Date   

NVDA user looking for older working iTunes version

Kwork
 

Hi,


The latest version of iTunes, 12.9.6.3, seems to be quite broken with NVDA. Does anyone have any installers, or even version numbers for older versions that work well? My problems come when using iTunes for PC, Windows 10 64-bit by the way, with Apple Music. Loss of focus is the norm, and it's hard to press the enter or spacebar on anything without the program losing focus completely, most ofen sending me to the Windows start menu search box.

Any help is appreciated. Older versions worked well enough, especially ones from six months ago or older, but I didn't keep track of version numbers..

Thanks.

Travis


Re: getting rid of blank lines in a word document

Gene
 

If you don't place a space In the replace with field, I would think that where hard returns are removed, you will have sentences ending and the next sentence beginning on the same line without a space.  That wouldn't be a good idea and I suspect it will cause screen-readers to not pause properly at the end of sentences where this occurs.  Also, it will cause inflection not to be correct to indicate the end and start of a new sentence.
 
Gene

----- Original Message -----
From: Mike B
Sent: Saturday, August 24, 2019 5:41 PM
Subject: Re: [TechTalk] getting rid of blank lines in a word document

Yo Kimsan,
 
Try the following:
 
While in the document, press control+h to go into your Find & Replace dialogue.
 
In the Find field, type ^p .  Carat is, Shift + 6, on the number row then type the letter, p.
 
Leave the  Replacement field blank.
 
Tab to, Replace All, and press enter or, the shortcut keystroke is, Alt + A.
 
After a bit, word will tell you that it has made xxx replacements, xxx being the number of blank lines replaced.
 
 You should get an, OK button, so press the spacebar.  You're done.
 
You may still have some blank lines, but this is the easiest way I know of to get rid of a lot of blank lines at one time.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.
----- Original Message -----
From: Gene
Sent: Saturday, August 24, 2019 2:59 PM
Subject: Re: [TechTalk] getting rid of blank lines in a word document

How are you reading the file and what screen-reader are you using?  I don't know how to remove all hard returns from documents.  But a way that might be better might be to use the speech dictionary to temporarily not say the word blank. 
 
But no solution of any kind will be necessary if you use read to end in JAWS or NVDA.  Blank won't be spoken.  I'm not sure about Window-eyes.
 
Gene
----- Original Message -----
Sent: Saturday, August 24, 2019 4:51 PM
Subject: [TechTalk] getting rid of blank lines in a word document

Hi,

I’m reading a file where it says blank blank blank quite a bit.

What do I type in the find and replace dialog to get rid of those blanks and put spaces there?.

 

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 


Re: getting rid of blank lines in a word document

Mike B <mb69mach1@...>
 

Yo Kimsan,
 
Try the following:
 
While in the document, press control+h to go into your Find & Replace dialogue.
 
In the Find field, type ^p .  Carat is, Shift + 6, on the number row then type the letter, p.
 
Leave the  Replacement field blank.
 
Tab to, Replace All, and press enter or, the shortcut keystroke is, Alt + A.
 
After a bit, word will tell you that it has made xxx replacements, xxx being the number of blank lines replaced.
 
 You should get an, OK button, so press the spacebar.  You're done.
 
You may still have some blank lines, but this is the easiest way I know of to get rid of a lot of blank lines at one time.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.

----- Original Message -----
From: Gene
Sent: Saturday, August 24, 2019 2:59 PM
Subject: Re: [TechTalk] getting rid of blank lines in a word document

How are you reading the file and what screen-reader are you using?  I don't know how to remove all hard returns from documents.  But a way that might be better might be to use the speech dictionary to temporarily not say the word blank. 
 
But no solution of any kind will be necessary if you use read to end in JAWS or NVDA.  Blank won't be spoken.  I'm not sure about Window-eyes.
 
Gene
----- Original Message -----
Sent: Saturday, August 24, 2019 4:51 PM
Subject: [TechTalk] getting rid of blank lines in a word document

Hi,

I’m reading a file where it says blank blank blank quite a bit.

What do I type in the find and replace dialog to get rid of those blanks and put spaces there?.

 

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 


Re: Request: Recommendations For Good High Capacity Router

Cristóbal
 

Once you go mesh, you’ll never go back.

We’ve got an Ero mesh set up and it covers 3400 SQFT quite well.

If you’ve got or want a lot of connected devices, mesh is probably a better bet than a tri band router.

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Saturday, August 24, 2019 11:40 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Request: Recommendations For Good High Capacity Router

 

Hi David,

 

Have you contacted Spectrum?  About 3 weeks ago I was using a Spectrum modem with a NetGear router and the router went bad, both were Spectrum equipment.  Well, they came out and replaced both the modem and router with updated new equipment and my internet has never worked this well.


Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.

----- Original Message -----

Sent: Saturday, August 24, 2019 7:35 AM

Subject: Re: [TechTalk] Request: Recommendations For Good High Capacity Router

 

Good morning, would you be able to give the model number of your router? Because we are having issues with our spectrum router. And are looking to purchase one of our own.


On Aug 24, 2019, at 9:12 AM, DJ <grouloc@...> wrote:

I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

 

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:

Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"




Re: getting rid of blank lines in a word document

Gene
 

How are you reading the file and what screen-reader are you using?  I don't know how to remove all hard returns from documents.  But a way that might be better might be to use the speech dictionary to temporarily not say the word blank. 
 
But no solution of any kind will be necessary if you use read to end in JAWS or NVDA.  Blank won't be spoken.  I'm not sure about Window-eyes.
 
Gene

----- Original Message -----
Sent: Saturday, August 24, 2019 4:51 PM
Subject: [TechTalk] getting rid of blank lines in a word document

Hi,

I’m reading a file where it says blank blank blank quite a bit.

What do I type in the find and replace dialog to get rid of those blanks and put spaces there?.

 

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 


getting rid of blank lines in a word document

Kimsan <kimsansong@...>
 

Hi,

I’m reading a file where it says blank blank blank quite a bit.

What do I type in the find and replace dialog to get rid of those blanks and put spaces there?.

 

Thank you,

Sincerely,

Kimsan Song

kimsansong@...

 


win 10 administrator

Lenny McHugh
 

Hello, I am having some problems with this new win 10 machine. I am trying to copy a file to an external drive and get the message destination folder access denied, you need permission. Using the application key on the F (ex drive letter> I tried to grant permissions. It only made the new folder name. Now trying to delete it I can just use shift delete but the delete key also gives me a denied access to the recycle folder.

Any suggestions on how to correct this. My next step will to call Microsoft support. I really hate the thought of doing that. TIA!

--

Please visit my web page
It’s motivational, inspirational with a touch of humor
There is also a very extensive resource list for the blind
: https://www.LennyMcHugh.com
International Brotherhood of Magicians member #4399


Re: Request: Recommendations For Good High Capacity Router

David L Minton, Jr
 

Yes, they came out this past week and replace the router and the modem. But they also said that the equipment they provide is not the top-notch equipment. They gave us some suggestions of routers to purchase. The routers they suggested are running about $260.


On Aug 24, 2019, at 2:39 PM, Mike B <mb69mach1@...> wrote:

Hi David,
 
Have you contacted Spectrum?  About 3 weeks ago I was using a Spectrum modem with a NetGear router and the router went bad, both were Spectrum equipment.  Well, they came out and replaced both the modem and router with updated new equipment and my internet has never worked this well.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.
----- Original Message -----
Sent: Saturday, August 24, 2019 7:35 AM
Subject: Re: [TechTalk] Request: Recommendations For Good High Capacity Router

Good morning, would you be able to give the model number of your router? Because we are having issues with our spectrum router. And are looking to purchase one of our own.


On Aug 24, 2019, at 9:12 AM, DJ <grouloc@...> wrote:

I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:
Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"





Re: Checking An iTunes Account

lynn white
 

Nope.  That did the trick.  Thank you.

On 8/24/2019 1:17 PM, joseph hudson wrote:
Hello, to look at items that have been purchased, go to the app store, Cook on updates, click on your account, then you will find the purchased area, and every amp that you have ever downloaded will show up in that area. If you're looking for something else please let me know.
On Aug 23, 2019, at 4:38 PM, lynn white <lynnwhite360@gmail.com> wrote:

Using the iPhone, how can you check your iTunes account such as purchases, etc Thanks.





Re: sounds

Sugar
 

Thank you Mike

Really, thanks to you and everyone!

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Saturday, August 24, 2019 11:35 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Hi Sugar,

 

Try it this way:

1. Press, Windows key + R, to open the run dialogue.

2. type, control panel, and press enter.

3. You are now in the control panel so press the letter, S, until you land on , Sounds, and press enter.

4. Press, control + tab, until you land on, Sounds, now tab to or 3 times to the Program Events, list and down arrow to find the email option.


Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.

----- Original Message -----

From: Smiling?

Sent: Saturday, August 24, 2019 7:03 AM

Subject: Re: [TechTalk] sounds

 

Well just try and listen to what it is that you are reading a little more because more than one option was given. Hopefully below I’ve made this clearer this time around.

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds which will be in Control Panel, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. Now you will be in the Playback Tab, just Control Tab twice until you get to the Sounds Tab or Shift Tab once and you will hear Playback Tab where you would now arrow twice to the Sounds Tab.

4. On the Sounds tab, under Program Events, under Windows, click New Mail Notification.

5. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

6. Click OK.

7. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Friday, August 23, 2019 7:41 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Thanks

That is how I use to have it by going to my system tray and doing what you said

I can’t find that option anymore

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Friday, August 23, 2019 2:58 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. On the Sound dialog box, on the Sounds tab, under Program Events, under Windows, click New Mail Notification.

4. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

5. Click OK.

6. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Thursday, August 22, 2019 1:32 PM
To: Tech Talk List
Subject: [TechTalk] sounds

 

                Hello

Using Windows 10(1903,  Jaws 2019 and office/outlook 2016, where can I find  to change the sound on my e mail?

I want to hange the current sound or chime my pc makes when I receive a new message

Before today it was easily found in my sounds/volume

I currently have this in my system tray but when I go to open it to “sounds” I can’t find where to change it.

Thanks

sugar

"I seldom think about my limitations, and they never make me sad. Perhaps there is just a touch of yearning at times; but it is vague, like a breeze among flowers."

Hellen Keller

😉

Sugar

https://www.gofundme.com/sugars-transplant-journey

 


Re: sounds

Sugar
 

Smile

Thank you for reposting as I am still working the quirks with this new jaws that was jus installed

And after working part of it last night, I read this again and this time around Jaws did pick up all that was said with no bubbing pops or dinks.

Smile

Thank you gain

It is appreciated

sugar

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Saturday, August 24, 2019 7:04 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Well just try and listen to what it is that you are reading a little more because more than one option was given. Hopefully below I’ve made this clearer this time around.

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds which will be in Control Panel, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. Now you will be in the Playback Tab, just Control Tab twice until you get to the Sounds Tab or Shift Tab once and you will hear Playback Tab where you would now arrow twice to the Sounds Tab.

4. On the Sounds tab, under Program Events, under Windows, click New Mail Notification.

5. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

6. Click OK.

7. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Friday, August 23, 2019 7:41 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Thanks

That is how I use to have it by going to my system tray and doing what you said

I can’t find that option anymore

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Friday, August 23, 2019 2:58 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. On the Sound dialog box, on the Sounds tab, under Program Events, under Windows, click New Mail Notification.

4. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

5. Click OK.

6. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Thursday, August 22, 2019 1:32 PM
To: Tech Talk List
Subject: [TechTalk] sounds

 

                Hello

Using Windows 10(1903,  Jaws 2019 and office/outlook 2016, where can I find  to change the sound on my e mail?

I want to hange the current sound or chime my pc makes when I receive a new message

Before today it was easily found in my sounds/volume

I currently have this in my system tray but when I go to open it to “sounds” I can’t find where to change it.

Thanks

sugar

"I seldom think about my limitations, and they never make me sad. Perhaps there is just a touch of yearning at times; but it is vague, like a breeze among flowers."

Hellen Keller

😉

Sugar

https://www.gofundme.com/sugars-transplant-journey

 


Re: sounds

Sugar
 

Tank you

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Saturday, August 24, 2019 7:04 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Well just try and listen to what it is that you are reading a little more because more than one option was given. Hopefully below I’ve made this clearer this time around.

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds which will be in Control Panel, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. Now you will be in the Playback Tab, just Control Tab twice until you get to the Sounds Tab or Shift Tab once and you will hear Playback Tab where you would now arrow twice to the Sounds Tab.

4. On the Sounds tab, under Program Events, under Windows, click New Mail Notification.

5. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

6. Click OK.

7. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Friday, August 23, 2019 7:41 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Thanks

That is how I use to have it by going to my system tray and doing what you said

I can’t find that option anymore

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Friday, August 23, 2019 2:58 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. On the Sound dialog box, on the Sounds tab, under Program Events, under Windows, click New Mail Notification.

4. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

5. Click OK.

6. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Thursday, August 22, 2019 1:32 PM
To: Tech Talk List
Subject: [TechTalk] sounds

 

                Hello

Using Windows 10(1903,  Jaws 2019 and office/outlook 2016, where can I find  to change the sound on my e mail?

I want to hange the current sound or chime my pc makes when I receive a new message

Before today it was easily found in my sounds/volume

I currently have this in my system tray but when I go to open it to “sounds” I can’t find where to change it.

Thanks

sugar

"I seldom think about my limitations, and they never make me sad. Perhaps there is just a touch of yearning at times; but it is vague, like a breeze among flowers."

Hellen Keller

😉

Sugar

https://www.gofundme.com/sugars-transplant-journey

 


Re: Request: Recommendations For Good High Capacity Router

Mike B <mb69mach1@...>
 

Hi David,
 
Have you contacted Spectrum?  About 3 weeks ago I was using a Spectrum modem with a NetGear router and the router went bad, both were Spectrum equipment.  Well, they came out and replaced both the modem and router with updated new equipment and my internet has never worked this well.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.

----- Original Message -----
Sent: Saturday, August 24, 2019 7:35 AM
Subject: Re: [TechTalk] Request: Recommendations For Good High Capacity Router

Good morning, would you be able to give the model number of your router? Because we are having issues with our spectrum router. And are looking to purchase one of our own.


On Aug 24, 2019, at 9:12 AM, DJ <grouloc@...> wrote:

I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:
Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"





Re: sounds

Mike B <mb69mach1@...>
 


Hi Sugar,
 
Try it this way:
1. Press, Windows key + R, to open the run dialogue.
2. type, control panel, and press enter.
3. You are now in the control panel so press the letter, S, until you land on , Sounds, and press enter.
4. Press, control + tab, until you land on, Sounds, now tab to or 3 times to the Program Events, list and down arrow to find the email option.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
I believe that everything happens for a reason. Usually, the reason is that somebody screwed up.

----- Original Message -----
From: Smiling?
Sent: Saturday, August 24, 2019 7:03 AM
Subject: Re: [TechTalk] sounds

Well just try and listen to what it is that you are reading a little more because more than one option was given. Hopefully below I’ve made this clearer this time around.

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds which will be in Control Panel, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. Now you will be in the Playback Tab, just Control Tab twice until you get to the Sounds Tab or Shift Tab once and you will hear Playback Tab where you would now arrow twice to the Sounds Tab.

4. On the Sounds tab, under Program Events, under Windows, click New Mail Notification.

5. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

6. Click OK.

7. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Friday, August 23, 2019 7:41 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Thanks

That is how I use to have it by going to my system tray and doing what you said

I can’t find that option anymore

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

 

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling?
Sent: Friday, August 23, 2019 2:58 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] sounds

 

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. On the Sound dialog box, on the Sounds tab, under Program Events, under Windows, click New Mail Notification.

4. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

5. Click OK.

6. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Thursday, August 22, 2019 1:32 PM
To: Tech Talk List
Subject: [TechTalk] sounds

 

                Hello

Using Windows 10(1903,  Jaws 2019 and office/outlook 2016, where can I find  to change the sound on my e mail?

I want to hange the current sound or chime my pc makes when I receive a new message

Before today it was easily found in my sounds/volume

I currently have this in my system tray but when I go to open it to “sounds” I can’t find where to change it.

Thanks

sugar

"I seldom think about my limitations, and they never make me sad. Perhaps there is just a touch of yearning at times; but it is vague, like a breeze among flowers."

Hellen Keller

😉

Sugar

https://www.gofundme.com/sugars-transplant-journey

 


Re: Checking An iTunes Account

joseph hudson <jhud7789@...>
 

Hello, to look at items that have been purchased, go to the app store, Cook on updates, click on your account, then you will find the purchased area, and every amp that you have ever downloaded will show up in that area. If you're looking for something else please let me know.

On Aug 23, 2019, at 4:38 PM, lynn white <lynnwhite360@gmail.com> wrote:

Using the iPhone, how can you check your iTunes account such as purchases, etc Thanks.





boom boxes

heather albright
 

Hay, mom has some old cassette tapes and she still use cds. So is there a simple boombox for her to use! Anyone heard of one lately! She is low tec! Cheers Heather

 

"Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
e-mail:
kd5cbl@...
sites:
National Federation of The Blind:
www.nfb.org
An Accessible Online Library:
www.bookshare.org

 


Re: Request: Recommendations For Good High Capacity Router

Ron Canazzi
 

Hi DJ,

Sorry for the multiple posts, but here's another question. I see that Netgear has routers with both 2 and 3 bands.  The model you referenced has 2 bands.  something called the AC2200 has 3 bands.  What is the advantage of the 3 over the 2 if any?  Will older devices work with the 3 band versions?  The 3 band versions seem to be somewhat more expensive.

Again, any help will be greatly appreciated.


On 8/24/2019 10:50 AM, DJ wrote:
We have the RBR-50 with multiple satellites model RBS-50. The entire system operates as one single wifi network so you do not have to worry about multiple network names and passwords. 
 

On Sat, Aug 24, 2019 at 10:36 AM David L Minton, Jr <djdavesdeli@...> wrote:
Good morning, would you be able to give the model number of your router? Because we are having issues with our spectrum router. And are looking to purchase one of our own.


On Aug 24, 2019, at 9:12 AM, DJ <grouloc@...> wrote:

I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:
Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"





-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: Request: Recommendations For Good High Capacity Router

Ron Canazzi
 

Hi DJ,

I did a search on the Netgear ORBI series and I see a bunch of them.  I have a relatively small house, so explain this satellite issue to me.  I take it that it has something to do with the WI-FI coverage.  Where would you position the various parts and how do you configure them to work together?

I see that the price rises for each model with the addition of every satellite--an obvious fact.

On 8/24/2019 10:50 AM, DJ wrote:
We have the RBR-50 with multiple satellites model RBS-50. The entire system operates as one single wifi network so you do not have to worry about multiple network names and passwords. 
 

On Sat, Aug 24, 2019 at 10:36 AM David L Minton, Jr <djdavesdeli@...> wrote:
Good morning, would you be able to give the model number of your router? Because we are having issues with our spectrum router. And are looking to purchase one of our own.


On Aug 24, 2019, at 9:12 AM, DJ <grouloc@...> wrote:

I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:
Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"





-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: Request: Recommendations For Good High Capacity Router

Ron Canazzi
 

Hi DJ,

From your message, I take it that you can set up this router system using an accessible  iPhone app?


On 8/24/2019 9:12 AM, DJ wrote:
I have the Netgear Orbi wifi system for my household which currently is running 23 wireless and 5 wired devices. Multiple simultaneous video streams and plenty of online gameplay occurs without a hiccup. WiFi is strong and and solid  and yes the system is very accessible. Netgear developers even worked with me to make a part of the Orbi app accessible. Now it is possible to manage individual devices on the network using VoiceOver. The system is costly but well worth it in my opinion. I will never go back to a standard router.    

On Sat, Aug 24, 2019 at 8:01 AM Ron Canazzi <aa2vm@...> wrote:
Hi Group,

I think my current D-link router is n the way out.  I now have 8 total
devices: 3 wired and 5 wireless devices which need access to it.

Can anyone recommend a high capacity and accessible router that will
have more durability than the standard 50 dollar wonder available at
local computer stores or on Amazon?

Keep in mind that I will have to do the set up myself, so accessibility
of whatever interface--usually browser based--is an essential requirement.

Thanks in advance for any help.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"





-- 
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


simple video editing

George McCoy <slr1bpz@...>
 

I think this topic was discussed on here some months ago, but I can't seem to find it in the list archive.  I need to mark sections of a long video, copy them to the clipboard and paste them into separate files.

I tried avidemux, but couldn't find a way to move through the long video with the keyboard.

Any suggestions would be greatly appreciated.


Thanks very much,

George

On 8/23/2019 4:57 AM, Smiling? wrote:

Changing the sounds.

 

1. Exit your email program.

2. Press the Windows key and type sounds, or you can go to your system tray (Insert+F11), and select what will be titled whatever your soundcard is with a percentage of what it's currently set at, press enter and either press S for sounds or arrow to it pressing enter.

3. On the Sound dialog box, on the Sounds tab, under Program Events, under Windows, click New Mail Notification.

4. Click Browse, and then select a different audio file.

Note:  Only .wav audio files are supported. Other audio file formats such as .mp3 or .aac can’t be used. Your favorite sound editing program might be able

to convert other audio file formats to a .wav file.

5. Click OK.

6. Restart your email program.

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sugar Lopez
Sent: Thursday, August 22, 2019 1:32 PM
To: Tech Talk List
Subject: [TechTalk] sounds

 

                Hello

Using Windows 10(1903,  Jaws 2019 and office/outlook 2016, where can I find  to change the sound on my e mail?

I want to hange the current sound or chime my pc makes when I receive a new message

Before today it was easily found in my sounds/volume

I currently have this in my system tray but when I go to open it to “sounds” I can’t find where to change it.

Thanks

sugar

"I seldom think about my limitations, and they never make me sad. Perhaps there is just a touch of yearning at times; but it is vague, like a breeze among flowers."

Hellen Keller

😉

Sugar

https://www.gofundme.com/sugars-transplant-journey

 

21241 - 21260 of 103864