~Ann


On Sun, Mar 17, 2019 at 09:30 AM, Carrie Morales wrote:
it has been a while, but when I used to use it, if I remember correctly, it is open bracket to mark the beginning part and close bracket to mark where you want to stop selecting. You can press Ctrl t to trim the parts that are not selected.
 
That's all I can remember.

On Mar 17, 2019 8:51 AM, Keith S <ks.steinbach03@...> wrote:
Hello,
 
I am  planning to cut a sound file using goldwave and have a few questions.
 
First, how do I place markers where I want GW to cut the file?
 
2. how do I cut inside 2 marked points, if I set the beggining and end points?
 
3.  how do I  trim everything outside  the beginning and ending points?
 
4. how do I reset the beginning and end markers to the beginning and ends of the file respectuflly.
 
Thanks
 
Keith


Comcast & IMAP

Mike B.
 

Hi All,
 
Asking for an acquaintence:
    I have always used Pop 3 with my comcast account but thinking of switching to IMap. With thunderbird, is it possible to create your folders on the client or do you have to create them on the ComCast web site as with Gmail? I hate doing anything on the web site.
If using IMap, can someone tell me what the port names and numbers are for comCast?
 
Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!


Re: table reading commands in jaws

Troy Burnham
 

Thanks Chris that sounds even better.


Troy



On 3/17/2019 7:20 AM, chris judge wrote:

Hi Troy. You can also press insert Spacebar, followed by the letter T, to enter table reading mode. Then, if you just want to read through the columns and rows you can use the arrow keys without needing to hold control and alt.

Just press escape to leave table reading mode when you are done.

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Troy Burnham
Sent: March 16, 2019 10:08 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] table reading commands in jaws

 

Thanks Mike, this will help a lot.

 

Troy

 

 

On 3/16/2019 7:00 PM, Mike B wrote:



Here you go:

 

Tables in HTML

Summary: Tables commands. Column one contains the description and column two contains the keystroke.

 

table with 2 columns and 24 rows

Description

Command 

Next Table

Prior Table

SHIFT+T 

Select Table

F8 (when on the line that announces number of rows and columns) 

List Tables

INSERT+CTRL+T 

Jump to Table                Cell (from within a table)

CTRL+WINDOWS Key+J 

Return to Previous                Cell

CTRL+SHIFT+WINDOWS Key+J  

Current Cell

CTRL+ALT+NUM                PAD 5 

Next Cell

CTRL+ALT+RIGHT                ARROW 

Prior Cell

CTRL+ALT+LEFT                ARROW 

Cell Above

CTRL+ALT+UP                ARROW 

Cell Below

CTRL+ALT+DOWN                ARROW 

First Cell

CTRL+ALT+HOME 

Last Cell

CTRL+ALT+END 

Next Row

WINDOWS Key+ALT+DOWN ARROW  

Prior Row

WINDOWS Key+ALT+UP ARROW  

Current Row

WINDOWS Key+NUM PAD 5 

Read from Beginning                of Row to Current Cell

INSERT+SHIFT+HOME 

Read from Current                Cell to End of Row

INSERT+SHIFT+PAGE                UP  

Prior Column

WINDOWS Key+ALT+LEFT ARROW 

Current Column

WINDOWS Key+PERIOD 

Next Column

WINDOWS Key+ALT+RIGHT ARROW 

Read from Top                of Column to Current Cell

INSERT+SHIFT+END 

Read from Current                Cell to Bottom of Column

INSERT+SHIFT+PAGE                DOWN

table end

Take care.  Mike.  Sennt from my iBarstool.
Book: a utensil used to pass time while waiting for the computer repairman!

----- Original Message -----

From: Troy Burnham

Sent: Saturday, March 16, 2019 1:08 PM

Subject: [TechTalk] table reading commands in jaws

 

Hi all,


What are the commands for reading tables in jaws? I've never had to
read tables, but I just joined a fantasy baseball league where all of
the info seems to be in table form and I especially need to know how to
move from column to column. Any other commands I need to know will be
appreciated though.


Thanks.


Troy





OpenTween tutorial?

Cristóbal
 

Hello list,

I was wondering if anyone has or could point me to a tutorial for OpenTween? I’m a TW-Blue user with Jaws on the PC, but wanted to give OpenTween a spin. Installing and whatnot was easy enough, but … The interface is rather kind of funky. The help documentation as much as there is any is also really kind of rough.

Thanks,

 

 

Cristóbal

 

22581 - 22600 of 100646