Date   

a sendspace question

Nancy Hill
 

Hi Group,


I am using win10, SendSpace 16+ and at least jfw 18.

I am having a situation with SS that I don't remember having before.  In the following example  please see what is happening.


I have downloaded 3 files using SS.  I want to DL a 4th.  When I enter on the 4th link, files 1-3 start downloading again.


Is there somewhere within SS where I can go and delete files 1-3 so they won't keep trying to download?  I have already downloaded 1-3, unzipped them and filed them away so they should no longer be active on SS.


Thoughts and ideas on how to fix this problem. will be greatly appreciated.


Many thanks in advance


Nancy


Looking for a fan speed control program

Rick Alfaro
 

As the subject says, I'm searching for a program that will allow me to control the fan speed of my CPU. I've already tried one called SpeedFan which most seem to recommend on various hardware forums but I find it to be mostly inaccessible due to many of the readings the program has access to seem to be graphical.


For reference, my motherboard is an Asus z390 with an Intel I7-9700K cpu.


Dear Ella Yu and John, Thank you so much for your response!

Alan
 

Dear Ella Yu and John, Thank you so much for your response! With best regards,
God Bless.
Alan
Plantation, Sunny South Florida


Re: Just Testing, is the List down? Thanks

John Dennett
 

Yes we are here

John Sent from my iPhone

On Oct 27, 2019, at 9:20 PM, Alan <adicey415@gmail.com> wrote:

Just Testing, is the List down? Thanks
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida



Just Testing, is the List down? Thanks

Alan
 

Just Testing, is the List down? Thanks
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida


Re: Hot Key for command prompt at current folder

Marten Post Uiterweer
 

An other solution is:
press shift-contextkey or shift-f10 and arrow to: open with powershell.
This is not really a cmd window, but most you can do in command prompt
is also doable here.

Regards, Marten

On Fri, 25 Oct 2019 23:20:11 -0400 "Blaster" <blaster.nil8@gmail.com> wrote:

You can try doing this:

Using your example, navigate to the folder using the file explorer.
Once your there,
Press the ALT key and tap the letter D key to jump up to the address
bar. Pressing any key will delete the path that's highlighted, just
type cmd and press the enter key to open a command prompt at that
location.

To go the other way, that is to say to jump from a command prompt to a
file explorer window in that location, type this command at the
prompt:
start .
which is the word start, a space, a period and then press the enter key.
This will open a file explorer window at that location.

It's 2019 and the command prompt isn't dead yet!

HTH,
Blaster


On 10/25/19, Gene <gsasner@gmail.com> wrote:
I am not aware of such a command, you are working with a DOS prompt. But
there is an easy way to get to the folder, as I recall. I can't tell you
exactly how to do this because I don't have Windows 10. But when you are
using file explorer, there should be a way to open the folder and then copy
and paste the address to the clipboard. Then you can open the DOS prompt,
type cd and then space and paste the address into the command line.

I can't check that in Windows 10 and I'm not sure if it will require you to
add anything manually to the address, but it will give people something to
experiment with.

Gene
----- Original Message -----


From: Steven Johnson
Sent: Friday, October 25, 2019 2:06 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Hot Key for command prompt at current folder


Good day everyone. Is there a way in Windows 10 to get command prompt to
open at the current folder. For example, I would like to navigate to a
folder called OTR\Radio Mystery Theater\Season 3, and then open command
prompt and land in the folder c:\otr\radio mystery theater\season 3?





Re: Dear Friends, Need help with sounds, got New Headphones, and not the same strength on both sides!

Mike B <mb69mach1@...>
 

Yo dog,
 
If this is a USB headset and you're currently using it, try the following.  Note;  your computer will see a USB headset as another soundcard, so this is normal.  Also, I don't have a USB headset handy, so the steps below are the best I can do.  If you can't get this figured out call me in the morning around 1:00 pm your time.
1. If you have the Speakers icon in the system tray press, Insert + F11, to open the system tray.
2. Find the Speakers icon and press enter, then find and press enter on Playback devices.
3. Up and down arrow to find / select the Sony entry, but don't press enter.
4. Tab to the, properties button, and press enter or spacebar.
5. Now go through the tabs and you'll probably want the Levels tab, and tab through to see / change your balance settings.

Take care.  Mike.  Sent from my iBarstool.  Go Rams!
Every man should marry.  After all, happiness is not the only thing in life.

----- Original Message -----
From: Alan
Sent: Friday, October 25, 2019 5:06 PM
Subject: [TechTalk] Dear Friends, Need help with sounds, got New Headphones, and not the same strength on both sides!

Dear Friends,
Can some one please help me, I just purchased a new Sony Headphone set, and
it does not sound like my Old Sony Headphones.
My last set of Sony lasted over 2 years, but it could not contain any more
PVC tape, it had been dropped and sat on, just too, too many times!
Whoa!
I am using a USB Microphone, and that is not an issue, just the headphones.
It seems music is much, much louder on one side than the other, it is there,
but since it is a Stereo  headphone, it needs to be equal in strength, and
for some reason this new headphone set does not do that.
I looked and felt the new headphones  to see if there was a way to adjust
the headphones, but nothing there.
I guess I need to go into my Windows 7 settings into the Sound section and
make some adjustments.
Will some one please give me step by step instructions how to do that , make
the left side of the Stereo sound the same strength as the right side?
I would very much appreciate it.
Thanking you in advance.
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida




Re: Hot Key for command prompt at current folder

Steven Johnson <saxmonger@...>
 

Thank you Blaster. That's exactly what I needed. Doesn't get much easier than that.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Blaster
Sent: Friday, October 25, 2019 8:20 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Hot Key for command prompt at current folder

You can try doing this:

Using your example, navigate to the folder using the file explorer.
Once your there,
Press the ALT key and tap the letter D key to jump up to the address bar. Pressing any key will delete the path that's highlighted, just type cmd and press the enter key to open a command prompt at that location.

To go the other way, that is to say to jump from a command prompt to a file explorer window in that location, type this command at the
prompt:
start .
which is the word start, a space, a period and then press the enter key.
This will open a file explorer window at that location.

It's 2019 and the command prompt isn't dead yet!

HTH,
Blaster


On 10/25/19, Gene <gsasner@gmail.com> wrote:
I am not aware of such a command, you are working with a DOS prompt.
But there is an easy way to get to the folder, as I recall. I can't
tell you exactly how to do this because I don't have Windows 10. But
when you are using file explorer, there should be a way to open the
folder and then copy and paste the address to the clipboard. Then you
can open the DOS prompt, type cd and then space and paste the address into the command line.

I can't check that in Windows 10 and I'm not sure if it will require
you to add anything manually to the address, but it will give people
something to experiment with.

Gene
----- Original Message -----


From: Steven Johnson
Sent: Friday, October 25, 2019 2:06 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Hot Key for command prompt at current folder


Good day everyone. Is there a way in Windows 10 to get command prompt
to open at the current folder. For example, I would like to navigate
to a folder called OTR\Radio Mystery Theater\Season 3, and then open
command prompt and land in the folder c:\otr\radio mystery theater\season 3?





Re: Hot Key for command prompt at current folder

Blaster
 

You can try doing this:

Using your example, navigate to the folder using the file explorer.
Once your there,
Press the ALT key and tap the letter D key to jump up to the address
bar. Pressing any key will delete the path that's highlighted, just
type cmd and press the enter key to open a command prompt at that
location.

To go the other way, that is to say to jump from a command prompt to a
file explorer window in that location, type this command at the
prompt:
start .
which is the word start, a space, a period and then press the enter key.
This will open a file explorer window at that location.

It's 2019 and the command prompt isn't dead yet!

HTH,
Blaster

On 10/25/19, Gene <gsasner@gmail.com> wrote:
I am not aware of such a command, you are working with a DOS prompt. But
there is an easy way to get to the folder, as I recall. I can't tell you
exactly how to do this because I don't have Windows 10. But when you are
using file explorer, there should be a way to open the folder and then copy
and paste the address to the clipboard. Then you can open the DOS prompt,
type cd and then space and paste the address into the command line.

I can't check that in Windows 10 and I'm not sure if it will require you to
add anything manually to the address, but it will give people something to
experiment with.

Gene
----- Original Message -----


From: Steven Johnson
Sent: Friday, October 25, 2019 2:06 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Hot Key for command prompt at current folder


Good day everyone. Is there a way in Windows 10 to get command prompt to
open at the current folder. For example, I would like to navigate to a
folder called OTR\Radio Mystery Theater\Season 3, and then open command
prompt and land in the folder c:\otr\radio mystery theater\season 3?





Re: Dear Gene, You were absolutely 100 percent correct with the result of a "Disk CleanUp" on an external T - Drive

Gene
 

Fragmentation isn't related to disk cleanup.  Are you saying you ran defrag?  Defrag won't give you more disk space.  The purpose is to bring parts of files together that may be scattered over a disk together and thus speed performance.  Disk Cleanup removes unnecessary files.
 
Thanks for confirming what I thought about running disk cleanup on a drive that doesn't contain the operating system or programs.
 
Gene

----- Original Message -----
From: Alan
Sent: Friday, October 25, 2019 7:17 PM
Subject: [TechTalk] Dear Gene, You were absolutely 100 percent correct with the result of a "Disk CleanUp" on an external T - Drive

Dear Gene, You were absolutely 100 percent correct with your thoughts about
the result of a "Disk cleanup" on an external T - Drive!
I acquired exactly 0 extra storage space, even though I had been using this
Segate single Terabyte Drive for 7 or 8 years, and I put and took stuff
off and on for that many years!
I was sure some files would or should have been fragmented, but Nope!
Nothing, and I ran the "Disk Cleanup" twice and got the same results!  "0"!

Thanks Gene.
 With best regards.
God Bless.
Alan
Plantation, Sunny South Florida
----- Original Message -----
From: Gene
To: main@TechTalk.groups.io
Sent: Wednesday, October 23, 2019 1:18 AM
Subject: Re: [TechTalk] Dear Friends, Should I do a "Disk Clean Up" on my 8,
9, year old External T - Drives?


In general, except for one possible case, I doubt that doing a cleanup would
accomplish anything. the purpose is to remove files that accumulate that
don't do anything but waste space.  The operating system isn't on the
external disks and you aren't running files on them.  You should have either
no or almost no useless files if you just use it for storage.  One thing I
don't know about is something like System Restore keeping a record of what
is on your drive.  I see no point in that, and, if it is monitoring your
drive, you might save room, I'm not sure how much, by stopping monitoring.
If the old file is left, that keeps information about the drive, you might
save room, but I don't know how much, if you remove the file.

But others who know more may comment on that.

Gene
----- Original Message -----

From: Alan
Sent: Tuesday, October 22, 2019 11:47 PM
To: Tech Talk Groups
Subject: [TechTalk] Dear Friends, Should I do a "Disk Clean Up" on my 8, 9,
year old External T - Drives?


Dear Friends,
In organizing the Music files, audio books and DVS Movie files I collected
over the past 7, 8, 9 years,  I realized I never did a "Disk Cleanup", on
these External single Terabyte Seagate Drives I have.
Should I do a "Disk Clean Up" on my 8, 9,  year old T - Drives?
They were almost full, so I copied 100 GB from Each to a 4 - Terabyte
External Drive
What should I expect to happen, How long would it take, Will it give me a
little more room, is a "Disk Clean up like a Defrag, will my T - Drives run
faster? is there anything I should be leery of ?
Thanking you in advance for your advice and assistance,
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida




 




Re: Hot Key for command prompt at current folder

Gene
 

I am not aware of such a command, you are working with a DOS prompt.  But there is an easy way to get to the folder, as I recall.  I can't tell you exactly how to do this because I don't have Windows 10.  But when you are using file explorer, there should be a way to open the folder and then copy and paste the address to the clipboard. Then you can open the DOS prompt, type cd and then space and paste the address into the command line. 
 
I can't check that in Windows 10 and I'm not sure if it will require you to add anything manually to the address, but it will give people something to experiment with.
 
Gene
----- Original Message -----

Sent: Friday, October 25, 2019 2:06 PM
Subject: [TechTalk] Hot Key for command prompt at current folder

Good day everyone.  Is there a way in Windows 10 to get command prompt to open at the current folder.  For example, I would like to navigate to a folder called OTR\Radio Mystery Theater\Season 3, and then open command prompt and land in the folder c:\otr\radio mystery theater\season 3?


Dear Gene, You were absolutely 100 percent correct with the result of a "Disk CleanUp" on an external T - Drive

Alan
 

Dear Gene, You were absolutely 100 percent correct with your thoughts about the result of a "Disk cleanup" on an external T - Drive!
I acquired exactly 0 extra storage space, even though I had been using this Segate single Terabyte Drive for 7 or 8 years, and I put and took stuff off and on for that many years!
I was sure some files would or should have been fragmented, but Nope! Nothing, and I ran the "Disk Cleanup" twice and got the same results! "0"!

Thanks Gene.
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida

----- Original Message -----
From: Gene
To: main@TechTalk.groups.io
Sent: Wednesday, October 23, 2019 1:18 AM
Subject: Re: [TechTalk] Dear Friends, Should I do a "Disk Clean Up" on my 8, 9, year old External T - Drives?


In general, except for one possible case, I doubt that doing a cleanup would accomplish anything. the purpose is to remove files that accumulate that don't do anything but waste space. The operating system isn't on the external disks and you aren't running files on them. You should have either no or almost no useless files if you just use it for storage. One thing I don't know about is something like System Restore keeping a record of what is on your drive. I see no point in that, and, if it is monitoring your drive, you might save room, I'm not sure how much, by stopping monitoring. If the old file is left, that keeps information about the drive, you might save room, but I don't know how much, if you remove the file.

But others who know more may comment on that.

Gene
----- Original Message -----

From: Alan
Sent: Tuesday, October 22, 2019 11:47 PM
To: Tech Talk Groups
Subject: [TechTalk] Dear Friends, Should I do a "Disk Clean Up" on my 8, 9, year old External T - Drives?


Dear Friends,
In organizing the Music files, audio books and DVS Movie files I collected
over the past 7, 8, 9 years, I realized I never did a "Disk Cleanup", on
these External single Terabyte Seagate Drives I have.
Should I do a "Disk Clean Up" on my 8, 9, year old T - Drives?
They were almost full, so I copied 100 GB from Each to a 4 - Terabyte
External Drive
What should I expect to happen, How long would it take, Will it give me a
little more room, is a "Disk Clean up like a Defrag, will my T - Drives run
faster? is there anything I should be leery of ?
Thanking you in advance for your advice and assistance,
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida


Dear Friends, Need help with sounds, got New Headphones, and not the same strength on both sides!

Alan
 

Dear Friends,
Can some one please help me, I just purchased a new Sony Headphone set, and it does not sound like my Old Sony Headphones.
My last set of Sony lasted over 2 years, but it could not contain any more PVC tape, it had been dropped and sat on, just too, too many times!
Whoa!
I am using a USB Microphone, and that is not an issue, just the headphones.
It seems music is much, much louder on one side than the other, it is there, but since it is a Stereo headphone, it needs to be equal in strength, and for some reason this new headphone set does not do that.
I looked and felt the new headphones to see if there was a way to adjust the headphones, but nothing there.
I guess I need to go into my Windows 7 settings into the Sound section and make some adjustments.
Will some one please give me step by step instructions how to do that , make the left side of the Stereo sound the same strength as the right side?
I would very much appreciate it.
Thanking you in advance.
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida


Re: Virtual Recorder question

Norma A. Boge
 

I figured it out since I posted the message. Thanks anyway. .

 

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, October 24, 2019 11:40 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Virtual Recorder question

 

Record what, an Internet stream, something using a microphone or recording from something like a turntable?  Are you saying you don’t want JAWS to be heard in the recording and you want to do other things while recording?  We need details.  Also, what source setting are you using now for recording?  Are you using the what you hear setting?

 

Gene

-----  Original Message -----

Sent: Thursday, October 24, 2019 10:53 AM

Subject: [TechTalk] Virtual Recorder question

 

I'd like to make a recording with Virtual Recorder in the background. I want to be recording and still use Jaws to work at the same time. Is this possible in VR and if so please post directions. Thanks, Norma




Creating A signature line

Sugar
 

Hello friends,

A friend of mine needs to figure out how to create a signature line using:

lap Top.

Windows 10

NVDA.

Outlook

 

Thanks

sugar


Hot Key for command prompt at current folder

Steven Johnson <saxmonger@...>
 

Good day everyone.  Is there a way in Windows 10 to get command prompt to open at the current folder.  For example, I would like to navigate to a folder called OTR\Radio Mystery Theater\Season 3, and then open command prompt and land in the folder c:\otr\radio mystery theater\season 3?


"Question about screen size of Apple Watch 5

Sharon Hooley
 

Hi,

I'm looking into getting the 5th addition of Apple Watch. The smaller screen is a little less than the larger one. Does it matter what size it is when it comes to accessibility and features?

Thanks,


Is it hard to communicate, even with hearing aids? Visit
www.CochlearAmericas.com


annoying notifications now with Edge Dev

Loy <loyrg2845@...>
 

I am now trying Edge Dev and I am getting annoying notifications and can't find a setting to turn off these notifications. Any one know how ?


Re: Virtual Recorder question

Smiling?
 

VirtualRecorder
1. Open up Virtual Recorder and from the Virtual Recorder window.
2. Tab to Recording Source which will be around 5 tabs or so.
3. Adjust this to whatever it is (which is most likely Virtual Capture Device type what you hear) that you are interested in capturing which it sounds to me you are wanting to record yourself while just using the computer which will also record your screen reader. You would adjust this to Virtual Capture Device type what you hear as mentioned above and it will successfully do what you are after it doing.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Norma A. Boge
Sent: Thursday, October 24, 2019 8:53 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Virtual Recorder question

I'd like to make a recording with Virtual Recorder in the background. I want to be recording and still use Jaws to work at the same time. Is this possible in VR and if so please post directions. Thanks, Norma


Trouble with Apex

jan howells <gale7978@...>
 

I have 2 g-mail accounts. I am able to access them boy on the iPad Mini 4, but I cannot access one of them on the Apex. What could be the problem? Thank you.

Jan Howells

19881 - 19900 of 103884