|
Buzz Using 3.5 mm Patch Cord
Rich DeSteno
I have used 3.5 mm patch cords for many years to record from radios and other electronic devices. Today I wanted to set up to record from my TV cable box audio output jack, which is a 3.5 mm jack. I tried a couple of my cords, but they all had a buzz or hum in the left channel. I do not get that noise when recording off of radios or other devices. As a test, I plugged in the Apple Earbuds that came with my iPhone, and was surprised to hear clear stereo with no hum or buzz. Is there a special type of patch cord that I need for these cable boxes in order to get the clear stereo?
-- Rich De Steno
|
|
|
|
Re: Pontes Media Downloader
Gene
Here is how you adjust the bit rate.
New major steps start on new lines.
Open the menus with alt.
Right or left arrow until you get to options.
Down arrow until you get to program options. You may not hear speech
the first one or two times you down arrow.
Control tab to get to the media conversions part of the dialog.
Tab until you get to the settings for a kind of file. For example,
you might hear wave settings. Again, you may not hear speech the first
time you tab.
Once there, up and down arrow until you get to MP3. Tab through and
work with the items in the dialog you want to change. Ask if you have
problems.
Gene
----- Original Message -----
From: Gene via Groups.Io
Sent: Saturday, November 09, 2019 9:24 PM
Subject: Re: [TechTalk] Pontes Media Downloader As I said, using 2.x, I convert to wave and then I use Switch to create an
MP3 file.
You can control the bit rate in 3.1. I’ll have to look at the program
to see how.
Gene
----- Original Message -----
Gene, Which of the versions offers the better / higher sound quality, 2.0 or 3.0? For some reason I can't seem to get better than 128 using 3.0. Thanks. DJ
On 11/9/2019 1:35 PM, Gene wrote:
|
|
|
|
Re: Happy Birthday Carlos!
Janet
Hi Mike and All, I’m sorry I couldn’t join all you in Carlos’s birthday, but I did celebrated though! Carlos’s birthday is the same day as my father’s is. When my family and I were out at my father’s grave site putting flowers on his grave, I bought a little blue flower for Carlos as well. I included a Prayer for Carlos, and I through the blue flower up in the sky, and said this is for you Carlos, and I thought I was going to fall over when the Blue flower landed right on my father’s grave site, so I left it there! I also had a small blue ribbon attached on the Blue flower, in which the ribbon said Happy Birthday Carlos Nazario .
God Bless You my friend! May you Rest in Peace! Your forever friend, who still misses you! Janet
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io]
On Behalf Of Mike B
Sent: Wednesday, November 06, 2019 12:29 PM To: TechTalk Subject: [TechTalk] Happy Birthday Carlos!
Hey y'all,
Today would have been Carlos's 48th birthday. Send him birthday wishes at:
It won't leave your computer, but he'll be sure to get it! Happy Birthday Bro!
|
|
|
|
Re: Pontes Media Downloader
Gene
As I said, using 2.x, I convert to wave and then I use Switch to create an
MP3 file.
You can control the bit rate in 3.1. I’ll have to look at the program
to see how.
Gene
----- Original Message -----
Gene, Which of the versions offers the better / higher sound quality, 2.0 or 3.0? For some reason I can't seem to get better than 128 using 3.0. Thanks. DJ
On 11/9/2019 1:35 PM, Gene wrote:
|
|
|
|
Re: Linking An Echo Device With A Bose Radio
jan howells <gale7978@...>
I have the Wave Music System 4. I think that is there most recent update to the boombox. I am not sure if I am correct. I have an aux jack, a headphone jack, and I believe that I have a few more, I am not suffe. I will have to check. My caregivers are foreign, and they are not that tech savvy. I may have to call BOSE to ask whether that system has the RCA jacks. It may. Thank you.
Jan Howells
|
|
|
|
Re: Pontes Media Downloader
DJ
Gene, Which of the versions offers the better / higher sound quality, 2.0 or 3.0? For some reason I can't seem to get better than 128 using 3.0. Thanks. DJ
On 11/9/2019 1:35 PM, Gene wrote:
|
|
|
|
Re: Linking An Echo Device With A Bose Radio
Mike B <mb69mach1@...>
toggle quoted messageShow quoted text
Hi Patrick,
We have a boom box as well, so I'll play around
with an audio cable or RCA cable to see if I can connect the way I
connected to the table top radio. Thanks much.
Take care. Mike. Go Dodgers! Sent from my iBarstool. Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
----- Original Message -----
From: Patrick Ford
Sent: Saturday, November 09, 2019 11:51 AM
Subject: Re: [TechTalk] Linking An Echo Device With A Bose
Radio Bose used to manufacture a device called Bluetooth audio adapter. I don’t know if they still have this item. I have one from about 5 years ago. It hooks up to the RCA jacks of the Bose – I use it with the larger boombox type radio/cd player. I don’t recall if the table top model has RCA jacks. But, it is called the Bluetooth audio adapter. Check the bose site to see if they still carry it. I believe it was around 50 dollars. Patrick
Sent from Mail for Windows 10
From:
Mike B
Hi All,
We have an Echo Dot 3rd
generation that we would like to link to a Bose table top AM / FM / DVD radio so
we could listen to music through the radio instead of the Echo Dot. I
thought I had heard that Bose makes some sort of blue tooth device that will do
this. If anyone knows if this is accurate and can fill me in on how this
works or has done this I would appreciate it greatly. Thanks much.
|
|
|
|
Re: Linking An Echo Device With A Bose Radio
Mike B <mb69mach1@...>
Hi Jan,
Hot damn, worked like a charm! LOL It took a
little experimentation, but gotter done. Thanks much.
Take care. Mike. Go Dodgers! Sent from my iBarstool. Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
----- Original Message -----
Sent: Saturday, November 09, 2019 11:41 AM
Subject: Re: [TechTalk] Linking An Echo Device With A Bose
Radio I use an audio cable. I connect one end to the aux jack on the BOSE, and the other end to the jack on the Dot. Then I put the BOSE on Aux. Then I tell Alexa to play whatever I want. BOSE is the best! Jan Howells
|
|
|
|
Re: Pontes Media Downloader
Kerryn Gunness <k_gunness@...>
your welcome george
toggle quoted messageShow quoted text
----- Original Message -----
From: "George McCoy" <slr1bpz@gmail.com> To: <main@TechTalk.groups.io> Sent: Saturday, November 9, 2019 5:59 PM Subject: Re: [TechTalk] Pontes Media Downloader Thanks Gene and Kerryn. I'll give it a go.
|
|
|
|
Re: Pontes Media Downloader
Kerryn Gunness <k_gunness@...>
true victor
toggle quoted messageShow quoted text
----- Original Message -----
From: "Victor" <victorelawrence@gmail.com> To: <main@techtalk.groups.io> Sent: Saturday, November 9, 2019 5:36 PM Subject: Re: [TechTalk] Pontes Media Downloader Hello: This is a great application and it???s very easy to use. I like it a lot. Victor On Nov 9, 2019, at 1:21 PM, Kerryn Gunness via Groups.Io <k_gunness=yahoo.ca@groups.io> wrote:
|
|
|
|
Re: Pontes Media Downloader
George McCoy
Thanks Gene and Kerryn. I'll give it a go.
toggle quoted messageShow quoted text
George
On 11/9/2019 3:21 PM, Kerryn Gunness via Groups.Io wrote:
hi george
|
|
|
|
Re: Pontes Media Downloader
Victor
Hello:
toggle quoted messageShow quoted text
This is a great application and it’s very easy to use. I like it a lot. Victor
On Nov 9, 2019, at 1:21 PM, Kerryn Gunness via Groups.Io <k_gunness=yahoo.ca@groups.io> wrote:
|
|
|
|
Re: Pontes Media Downloader
Kerryn Gunness <k_gunness@...>
hi george
toggle quoted messageShow quoted text
below is the download link for pmd 3 Pontes Media Downloader - Download and convert videos from YouTube and other similar websites http://www.pontes.ro/en/scripts/#pmd kerryn
----- Original Message -----
From: "George McCoy" <slr1bpz@gmail.com> To: <main@TechTalk.groups.io> Sent: Saturday, November 9, 2019 1:17 PM Subject: [TechTalk] Pontes Media Downloader Is 2.0 the latest version? I recall reading somewhere that there was version 3.0 but I can't seem to find it.
|
|
|
|
Re: Linking An Echo Device With A Bose Radio
Patrick Ford
Bose used to manufacture a device called Bluetooth audio adapter. I don’t know if they still have this item. I have one from about 5 years ago. It hooks up to the RCA jacks of the Bose – I use it with the larger boombox type radio/cd player. I don’t recall if the table top model has RCA jacks. But, it is called the Bluetooth audio adapter. Check the bose site to see if they still carry it. I believe it was around 50 dollars. Patrick
Sent from Mail for Windows 10
From: Mike B
Sent: Saturday, November 9, 2019 2:47 PM To: TechTalk Subject: [TechTalk] Linking An Echo Device With A Bose Radio
Hi All,
We have an Echo Dot 3rd generation that we would like to link to a Bose table top AM / FM / DVD radio so we could listen to music through the radio instead of the Echo Dot. I thought I had heard that Bose makes some sort of blue tooth device that will do this. If anyone knows if this is accurate and can fill me in on how this works or has done this I would appreciate it greatly. Thanks much.
|
|
|
|
Re: Linking An Echo Device With A Bose Radio
jan howells <gale7978@...>
Hi Mike,
I use an audio cable. I connect one end to the aux jack on the BOSE, and the other end to the jack on the Dot. Then I put the BOSE on Aux. Then I tell Alexa to play whatever I want. BOSE is the best! Jan Howells
|
|
|
|
Linking An Echo Device With A Bose Radio
Mike B <mb69mach1@...>
Hi All,
We have an Echo Dot 3rd generation that we would like to
link to a Bose table top AM / FM / DVD radio so we could listen to music through
the radio instead of the Echo Dot. I thought I had heard that Bose makes
some sort of blue tooth device that will do this. If anyone knows if this
is accurate and can fill me in on how this works or has done this I would
appreciate it greatly. Thanks much. Take care. Mike. Go Dodgers! Sent from my iBarstool. Arguing with a woman is like reading a software license agreement. In the end you have to ignore everything, & click I agree.
|
|
|
|
Re: Pontes Media Downloader
Gene
There is a version 3.1. I like version 2.x
better. It doesn't allow you to adjust MP3 conversion settings, and the
presets are far too low for someone who wants good quality files. the
preset is about 128KBPS. That's fine for people listening on small
speakers or small portable headphones, but not for those listening on good
equipment who want good sound.
But its easier to follow what the program is doing
during a download. You can just read the title bar to find out.
I solve the MP3 problem by having material
converted to wave, then using Switch to convert wave to MP3 with the high
quality bit rate I want.
Gene
----- Original Message -----
From: George McCoy
Sent: Saturday, November 09, 2019 11:17 AM
Subject: [TechTalk] Pontes Media Downloader version 3.0 but I can't seem to find it. Thanks, George
|
|
|
|
How do I remove a song from my iPhone with iTunes?
Peter Spitz
Using iTunes, I can access the list of songs on my iPhone but if I try
the delete button, nothing happens. I have a lot of songs that I want to remove. Any help is greatly appreciated in advance. I do have the latest version of iTunes and the latest update to my iPhone 6S. Thanks, Peter
|
|
|
|
Pontes Media Downloader
George McCoy
Is 2.0 the latest version? I recall reading somewhere that there was version 3.0 but I can't seem to find it.
Thanks, George
|
|
|
|
Re: How do I get Jaws to number emails in Outlook using Jaws
Carolyn Arnold
Interesting that MS calls theirs disability, while Apple calls theirs Accessibility.
toggle quoted messageShow quoted text
-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Saturday, November 9, 2019 6:07 AM To: main@TechTalk.groups.io Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws This is extremely wise advice. I won't go in to the negative tech support that I have received from the Ms Disability Desk. But, to be fair, at least MS has started trying to provide assistance for us. And, I have had some very good tech support from the Disability Desk. James B -----Original Message----- From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Smiling? Sent: Saturday, November 9, 2019 4:37 AM To: main@TechTalk.groups.io Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws If you end up calling Microsoft, maybe create yourself a Restore Point before (instructions below). Creating a System Restore Point in Windows10 (Run Dialogue steps as well). 1. Go back to System Properties (WindowsKey+PauseKey) and Shift Tab until you get to System Protection and press Enter. Or just hit your Windows key and type system restore and up will come Create a Restore Point, press Enter. 2. Tab down to Create... and press Enter. You are now going to name it if desired and tab through Okaying it for it to begin. It will create it letting you know when it’s done. Run Dialogue steps Windows+R to open up your Run Dialogue and type: rstrui.exe and press Enter. System Restore will open up. -----Original Message----- From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Carolyn Arnold Sent: Friday, November 8, 2019 5:00 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Thanks. With JAWS, that did not work. As it is, as I come to a folder it does tell me how many unread messages there. So, at night, when I delete Trash, I have no idea how many emails I got that day. It is beginning to look like the only alternative is calling Microsoft Disability. -----Original Message----- From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Gene Sent: Friday, November 8, 2019 3:23 PM To: main@TechTalk.groups.io Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws On another list, someone posted the following instructions for determining the number of messages in a folder. It won't tell you how many unread messages there are, but this may help until you find the way to see all the information you want. Maybe you won't want to spend time solving the problem when you can see how many messages there are. Another solution to the unread number of messages problem might be to use the below method and, before you close the program, select all the messages in your inbox and send them to another folder. I made one once called inbox backup, though I seldom use it. If you read all your mail, then send whatever you didn't delete to inbox backup, the next time you get mail, the number of messages you hear announced will be the number of unread messages so that solves that problem in a workaround. Here is the procedure. it is discussed in terms of what NVDA says but JAWS should say the same or about the same thing. Close all open emails and make sure that your cursor is resting on any closed message in the current folder. Press control+Shif+tab to opens the "Folder List". NVDA announces "Folder List minimised". Press space bar to expand the list. Arrow down to the folder you want. Note that NVDA speaks the number of messages contained in the folder after giving the folder name. You can also open the Folder List by using control+y but this view of the list does not show the number of emails contained in each folder. Gene ----- Original Message ----- From: Carolyn Arnold <mailto:4carolyna@windstream.net> Sent: Friday, November 08, 2019 1:45 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws All that gets me is with Insert+Page Down telling me the name of the email list. At least, Outlook is working otherwise. For a while there, I was just having all kind of problem with it. As much as I tend to resist it, probably the final solution will be calling Microsoft Disability. I had instructions from them that I posted, but they no longer work. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Friday, November 8, 2019 10:29 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Hi Carolyn Here are the Outlook 2016 key strokes to accomplish this task. Your Outlook 2013 might be slightly different. From outside of a message, type: alt+v and v again This should put you on a very long sentence that starts with the words: advanced view settings In Outlook 2016, I tab 3 times to description filter and hit enter. Then I have to tab around 10 times to a button that says clear all. And, then hitthe space bar on that button. Then tab to the OK button and hit enter. Then tab all the way around to make sure that there is not a second OK button that you need to hit. Then from outside of an email message, type insert+page down. Hopefully, you will hear the total number of emails in that folder. And also hear the number of unread emails. I hope that this is close enough to get the job done for you. And, MS Disability Desk is still an option. Good luck, James B From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of Carolyn Arnold Sent: Friday, November 8, 2019 8:45 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Even with Shift+Tab, in Advanced, when I go to it after highlighting Filger, the only options are Field, whatever that is, and Edit. I am sure that eventually, I will be driven to calling Microsoft Disability again. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of Smiling? Sent: Friday, November 8, 2019 4:43 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Try Shift+Tabbing instead when focused in the Advanced Tab, and on my end, there's only a Clear All button. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of Carolyn Arnold Sent: Thursday, November 7, 2019 8:09 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws My problem is that I can't get to Remove in the Advanced Tab. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Thursday, November 7, 2019 6:13 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Carolyn, I thank you too. I finally got it to work. My menus are just slightly different from yours. I still do not have Jaws telling me where I am in the ocean of emails but at least I can tell how big the ocean is and how many of the emails have not been read. I bet you was glad to get that fixed. Cheers, James B -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of chris judge Sent: Thursday, November 7, 2019 3:38 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Thanks Carolyn. This worked perfectly. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of Carolyn Arnold Sent: November 6, 2019 9:44 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws James, I doubled checked in my Outlook tutorial and found this: Settings for displaying number of mailbox messages 1. Get in mailbox you want to remove filters from and set numbers in. 2. Alt+v+v. 3. Tab three times to Filters. 4. Shift+Tab. 5. Right Arrow to Advanced Tab. 6. Tab to Remove. 7. Tab to OK. 8. Tab to OK again - VOILA, you're done. Trouble is, I have been trying that; I tried again. I am unable to make it work. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of Gene Sent: Wednesday, November 6, 2019 4:13 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws That sounds like a good idea. I haven’t used the disability service but the reports I’ve seen are uneven as to quality and my impression is that it ranges widely. Gene ----- Original Message ----- From: James Bentley <mailto:bentleyj1952@att.net> Sent: Wednesday, November 06, 2019 2:20 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Hi, I may have fixed my biggest problem with Outlook. All devices would hang several times per day forcing me to restart the device. That solution is available if someone else has the same problem. The MS Disability Desk is a lot of help most of the time. However, they have really messed up my PC a couple of times. I have started creating a backup image of my PC before I even call them. Also, I create an image if I am going to mess with anything that I have doubts about. For example, I accidentally locked myself out of one of my laptops while messing with pass words and user profiles. It only took an hour to replace the entire drive from an image that I had made a few hours before I started messing around. Cheers, James B -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of Carolyn Arnold Sent: Wednesday, November 6, 2019 1:14 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws James, if Microsoft hadn't fixed my Outlook (all but filters), I would have called a local computer guy, but am thankful not to have had to spend that money. Sometimes though, a knowledgeable sightie can work wonders in a little bit of time. My husband is good, but has no clue about Outlook or any other email client. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Wednesday, November 6, 2019 12:38 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws I might be stuck with Office 365. I'll reluctantly get over the numbering of emails if I must. Its just a massive learning curve. Plus, I have an unidentified problem. All 3 of my devices will hang. That is Outlook hangs. Then, I must do a forced shutdown and restart Outlook. This happens 2 or 3 times a day. disability tech support reinstalled my server settings on two machines with no success. They are now suggesting a repair on Outlook. I have put that on hold for a day or so. I am Googling around to learn more. There are plenty of people who have the same problem And, with many solutions that I want to investigate before I get stuck having to install an image backup because MS or I destroyed my current drive. I really want Office 365 to work. I am accustomed to some of its menus and keystrokes. it has a lot of very cool features. Its spell-checker and language checker are awesome. And, I am now liking Imap. but, still that learning curve. Cheers, James B -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of Carolyn Arnold Sent: Tuesday, November 5, 2019 3:52 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws I have JAWS 18, because it mostly works so well, I don't to try to fix something that is not broken. I have Outlook 2013. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Tuesday, November 5, 2019 4:32 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws I'm not getting the same results as you. Maybe we are using different versions of Outlook or our settings are different. Let me know if you discover how to make changes to the filters. James B -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> <main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > On Behalf Of Carolyn Arnold Sent: Tuesday, November 5, 2019 1:00 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Insert+Page Down used to tell me the number, which I gave that command on another list. However, if the filters are on, that command will provide no number information. I would love to know how to remove the filter. But, Insert+8 will sai a message and one out of seven or 22 out of 35, whatever is there. -----Original Message----- From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of Smiling? Sent: Tuesday, November 5, 2019 6:26 AM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: Re: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws As far as being announced 50 out of 100 not at all sure of how one would do that with JAWS. Hearing how many emails within whatever given folder, just try using the keystroke (while focus is within this folder) Insert+PageDown From: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> [mailto:main@TechTalk.groups.io] On Behalf Of James Bentley Sent: Monday, November 4, 2019 10:30 PM To: main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> Subject: [TechTalk] How do I get Jaws to number emails in Outlook using Jaws Hi all, I've been using Outlook with IMap for over a week now. I am grateful to all who talked me in to trying it again. 4 or 5 years ago, it didn't work for me. Now, I have a faster internet connection and faster computers and I am loving Outlook and imap. I still have one more item that I hope can be resolved. I want to know how many emails are in my In-box and where I am in the list. For example, if I have 100 emails in my In-Box and I am on email number 50, I would like Jaws to say 50 out of 100. I have the check box in folder properties checked that tells Outlook to number all mail. What else should I try? I am using Jaws 19, Office365 and Windows10. Thanks for any ideas, James B
|
|
|