Date   

chrome book and screen readers

Patrick Ford
 

Hi,

Is NVDA compatible with the chrome book?

Thanks.

Patrick

 

Sent from Mail for Windows 10

 


Re: cannot control mic volume

Smiling?
 

1. Open up your Run Dialogue by using the Windows key+R keystroke.
2. Type exactly (what is below) and press Enter
mmsys.cpl
3. This should honestly take you to your Playback Tab where your various
speakers are available.
4. So you will want to ControlTab once to the RecordingTab where you will
adjust your microphone accordingly and OK it when finished.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of
Joe Giovanelli
Sent: Sunday, January 12, 2020 6:51 AM
To: techtalk@groups.io
Subject: [TechTalk] cannot control mic volume

Good Morning,

I run Win 7 and System Access.

I sometimes need to adjust the mic volume. I open System Volume and tab to
the Mic volume. I set it to where I need it.

Unfortunately there is no Apply button or OK. This means that when I shut
down and restart my computer, the mic volume is what it had been before I
changed it in the previous session.

How can I keep this from happening?

Thank you very much.

Joe Giovanelli, W2PVY


cannot control mic volume

Joe Giovanelli
 

Good Morning,

I run Win 7 and System Access.

I sometimes need to adjust the mic volume. I open System Volume and tab to the Mic volume. I set it to where I need it.

Unfortunately there is no Apply button or OK. This means that when I shut down and restart my computer, the mic volume is what it had been before I changed it in the previous session.

How can I keep this from happening?

Thank you very much.

Joe Giovanelli, W2PVY


Re: A problem with an SD card in a VR Trek

Steven Johnson <saxmonger@...>
 

Yes, you can.  However, I haven’t seen XP in so long that I can’t remember how to get to the command prompt.  I seem to remember that it is located under accessories.  Maybe go to the start menu, go to all programs, and I think accessories was near the bottom of the list.  Once you get to the command prompt though, you can type chkdsk /f /r e: or whatever your card’s drive letter is, and chkdsk will try to find and repair bad/corrupt sectors on the card.  It seems to be worth a shot anyhow.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Kay Malmquist
Sent: Sunday, January 12, 2020 5:49 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] A problem with an SD card in a VR Trek

 

Can I do this in XP?  Sorry but that is what is on this machine. 

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown

----- Original Message -----

Sent: Sunday, January 12, 2020 7:16 AM

Subject: Re: [TechTalk] A problem with an SD card in a VR Trek

 

Good morning Kay.  I had an SD card do that to me about a month ago.  My computer wouldn’t let me open it, and I couldn’t get JAWS to read the actual volume label.  I was able to get at my documents and make the card work again with the repair functionality of chkdsk under Windows 10.  First, make sure that you know the drive letter of your card; for example, f:.  Do Windows key X, then arrow down to Windows Power Shell Admin, or instead hit the letter A.  A command prompt will open.  Type chkdsk /f /r f: and hit enter.  I don’t think it can do any harm, and it may work.  It takes a while to do its thing.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Kay Malmquist
Sent: Saturday, January 11, 2020 11:39 PM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] A problem with an SD card in a VR Trek

 

Hello,

I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


Re: A problem with an SD card in a VR Trek

Kay Malmquist
 

Can I do this in XP?  Sorry but that is what is on this machine. 
 
Kay Malmquist
kay.malmquist@...
 
No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown

----- Original Message -----
Sent: Sunday, January 12, 2020 7:16 AM
Subject: Re: [TechTalk] A problem with an SD card in a VR Trek

Good morning Kay.  I had an SD card do that to me about a month ago.  My computer wouldn’t let me open it, and I couldn’t get JAWS to read the actual volume label.  I was able to get at my documents and make the card work again with the repair functionality of chkdsk under Windows 10.  First, make sure that you know the drive letter of your card; for example, f:.  Do Windows key X, then arrow down to Windows Power Shell Admin, or instead hit the letter A.  A command prompt will open.  Type chkdsk /f /r f: and hit enter.  I don’t think it can do any harm, and it may work.  It takes a while to do its thing.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Kay Malmquist
Sent: Saturday, January 11, 2020 11:39 PM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] A problem with an SD card in a VR Trek

 

Hello,

I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


Re: A problem with an SD card in a VR Trek

Steven Johnson <saxmonger@...>
 

Good morning Kay.  I had an SD card do that to me about a month ago.  My computer wouldn’t let me open it, and I couldn’t get JAWS to read the actual volume label.  I was able to get at my documents and make the card work again with the repair functionality of chkdsk under Windows 10.  First, make sure that you know the drive letter of your card; for example, f:.  Do Windows key X, then arrow down to Windows Power Shell Admin, or instead hit the letter A.  A command prompt will open.  Type chkdsk /f /r f: and hit enter.  I don’t think it can do any harm, and it may work.  It takes a while to do its thing.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Kay Malmquist
Sent: Saturday, January 11, 2020 11:39 PM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] A problem with an SD card in a VR Trek

 

Hello,

I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


Re: A problem with an SD card in a VR Trek

Kay Malmquist
 

It is in the correct position.  I thought of that and checked.  Thanks though.
 
Kay Malmquist
kay.malmquist@...
 
No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown

----- Original Message -----
Sent: Sunday, January 12, 2020 4:25 AM
Subject: Re: [TechTalk] A problem with an SD card in a VR Trek

You could check the right-protect tab and make sure it is in the down position.

Just a thought.

 

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Kay Malmquist
Sent: January-12-20 1:39 AM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] A problem with an SD card in a VR Trek

 

Hello,

I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


Re: A problem with an SD card in a VR Trek

Monte Single
 

You could check the right-protect tab and make sure it is in the down position.

Just a thought.

 

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Kay Malmquist
Sent: January-12-20 1:39 AM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] A problem with an SD card in a VR Trek

 

Hello,

I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.

 

Kay Malmquist
kay.malmquist@...

 

No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


A problem with an SD card in a VR Trek

Kay Malmquist
 

Hello,
I added a couple of .docx to the text files folder of a card that I have been using for quite some time.  Now when I try to put it in my VRTrek,I get a media 3 error.  So I tried another card and all is fine with that.  So, I decided to put it back in to my computer and the disc name does not come up on the list of drives.  It just says the drive name.  When I press enter on it, I am asked if I want to reformat?  Ok, if it is corrupted is their any way to salvage what is on there?  I have a ton of notes that I really need for classes and things like that.  I have a san disc utility but I don't think that does any salvage functions.  any thoughts?  I have at least 30 GB of books and other things.  Please if you have any ideas, let me know.
 
Kay Malmquist
kay.malmquist@...
 
No matter where you are, no matter how difficult things might appear to be, you are always being moved toward magnificence. Always.
Author Unknown


Screen shots of Dell cart for Jim Rawls

Loy <loyrg2845@...>
 


                   

----- Original Message -----
Sent: Saturday, January 11, 2020 2:52 PM
Subject: Re: Screen shots of Dell cart for Jim Rawls

I am no expert but a 1.7 G HZ seems very slow.Most processors now are in the upper 2 or 3 GHZ. I have 12 year old laptop that has a 1.7 GHZ processor.
----- Original Message -----
From: Tyler Wood
Sent: Saturday, January 11, 2020 2:06 PM
Subject: Re: Screen shots of Dell cart for Jim Rawls

Hi,

This looks fine.

If you can at all afford it, I would recommend making that 2 x 8 gb ram, especially if you plan on keeping the machine for years to come.

 

 

From: main@jfw.groups.io <main@jfw.groups.io> On Behalf Of Jim Rawls
Sent: Saturday, January 11, 2020 12:44 PM
To: jimrawls <jazzpiano@...>
Subject: FW: Screen shots of Dell cart for Jim Rawls

 

Hi all, I am thinking of getting this computer. I will be using it for the usual stuff, email, surfing the net, and getting music to use for my internet radio show. Does this look good enough for this? I would appreciate your comments. Thanks, Jim

 

 

Dell Latitude 7390

Dell Latitude 7390, CTO

Processor

8th Gen Intel® Core™ i5-8350U Processor (Quad Core, 6MB Cache, 1.7GHz,15W)

Operating System

Windows 10 Pro 64bit English, French, Spanish

Windows AutoPilot

No Windows AutoPilot

Processor information

Intel® UHD Graphics 620 with Displayport over USB Type C with Core i5 vPro

Systems Management

Intel vPro™ Technology’s Advanced Management Features

Memory

8GB, 1x8GB, DDR4 2400MHz Memory

Hard Drive

M.2 512GB SATA Class 20 Solid State Drive

LCD

13.3" FHD (1920 x 1080) Embedded Touch Anti-Glare, IR Cam/Mic, WLAN capable, Narrow Bezel, Aluminum

Internal Keyboard

Internal English Keyboard, Backlit

Mouse

No Mouse Selected

Driver

Intel® Dual-Band Wireless-AC 8265 Wi-Fi + BT 4.2 Wireless Driver (2x2)

Wireless

Intel® Dual-Band Wireless-AC 8265 Wi-Fi + BT 4.2 Wireless Card (2x2), SAR

PalmRest

Single Pointing, 82 key, Smartcard, Contactless Smartcard, FP Reader, Displayport Type C, Aluminum

Mobile Broadband

No Mobile Broadband Card

Primary Battery

(4-cell) 60 Whr Express Charge Capable

Power Supply

65W AC Adapter, 3-pin

Cable

Power Cord, US

Placemat

Quick Reference Guide, English/French

Canada Ship Options

US No Canada Ship Charge

Diagnostic CD / Diskette

No Resource DVD

Documentation/Disks

Safety/Environment and Regulatory Guide (English/French)

ENERGY STAR

Not ENERGY STAR Qualified

FGA Module

No FGA

Label

Regulatory Label Included

Packaging

MIX SHIP Config (DAO)

Configuration Details

Flex 4

Processor Branding

8th Gen Intel Core i5 vPro Label

TAA

No TAA

Transportation from ODM to region

Standard Shipment

UPC Label

No UPC Label

Hardware Support Services

3 Years Hardware Warranty with Onsite/In-Home Service after Remote Diagnosis

Microsoft Office

Microsoft Office 30 Day Trial

Security Software

McAfee® Small Business Security 30 Day Free Trial

Docks & Port Replicators

No Docking Station

Non-Microsoft Application Software

Software for Windows 10

Operating System Recovery Options

No Media

 

 

 

 

 

 

 

$2,885.71

Hide savings

Price includes 69% off through Dell Small Business.Details

- $1,999.06

No interest if paid in full within 90 days on qualifying Latitude laptops $699 or more!Details

Item Total:

$886.65

 

 

On Jan 10, 2020, at 5:30 PM, Shen Kuan <SKuan@...> wrote:

Hi,
Sorry screenshots don't help me. But Jim did include the model number in his email so I will use that to see what it is.




Shen Kuan
Access Technology Coordinator
LightHouse for the Blind and Visually Impaired
1155 Market ST FL10
San Francisco, CA 94103
415-694-7312
lighthouse-sf.org

Follow us: Facebook Twitter YouTube Instagram



-----Original Message-----
From: Alta Rawls <blickeybear@...>
Sent: Thursday, January 09, 2020 8:39 PM
To: Shen Kuan <SKuan@...>
Subject: Screen shots of Dell cart for Jim Rawls



Do you have aspirations to be the next Holman Prize for Blind Ambition prizewinner? Holman Prize 2020 applications accepted January 15- February 2020. Learn the details here.<https://holmanprize.org>


Seeking a new web host

DJ
 

Hello to all, 
I have a domain which I use for a test website and email for my family. I am seeking suggestions for a decent, respectable, and secure service that won't charge me an arm and both legs. The primary use for this domain is email, but I do require the website as well. 
Thank you. DJ


test

Jim Rawls
 

 


test

Jim Rawls
 

 


FW: Screen shots of Dell cart for Jim Rawls

Jim Rawls
 

Hi all, I am thinking of getting this computer. I will be using it for the usual stuff, email, surfing the net, and getting music to use for my internet radio show. Does this look good enough for this? I would appreciate your comments. Thanks, Jim

 

 

Dell Latitude 7390

Dell Latitude 7390, CTO

Processor

8th Gen Intel® Core™ i5-8350U Processor (Quad Core, 6MB Cache, 1.7GHz,15W)

Operating System

Windows 10 Pro 64bit English, French, Spanish

Windows AutoPilot

No Windows AutoPilot

Processor information

Intel® UHD Graphics 620 with Displayport over USB Type C with Core i5 vPro

Systems Management

Intel vPro™ Technology’s Advanced Management Features

Memory

8GB, 1x8GB, DDR4 2400MHz Memory

Hard Drive

M.2 512GB SATA Class 20 Solid State Drive

LCD

13.3" FHD (1920 x 1080) Embedded Touch Anti-Glare, IR Cam/Mic, WLAN capable, Narrow Bezel, Aluminum

Internal Keyboard

Internal English Keyboard, Backlit

Mouse

No Mouse Selected

Driver

Intel® Dual-Band Wireless-AC 8265 Wi-Fi + BT 4.2 Wireless Driver (2x2)

Wireless

Intel® Dual-Band Wireless-AC 8265 Wi-Fi + BT 4.2 Wireless Card (2x2), SAR

PalmRest

Single Pointing, 82 key, Smartcard, Contactless Smartcard, FP Reader, Displayport Type C, Aluminum

Mobile Broadband

No Mobile Broadband Card

Primary Battery

(4-cell) 60 Whr Express Charge Capable

Power Supply

65W AC Adapter, 3-pin

Cable

Power Cord, US

Placemat

Quick Reference Guide, English/French

Canada Ship Options

US No Canada Ship Charge

Diagnostic CD / Diskette

No Resource DVD

Documentation/Disks

Safety/Environment and Regulatory Guide (English/French)

ENERGY STAR

Not ENERGY STAR Qualified

FGA Module

No FGA

Label

Regulatory Label Included

Packaging

MIX SHIP Config (DAO)

Configuration Details

Flex 4

Processor Branding

8th Gen Intel Core i5 vPro Label

TAA

No TAA

Transportation from ODM to region

Standard Shipment

UPC Label

No UPC Label

Hardware Support Services

3 Years Hardware Warranty with Onsite/In-Home Service after Remote Diagnosis

Microsoft Office

Microsoft Office 30 Day Trial

Security Software

McAfee® Small Business Security 30 Day Free Trial

Docks & Port Replicators

No Docking Station

Non-Microsoft Application Software

Software for Windows 10

Operating System Recovery Options

No Media

 

 

 

 

 

 

 

$2,885.71

Hide savings

Price includes 69% off through Dell Small Business.Details

- $1,999.06

No interest if paid in full within 90 days on qualifying Latitude laptops $699 or more!Details

Item Total:

$886.65

 



On Jan 10, 2020, at 5:30 PM, Shen Kuan <SKuan@...> wrote:

Hi,
Sorry screenshots don't help me. But Jim did include the model number in his email so I will use that to see what it is.




Shen Kuan
Access Technology Coordinator
LightHouse for the Blind and Visually Impaired
1155 Market ST FL10
San Francisco, CA 94103
415-694-7312
lighthouse-sf.org

Follow us: Facebook Twitter YouTube Instagram



-----Original Message-----
From: Alta Rawls <blickeybear@...>
Sent: Thursday, January 09, 2020 8:39 PM
To: Shen Kuan <SKuan@...>
Subject: Screen shots of Dell cart for Jim Rawls



Do you have aspirations to be the next Holman Prize for Blind Ambition prizewinner? Holman Prize 2020 applications accepted January 15- February 2020. Learn the details here.<https://holmanprize.org>


Re: Learning a new language

Olusegun -- Victory Associates LTD, Inc.
 

Akshaya, here's another resource worth looking at for learning new
languages; it is Radio Lingua. Visit its website at:

https://radiolingua.com/

It has a COFFEE BREAK approach to learning various languages. Example,
Coffee Break Spanish, Coffee Break French, etc.

Enjoy and have fun learning slicing and dicing new languages!

Sincerely,
Olusegun
Denver, Colorado


Re: reading a Microsoft excel sheet letter by letter

Troy Burnham
 

It took me a couple of tries yesterday but eventually hitting f2 and then the home key and using my arrow keys worked.

Yes I am using jaws, I have NVDA installed and I keep saying I'm going to start using it but I haven't yet.

Troy


On 1/10/2020 10:33 AM, Gene wrote:
I think Troy is using JAWS.  While I don't use Excel, I would think it likely that another way would be to route the JAWS cursor to the pc cursor and read the information that way.  There have already been other options discussed and it may somewhat be a matter of preference, but using the JAWS cursor hasn't been discussed yet.
 
Gene
----- Original Message -----
Sent: Friday, January 10, 2020 6:12 AM
Subject: Re: [TechTalk] reading a Microsoft excel sheet letter by letter

Hi all,

Troy, have you tried insert-up-arrow pressed twice quickly?  Don't know
what else to say except the best way to do this is via braille.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL:  akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site:  http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."




Re: reading a Microsoft excel sheet letter by letter

Gene
 

I think Troy is using JAWS.  While I don't use Excel, I would think it likely that another way would be to route the JAWS cursor to the pc cursor and read the information that way.  There have already been other options discussed and it may somewhat be a matter of preference, but using the JAWS cursor hasn't been discussed yet.
 
Gene

----- Original Message -----
Sent: Friday, January 10, 2020 6:12 AM
Subject: Re: [TechTalk] reading a Microsoft excel sheet letter by letter

Hi all,

Troy, have you tried insert-up-arrow pressed twice quickly?  Don't know
what else to say except the best way to do this is via braille.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL:  akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site:  http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."



Re: reading a Microsoft excel sheet letter by letter

Gene
 

I don't use Excel, but why NVDA plus up arrow?  That command moves you to the higher level object.  I would think just up arrow on the numpad is what you are discussing, which reads the current object.
 
Gene

----- Original Message -----
Sent: Thursday, January 09, 2020 7:36 PM
Subject: Re: [TechTalk] reading a Microsoft excel sheet letter by letter

As well as Howard's method, which will move through the whole cell contents, with NVDA, you can press NVDA+up arrow twice quickly (or if using laptop keyboard layout, NVDA+L twice quickly) which will spell the current line (press just once to read the text rather than spell it) - so you can read the first line within a cell without going into edit mode - names and phone numbers are probably only on one line each.

Quentin

On Fri, Jan 10, 2020 at 12:33 PM Howard Traxler <htraxler7@...> wrote:
When I need to do that, I go into edit mode (F2), then I can left and
right around in the field. When finished with that cell, I press enter
and realize I'm on the next row.  So, if I'm not finished with the
original row, I have to up arrow to get back to it.

Howard

On 1/9/2020 7:26 PM, Troy Burnham wrote:
> Hi all,
>
> I've just been given a Microsoft Excel sheet and I need to know how to
> read letter by letter in each column. It's a list of names and phone
> numbers and I need to be able to read especially the phone numbers one
> digit at a time.
>
> Thanks.
>
> Troy
>
>
>
>






--
Quentin Christensen
Training and Support Manager


Seeking very basic information about the PDI BrailleNote

Steven Johnson <saxmonger@...>
 

I have been asked to digitize some records and tapes for a lady who offers me a PDI (Pulse Data International I am guessing) BrailleNote for my services.  I have never had a BrailleNote, and know very little.  It belonged to her deceased brother, and she has no cords for it.  By description, it sounds old.  My questions are:

  1. Are power supplies for these older BrailleNotes easy to find, or do I have to pay through the nose because they are proprietary?
  2. Can these older units be used as a braille terminal in Windows 10 and JAWS 2019?  I do have a serial port.

 

Thanks in advance for any tips.  I just want it to serve as a braille display and to use it to braille into my Windows 10 PC.


Re: reading a Microsoft excel sheet letter by letter

Ron Canazzi
 

Hi Group,

Using NVDA, if you switch to the review cursor and try either the screen echo or object review setting, using the numpad keys 1 2 and 3 you can navigate each cell character by character.

On 1/10/2020 7:12 AM, Ann Parsons wrote:
Hi all,

Troy, have you tried insert-up-arrow pressed twice quickly?  Don't know what else to say except the best way to do this is via braille.

Ann P.
--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"

16821 - 16840 of 102353