Date   

Noise cancellation software

Robert Mendoza
 

Any one here could recommend a free and accessible noise cancellation software for Windows 10. Thanks.


Re: Google Home Max vs. Mini

Marie
 

Thanks, I was pretty sure about the sound, but am surprised at how good the sound is on a Mini.

Marie

On 7/29/2020 11:42 AM, Laz wrote:
Hi Marie,

The Google Home Max is much larger than the mini, hence much better
sound and volume, plus you actually get stereo out of it and two can
be paired together for better stereo separation.

laz

On 7/29/20, Marie <magpie.mn@gmail.com> wrote:
What does the Max do that the Minie does not, or is there any difference
other than perhaps the Max has better sound?

Thanks






Re: redoing windows 1909 is it safe to upgrade to the latest version?

Mary Smith
 

Hi Heather, I've been using the latest build of Windows for a while and I haven't had any issues.

On 2020-07-29 5:16 p.m., heather albright wrote:
Hello, I am redoing my windows 1909 but, the media tool wants to install the latest version, not 1909. So can anyone tell me if they have fixed all the issues and it is safe to upgrade? Thanks Heather
"Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan


sites
National Federation of The Blind:
www.nfb.org
an accessibil library for the blind:
www.bookshare.org



JAWS and Thunderbird

Abbie Taylor
 

A couple  of years ago when I subscribed to Office 365, I tried using Outlook because at the time, I was using NVDA, and Thunderbird wasn't as responsive as it had been with that screen reader. I discovered that Outlook worked a lot better with NVDA. 
 
This past winter, I switched to JAWS. Since then, I've had difficulty, in Outlook, navigating to links, headings, etc. in a message. Sometimes, when I click on a link, it jumps to the subject field. In the daily summary messages I receive from my lists at groups.io such as this one, when I click on a link to a topic that interests me, it takes me to a different message from the one I wanted. 
 
For those of you using JAWS with Thunderbird, how well does it work? Do you have difficulties similar to what I described above? I'd appreciate any input. Thank you in advance. 
--


Abbie Johnson Taylor, Author https://abbiescorner.wordpress.com

http://www.abbiejohnsontaylor.com

abbietaylor945@...

 


redoing windows 1909 is it safe to upgrade to the latest version?

heather albright
 

Hello, I am redoing my windows 1909 but, the media tool wants to install the latest version, not 1909. So can anyone tell me if they have fixed all the issues and it is safe to upgrade? Thanks Heather
"Blindness is a characteristic, not a handicap!" Dr. Kenneth Jernigan
 

sites
National Federation of The Blind:
www.nfb.org
an accessibil library for the blind:
www.bookshare.org


Re: All-in-One Printer

Monte Single
 

If you want an economical and longer lasting printer, get a laser, leave the inkjets at the store.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Howard Traxler
Sent: July 29, 2020 12:15 PM
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] All-in-One Printer

Hi all,
I'm possibly looking for a new All-in-One printer. I see Heartland Of America has an HP 5055 that is a thermal All-in-One printer. Does anyone know whether a thermal printer is as good or better than ink-jet; and how about the cost of operation and maintenance? I already have two HP All-in-One ink-jet printers, neither of which worked very long. I'd like to find one that lasts a bit longer. Any ideas?
Thanks.
Howard


Re: Google Home Max vs. Mini

Laz
 

Hi Marie,

The Google Home Max is much larger than the mini, hence much better
sound and volume, plus you actually get stereo out of it and two can
be paired together for better stereo separation.

laz

On 7/29/20, Marie <magpie.mn@gmail.com> wrote:
What does the Max do that the Minie does not, or is there any difference
other than perhaps the Max has better sound?

Thanks





--
Affordably priced Accessible Talking MP3 Player/book Reader, Victor
Reader Stream & Trek, blindshell Classic phone, Bluetooth devices, and
accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


All-in-One Printer

Howard Traxler
 

Hi all,
I'm possibly looking for a new All-in-One printer.  I see Heartland Of America has an HP 5055 that is a thermal All-in-One printer. Does anyone know whether a thermal printer is as good or better than ink-jet; and how about the cost of operation and maintenance?  I already have two HP All-in-One ink-jet printers, neither of which worked very long.  I'd like to find one that lasts a bit longer. Any ideas?
Thanks.
Howard


Re: BackUp vs Clone

Nancy Hill
 

Thanks Smiling AND Jeff!


Nancy

On 7/29/2020 2:08 AM, Smiling? wrote:
A clone is essentially a bit for bit copy of your drive, 100% identical hence the name clone very similar to you taking a cutting of a plant which genetically is going to be identical to the mother.

A backup can be automated (so can imaging software's as well), but generally is manually copied over whatever specifics the user desires to be backed up. A backup is a copy or more of the same thing.

These both have similarities, but think of a clone as you taking a snapshot of you getting yourself all made up and then you go and get pictures taken of yourself all made up. Now in this fantasy metaphor example, if desired, you can restore yourself to look exactly like the pictures taken back when you were all made up to be literally identical to the snapshots where you put forth whatever efforts to look whichever way you selectively chose to look.

So having such an image/clone just in case something happens to your system, you could take this image and do what is called restore the image. This means that bit for bit, it's going to be identical to the snapshot as whenever it was taken.

A backup, is copies of whatever you selectively chose to backup. So if something was for whatever reasons no longer made to work (audio file, movie, video you have created etc.), you could just copy over the additional copy that you backed up and overwrite it which would make that piece of data work once again.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Nancy Hill
Sent: Tuesday, July 28, 2020 20:01
To: TechTalk <main@TechTalk.groups.io>
Subject: [TechTalk] BackUp vs Clone

Everyone,

My laptop is running win10 and one of the latest jaws.


What is the difference between backing up a laptop's hard drive and cloning it?


Thanks,

Nancy






Google Home Max vs. Mini

Marie
 

What does the Max do that the Minie does not, or is there any difference other than perhaps the Max has better sound?

Thanks


Re: Can't Copy From Drop Box

lynn white
 

Hey Gene,

First of all, thanks as always. However, this problem is different. I can actually open the folder from Drop Box. However, when I have highlighted the file or folder in question and paste, I get a message that the copying process has been interrupted.  As I said, this started happening yesterday.

Thanks.

On 7/29/2020 8:58 AM, Gene wrote:
I suspect you may finally have gotten the new Drop Box update that has been out for months but that some people have just received recently.

Go to Drop Box in the system tray.  I don’t think that  you can do this in the System tray dialog your screen-reader offers.
Open the Drop box icon with the space bar or enter.  They both may work or try each.
Up arrow to preferences.  Up arrowing is much faster.
Tab until you get to open folders in.  If it says desktop Dropbox application or something similar, up arrow to file explorer.
Tab to and activate the ok button.  That will cause the old display where you can copy and paste to be used.

Gene
-----Original Message----- From: lynn white
Sent: Wednesday, July 29, 2020 8:17 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Can't Copy From Drop Box

As of yesterday, I can't either upload or download to Drop Box. I've
tried searching help on Drop Box and Google and can find nothing of
consequence.

Thanks for any ideas.






Re: Can't Copy From Drop Box

Gene
 

I suspect you may finally have gotten the new Drop Box update that has been out for months but that some people have just received recently.

Go to Drop Box in the system tray. I don’t think that you can do this in the System tray dialog your screen-reader offers.
Open the Drop box icon with the space bar or enter. They both may work or try each.
Up arrow to preferences. Up arrowing is much faster.
Tab until you get to open folders in. If it says desktop Dropbox application or something similar, up arrow to file explorer.
Tab to and activate the ok button. That will cause the old display where you can copy and paste to be used.

Gene

-----Original Message-----
From: lynn white
Sent: Wednesday, July 29, 2020 8:17 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Can't Copy From Drop Box

As of yesterday, I can't either upload or download to Drop Box. I've
tried searching help on Drop Box and Google and can find nothing of
consequence.

Thanks for any ideas.


Re: Checking On A Disc Drive

Geoff Eden
 

Try JAWS key with the tab.

Geoff

-----Original Message-----
From: Monte Single
Sent: Tuesday, July 28, 2020 7:02 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Checking On A Disc Drive

HiLynn,

When the drive is selected, press alt plus the enter and the properties dialog for the drive will open.
Nvda reads the info automaticly, I think there is a key combo you have to use with jaws to here the info.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of lynn white
Sent: July 28, 2020 3:48 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Checking On A Disc Drive

Using Windows 10, how do you check how full an external drive is? Thanks.


Can't Copy From Drop Box

lynn white
 

As of yesterday, I can't either upload or download to Drop Box. I've tried searching help on Drop Box and Google and can find nothing of consequence.

Thanks for any ideas.


Re: Problems with pc start and NVDA

Mike B
 


Translation please?!

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Smiling?
Sent: Wednesday, July 29, 2020 3:12 AM
Subject: Re: [TechTalk] Problems with pc start and NVDA

Wow, großes Lächeln! Das ist super cool für uns, das erste Mal, dass ich es gemacht habe, was keine große Sache ist, weiß ich, lächelt.
OK, Sie haben in der Vergangenheit regelmäßig ein Passwort verwendet, aber jetzt, aus welchen Gründen auch immer, ist es immer ungenau, von dem Sie wissen,
dass es falsch ist, oder? Wann hat das angefangen?
Ich suche nach einer Möglichkeit, das Passwort zu umgehen, und glaube, ich habe einige würdige Dinge gefunden, die ich ausprobieren kann.
Hast du eine Vision? Ich frage, weil Sie in der Lage sind, in das BIOS zu gehen, wie Sie gesagt haben, oder haben Sie vielleicht Hilfe gesehen?
Dies gibt uns mehr Optionen und nein, ich glaube nicht, dass Windows neu installiert werden muss, aber wenn Sie dies tun möchten, liegt es ganz bei Ihnen,
lächelt. Schön, miteinander zu reden.


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 2:40
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Ja hallo!
Ja. Ich hahbe immer ein Paswort verwendet. Aber jetzt lässt es der Computer nicht mehr zu, dass ich es eingebe. Er wird immerr alsfalsch annerkannt. Verstehst du? Außerdem ist NVDA eingeschaltet und ich kann es nicht ausschalten. Der Bildschirm ist wegen des Bldschirmvorhang-Addons verdunkelt. Kein Sehender kann mir helfen und NVDA sagt nichts, also ich kann mir auch nicht helfen. Ich kenne mein Paswort ser gut. Ich habe ihn immerr gut eingegeben, aber seit gestern bekomme ich nur die Meldung, dass es falsch ist. Außerdem hat Windows ein Fehlerr beim Laden. Ich war auch in den BIOS-Einstellungen, aber da kann ich auch nichts neues machen. Ich glaube, ich muss Windows neuinstalieren oder?

Von meinem iPhone gesendet

> Am 29.07.2020 um 11:32 schrieb Smiling? <blind7@...>:
>
> This is using Google Translate, this is what I posted a little bit ago in German.
>
> Weißt du, ich bin mir nicht sicher. Also, was machst du? Den Computer herunterfahren? Und starten Sie es Backup und es geht an die Frage nach dem Passwort, oder?
>
> Haben Sie in der Vergangenheit ein Passwort für Ihren Computer verwendet?
> Ist das nichts Neues für Sie, wenn Sie ein Passwort verwenden, um Ihren Computer zu starten?
>
> Ich bin gespannt, wie Sie Ihren Computer gestartet haben, bevor dies alles begann.
>
> -----Original Message-----
> From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
> Cristina Ebetiuc
> Sent: Wednesday, July 29, 2020 0:12
> To: main@techtalk.groups.io
> Subject: Re: [TechTalk] Problems with pc start and NVDA
>
> Hey.
> No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately.. :( What could help else?
>
> Von meinem iPhone gesendet
>
>> Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@...>:
>>
>> Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.
>>
>> Clear the previous text within a password before typing in your password:
>>
>> 1. Do a select all command of Control+A.
>> 2. Hitting delete will clear everything.
>> 3. Type in your password.
>>
>> -----Original Message-----
>> From: Smiling? <blind7@...>
>> Sent: Tuesday, July 28, 2020 4:05
>> To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
>> Subject: RE: [TechTalk] Problems with pc start and NVDA
>>
>> I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?
>>
>> If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?
>>
>>
>> -----Original Message-----
>> From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
>> Cristina Ebetiuc
>> Sent: Tuesday, July 28, 2020 3:27
>> To: main@techtalk.groups.io
>> Subject: Re: [TechTalk] Problems with pc start and NVDA
>>
>> I did exactely as you said. It seems not to work. Ok if it is not
>> safe mode what then? Thank you for help
>>
>> Von meinem iPhone gesendet
>>
>>>> Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@...>:
>>>
>>> Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.
>>>
>>> Windows10 machine out of Safe Mode using Command Prompt.
>>>
>>> 1. Open Command Prompt as administrator using the Run Dialogue:
>>> Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.
>>>
>>> 2. Type exactly what it is below:
>>> bcdedit /deletevalue {current} safeboot and hit the Enter key. This
>>> will turn off Safe Mode.
>>>
>>> 3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.
>>>
>>> -----Original Message-----
>>> From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
>>> Cristina Ebetiuc
>>> Sent: Tuesday, July 28, 2020 0:27
>>> To: main@techtalk.groups.io
>>> Subject: [TechTalk] Problems with pc start and NVDA
>>>
>>> Hi
>>> I have a big problem.
>>> I think, I have started my pc into safe-mode.  Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just  does nothing. Well and the other problem that the screen courtain is turned on.  ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
>>> Thanks.
>>> Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......
>>>
>>> Von meinem iPhone gesendet
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>>
>
>
>
>
>
>






Re: Problems with pc start and NVDA

Smiling?
 

Haben Sie tatsächlich versucht, Narrator zu starten, während Sie in Ihrem Passwortbereich platziert wurden?
Strg + Windows-Taste + Eingabetaste
Ein- und Ausschalten des Erzählers.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 2:40
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Ja hallo!
Ja. Ich hahbe immer ein Paswort verwendet. Aber jetzt lässt es der Computer nicht mehr zu, dass ich es eingebe. Er wird immerr alsfalsch annerkannt. Verstehst du? Außerdem ist NVDA eingeschaltet und ich kann es nicht ausschalten. Der Bildschirm ist wegen des Bldschirmvorhang-Addons verdunkelt. Kein Sehender kann mir helfen und NVDA sagt nichts, also ich kann mir auch nicht helfen. Ich kenne mein Paswort ser gut. Ich habe ihn immerr gut eingegeben, aber seit gestern bekomme ich nur die Meldung, dass es falsch ist. Außerdem hat Windows ein Fehlerr beim Laden. Ich war auch in den BIOS-Einstellungen, aber da kann ich auch nichts neues machen. Ich glaube, ich muss Windows neuinstalieren oder?

Von meinem iPhone gesendet

Am 29.07.2020 um 11:32 schrieb Smiling? <blind7@sbcglobal.net>:

This is using Google Translate, this is what I posted a little bit ago in German.

Weißt du, ich bin mir nicht sicher. Also, was machst du? Den Computer herunterfahren? Und starten Sie es Backup und es geht an die Frage nach dem Passwort, oder?

Haben Sie in der Vergangenheit ein Passwort für Ihren Computer verwendet?
Ist das nichts Neues für Sie, wenn Sie ein Passwort verwenden, um Ihren Computer zu starten?

Ich bin gespannt, wie Sie Ihren Computer gestartet haben, bevor dies alles begann.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 0:12
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Hey.
No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately.. :( What could help else?

Von meinem iPhone gesendet

Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.

Clear the previous text within a password before typing in your password:

1. Do a select all command of Control+A.
2. Hitting delete will clear everything.
3. Type in your password.

-----Original Message-----
From: Smiling? <blind7@sbcglobal.net>
Sent: Tuesday, July 28, 2020 4:05
To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
Subject: RE: [TechTalk] Problems with pc start and NVDA

I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?

If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 3:27
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

I did exactely as you said. It seems not to work. Ok if it is not
safe mode what then? Thank you for help

Von meinem iPhone gesendet

Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@sbcglobal.net>:
Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.

Windows10 machine out of Safe Mode using Command Prompt.

1. Open Command Prompt as administrator using the Run Dialogue:
Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.

2. Type exactly what it is below:
bcdedit /deletevalue {current} safeboot and hit the Enter key. This
will turn off Safe Mode.

3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 0:27
To: main@techtalk.groups.io
Subject: [TechTalk] Problems with pc start and NVDA

Hi
I have a big problem.
I think, I have started my pc into safe-mode. Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just does nothing. Well and the other problem that the screen courtain is turned on. ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
Thanks.
Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......

Von meinem iPhone gesendet













Re: Problems with pc start and NVDA

Smiling?
 

Wow, großes Lächeln! Das ist super cool für uns, das erste Mal, dass ich es gemacht habe, was keine große Sache ist, weiß ich, lächelt.
OK, Sie haben in der Vergangenheit regelmäßig ein Passwort verwendet, aber jetzt, aus welchen Gründen auch immer, ist es immer ungenau, von dem Sie wissen,
dass es falsch ist, oder? Wann hat das angefangen?
Ich suche nach einer Möglichkeit, das Passwort zu umgehen, und glaube, ich habe einige würdige Dinge gefunden, die ich ausprobieren kann.
Hast du eine Vision? Ich frage, weil Sie in der Lage sind, in das BIOS zu gehen, wie Sie gesagt haben, oder haben Sie vielleicht Hilfe gesehen?
Dies gibt uns mehr Optionen und nein, ich glaube nicht, dass Windows neu installiert werden muss, aber wenn Sie dies tun möchten, liegt es ganz bei Ihnen,
lächelt. Schön, miteinander zu reden.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 2:40
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Ja hallo!
Ja. Ich hahbe immer ein Paswort verwendet. Aber jetzt lässt es der Computer nicht mehr zu, dass ich es eingebe. Er wird immerr alsfalsch annerkannt. Verstehst du? Außerdem ist NVDA eingeschaltet und ich kann es nicht ausschalten. Der Bildschirm ist wegen des Bldschirmvorhang-Addons verdunkelt. Kein Sehender kann mir helfen und NVDA sagt nichts, also ich kann mir auch nicht helfen. Ich kenne mein Paswort ser gut. Ich habe ihn immerr gut eingegeben, aber seit gestern bekomme ich nur die Meldung, dass es falsch ist. Außerdem hat Windows ein Fehlerr beim Laden. Ich war auch in den BIOS-Einstellungen, aber da kann ich auch nichts neues machen. Ich glaube, ich muss Windows neuinstalieren oder?

Von meinem iPhone gesendet

Am 29.07.2020 um 11:32 schrieb Smiling? <blind7@sbcglobal.net>:

This is using Google Translate, this is what I posted a little bit ago in German.

Weißt du, ich bin mir nicht sicher. Also, was machst du? Den Computer herunterfahren? Und starten Sie es Backup und es geht an die Frage nach dem Passwort, oder?

Haben Sie in der Vergangenheit ein Passwort für Ihren Computer verwendet?
Ist das nichts Neues für Sie, wenn Sie ein Passwort verwenden, um Ihren Computer zu starten?

Ich bin gespannt, wie Sie Ihren Computer gestartet haben, bevor dies alles begann.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 0:12
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Hey.
No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately.. :( What could help else?

Von meinem iPhone gesendet

Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.

Clear the previous text within a password before typing in your password:

1. Do a select all command of Control+A.
2. Hitting delete will clear everything.
3. Type in your password.

-----Original Message-----
From: Smiling? <blind7@sbcglobal.net>
Sent: Tuesday, July 28, 2020 4:05
To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
Subject: RE: [TechTalk] Problems with pc start and NVDA

I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?

If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 3:27
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

I did exactely as you said. It seems not to work. Ok if it is not
safe mode what then? Thank you for help

Von meinem iPhone gesendet

Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@sbcglobal.net>:
Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.

Windows10 machine out of Safe Mode using Command Prompt.

1. Open Command Prompt as administrator using the Run Dialogue:
Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.

2. Type exactly what it is below:
bcdedit /deletevalue {current} safeboot and hit the Enter key. This
will turn off Safe Mode.

3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 0:27
To: main@techtalk.groups.io
Subject: [TechTalk] Problems with pc start and NVDA

Hi
I have a big problem.
I think, I have started my pc into safe-mode. Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just does nothing. Well and the other problem that the screen courtain is turned on. ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
Thanks.
Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......

Von meinem iPhone gesendet













Re: Problems with pc start and NVDA

Cristina Ebetiuc
 

Ja hallo!
Ja. Ich hahbe immer ein Paswort verwendet. Aber jetzt lässt es der Computer nicht mehr zu, dass ich es eingebe. Er wird immerr alsfalsch annerkannt. Verstehst du? Außerdem ist NVDA eingeschaltet und ich kann es nicht ausschalten. Der Bildschirm ist wegen des Bldschirmvorhang-Addons verdunkelt. Kein Sehender kann mir helfen und NVDA sagt nichts, also ich kann mir auch nicht helfen. Ich kenne mein Paswort ser gut. Ich habe ihn immerr gut eingegeben, aber seit gestern bekomme ich nur die Meldung, dass es falsch ist. Außerdem hat Windows ein Fehlerr beim Laden. Ich war auch in den BIOS-Einstellungen, aber da kann ich auch nichts neues machen. Ich glaube, ich muss Windows neuinstalieren oder?

Von meinem iPhone gesendet

Am 29.07.2020 um 11:32 schrieb Smiling? <blind7@sbcglobal.net>:

This is using Google Translate, this is what I posted a little bit ago in German.

Weißt du, ich bin mir nicht sicher. Also, was machst du? Den Computer herunterfahren? Und starten Sie es Backup und es geht an die Frage nach dem Passwort, oder?

Haben Sie in der Vergangenheit ein Passwort für Ihren Computer verwendet?
Ist das nichts Neues für Sie, wenn Sie ein Passwort verwenden, um Ihren Computer zu starten?

Ich bin gespannt, wie Sie Ihren Computer gestartet haben, bevor dies alles begann.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 0:12
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Hey.
No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately... :( What could help else?

Von meinem iPhone gesendet

Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.

Clear the previous text within a password before typing in your password:

1. Do a select all command of Control+A.
2. Hitting delete will clear everything.
3. Type in your password.

-----Original Message-----
From: Smiling? <blind7@sbcglobal.net>
Sent: Tuesday, July 28, 2020 4:05
To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
Subject: RE: [TechTalk] Problems with pc start and NVDA

I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?

If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 3:27
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

I did exactely as you said. It seems not to work. Ok if it is not safe
mode what then? Thank you for help

Von meinem iPhone gesendet

Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@sbcglobal.net>:
Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.

Windows10 machine out of Safe Mode using Command Prompt.

1. Open Command Prompt as administrator using the Run Dialogue:
Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.

2. Type exactly what it is below:
bcdedit /deletevalue {current} safeboot and hit the Enter key. This
will turn off Safe Mode.

3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 0:27
To: main@techtalk.groups.io
Subject: [TechTalk] Problems with pc start and NVDA

Hi
I have a big problem.
I think, I have started my pc into safe-mode. Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just does nothing. Well and the other problem that the screen courtain is turned on. ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
Thanks.
Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......

Von meinem iPhone gesendet













Re: Problems with pc start and NVDA

Smiling?
 

This is using Google Translate, this is what I posted a little bit ago in German.

Weißt du, ich bin mir nicht sicher. Also, was machst du? Den Computer herunterfahren? Und starten Sie es Backup und es geht an die Frage nach dem Passwort, oder?

Haben Sie in der Vergangenheit ein Passwort für Ihren Computer verwendet?
Ist das nichts Neues für Sie, wenn Sie ein Passwort verwenden, um Ihren Computer zu starten?

Ich bin gespannt, wie Sie Ihren Computer gestartet haben, bevor dies alles begann.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 0:12
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Hey.
No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately... :( What could help else?

Von meinem iPhone gesendet

Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.

Clear the previous text within a password before typing in your password:

1. Do a select all command of Control+A.
2. Hitting delete will clear everything.
3. Type in your password.

-----Original Message-----
From: Smiling? <blind7@sbcglobal.net>
Sent: Tuesday, July 28, 2020 4:05
To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
Subject: RE: [TechTalk] Problems with pc start and NVDA

I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?

If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 3:27
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

I did exactely as you said. It seems not to work. Ok if it is not safe
mode what then? Thank you for help

Von meinem iPhone gesendet

Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.

Windows10 machine out of Safe Mode using Command Prompt.

1. Open Command Prompt as administrator using the Run Dialogue:
Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.

2. Type exactly what it is below:
bcdedit /deletevalue {current} safeboot and hit the Enter key. This
will turn off Safe Mode.

3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 0:27
To: main@techtalk.groups.io
Subject: [TechTalk] Problems with pc start and NVDA

Hi
I have a big problem.
I think, I have started my pc into safe-mode. Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just does nothing. Well and the other problem that the screen courtain is turned on. ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
Thanks.
Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......

Von meinem iPhone gesendet









Re: Problems with pc start and NVDA

Smiling?
 

You know, I am not sure. So what do you do? Shut down the computer? And start it backup and it goes to the asking you for the password, right?

Did you use a password in the past for your computer?
Is this nothing new for you, using a password to start your computer?

I am curious as to how you booted into your computer before this all started happening?

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristina Ebetiuc
Sent: Wednesday, July 29, 2020 0:12
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

Hey.
No. Instill have problems. He justt can‘t accept the pasword and I have deleted everything and rezenteres it many times. But unfortunately... :( What could help else?

Von meinem iPhone gesendet

Am 29.07.2020 um 09:04 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure if you were ever able to get past your password misfortune, and even though you were given a few answers that I would see working for your situation, here it is again below just in case.

Clear the previous text within a password before typing in your password:

1. Do a select all command of Control+A.
2. Hitting delete will clear everything.
3. Type in your password.

-----Original Message-----
From: Smiling? <blind7@sbcglobal.net>
Sent: Tuesday, July 28, 2020 4:05
To: 'main@TechTalk.groups.io' <main@TechTalk.groups.io>
Subject: RE: [TechTalk] Problems with pc start and NVDA

I went down and reread what you initially posted, and if you're actually at a password, where the system is asking you for the password, did you even use a password before all of this?

If not Safe Mode? I don't understand what it is that you mean. Didn't you say that you went I'm guessing to msconfig and make it so your computer would boot into Safe Mode right? That's the only reason we're even talking about it, but if you truly weren't actually trying to make it boot into Safe Mode and it's now asking you for a password. Trip trip trippy. Maybe this is all due to that registery file you spoke of. Is that when all of this pretty much started?


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 3:27
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Problems with pc start and NVDA

I did exactely as you said. It seems not to work. Ok if it is not safe
mode what then? Thank you for help

Von meinem iPhone gesendet

Am 28.07.2020 um 10:49 schrieb Smiling? <blind7@sbcglobal.net>:

Not sure of what OS it is that you are using, but if you are using Windows10, then just follow the steps below.

Windows10 machine out of Safe Mode using Command Prompt.

1. Open Command Prompt as administrator using the Run Dialogue:
Windows key+R for the Run Dialogue; now type exactly cmd and use the keystroke Control+Shift+Enter to open and run it as admin.

2. Type exactly what it is below:
bcdedit /deletevalue {current} safeboot and hit the Enter key. This
will turn off Safe Mode.

3. Close the Command Prompt window and reboot, (Windows+X & R for reboot). Your computer should start up back in its normal mode.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Cristina Ebetiuc
Sent: Tuesday, July 28, 2020 0:27
To: main@techtalk.groups.io
Subject: [TechTalk] Problems with pc start and NVDA

Hi
I have a big problem.
I think, I have started my pc into safe-mode. Ihave justt restarted the pc and now it does not say anything. There are only the log-in options on the braille display. When I try to enter the pin it says that there is an error and I can‘t read more because when I try to go a line down with the braille display it just does nothing. Well and the other problem that the screen courtain is turned on. ...... Ah and also after I have reseted the Mikrosoft pasword it still says that it is not right. Does anybody have a solving?
Thanks.
Oh and I also did a registry patch inorder for NVDA to function in the safe.mode but now.... well.... I can‘t hear nothing. Well I did not intend to boot into safe.mode. I just think that is the problem......

Von meinem iPhone gesendet








5081 - 5100 of 96341