Date   

Re: closing laptop's lid while using?

lynn white
 

I did some looking around in power settings, I looked at what happens when closing the lid. My setting shows that the computer will shut down. These settings can be changed.

So, if you have a similar setting, it will be fine to shut the machine's lid and expect it to shut down. Hope this helps.

On 8/10/2020 3:36 PM, Gene wrote:
For one thing, a sighted persohn wouldn't close the lid.  That is a hint that laptops aren't designed to operate in that way.  How hot a computer gets depends on the computer and I don't know if one can generalize.  But wwhy do anything that causes extra heat to build up that might be too much. Also, I don't know what the default action is, but laptops generally are set at the factory to shut down or sleepp or in some way stop or suspend working when the lid is closed.  You can change the close the lid setting to do nothing, in which case the computer will still run but again, I think the setting that by default in some way stops operation is a hint that it is not a good idea to let a computer run with the lid down.  And why did the person want to do so in the first place?  I see no benefit.  Just because someone may think its cool to do something because its appealing doesn't mean it is.

Gene
-----Original Message----- From: Troy Burnham
Sent: Monday, August 10, 2020 3:23 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] closing laptop's lid while using?

Hi all,

I use a USB keyboard with my laptop and somebody who also uses a USB
keyboard told me the other day that they keep the lid closed even when
they're using it. I just wonder if that's advisable though because I
remember once I let my mom use my laptop, and she just closed the lid
without shutting it down first and when I found out and went back
several hours later the whole machine was so hot that I could barely
touch it.

That was several years ago now, but between that and leaving a desktop
computer on for a few days in a row many years ago and the motherboard
ended up burning up I don't want to take any chances, but if there is
some way that I can keep my laptop lid closed when I'm using it and the
heat won't damage it I might do that.

Oh, I don't run my laptop 24/7 but it is on all day long most days.

Thanks in advance for any thoughts on this matter.

Troy







Re: closing laptop's lid while using?

Troy Burnham
 

Gene,

That's why I asked before I tried it, I have no idea why the person who told me they do this does it.

Troy

On 8/10/2020 3:36 PM, Gene wrote:
For one thing, a sighted persohn wouldn't close the lid.  That is a hint that laptops aren't designed to operate in that way.  How hot a computer gets depends on the computer and I don't know if one can generalize.  But wwhy do anything that causes extra heat to build up that might be too much. Also, I don't know what the default action is, but laptops generally are set at the factory to shut down or sleepp or in some way stop or suspend working when the lid is closed.  You can change the close the lid setting to do nothing, in which case the computer will still run but again, I think the setting that by default in some way stops operation is a hint that it is not a good idea to let a computer run with the lid down.  And why did the person want to do so in the first place?  I see no benefit.  Just because someone may think its cool to do something because its appealing doesn't mean it is.

Gene
-----Original Message----- From: Troy Burnham
Sent: Monday, August 10, 2020 3:23 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] closing laptop's lid while using?

Hi all,

I use a USB keyboard with my laptop and somebody who also uses a USB
keyboard told me the other day that they keep the lid closed even when
they're using it. I just wonder if that's advisable though because I
remember once I let my mom use my laptop, and she just closed the lid
without shutting it down first and when I found out and went back
several hours later the whole machine was so hot that I could barely
touch it.

That was several years ago now, but between that and leaving a desktop
computer on for a few days in a row many years ago and the motherboard
ended up burning up I don't want to take any chances, but if there is
some way that I can keep my laptop lid closed when I'm using it and the
heat won't damage it I might do that.

Oh, I don't run my laptop 24/7 but it is on all day long most days.

Thanks in advance for any thoughts on this matter.

Troy







Re: closing laptop's lid while using?

lynn white
 

I've done that before. But generally, I shut it down first. But these days, if you close the lid it will shut down and you restart it when raising the lid or hit the button to restart.

On 8/10/2020 3:23 PM, Troy Burnham wrote:
Hi all,

I use a USB keyboard with my laptop and somebody who also uses a USB keyboard told me the other day that they keep the lid closed even when they're using it. I just wonder if that's advisable though because I remember once I let my mom use my laptop, and she just closed the lid without shutting it down first and when I found out and went back several hours later the whole machine was so hot that I could barely touch it.

That was several years ago now, but between that and leaving a desktop computer on for a few days in a row many years ago and the motherboard ended up burning up I don't want to take any chances, but if there is some way that I can keep my laptop lid closed when I'm using it and the heat won't damage it I might do that.

Oh, I don't run my laptop 24/7 but it is on all day long most days.

Thanks in advance for any thoughts on this matter.

Troy




Re: closing laptop's lid while using?

Gene
 

For one thing, a sighted persohn wouldn't close the lid. That is a hint that laptops aren't designed to operate in that way. How hot a computer gets depends on the computer and I don't know if one can generalize. But wwhy do anything that causes extra heat to build up that might be too much. Also, I don't know what the default action is, but laptops generally are set at the factory to shut down or sleepp or in some way stop or suspend working when the lid is closed. You can change the close the lid setting to do nothing, in which case the computer will still run but again, I think the setting that by default in some way stops operation is a hint that it is not a good idea to let a computer run with the lid down. And why did the person want to do so in the first place? I see no benefit. Just because someone may think its cool to do something because its appealing doesn't mean it is.

Gene

-----Original Message-----
From: Troy Burnham
Sent: Monday, August 10, 2020 3:23 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] closing laptop's lid while using?

Hi all,

I use a USB keyboard with my laptop and somebody who also uses a USB
keyboard told me the other day that they keep the lid closed even when
they're using it. I just wonder if that's advisable though because I
remember once I let my mom use my laptop, and she just closed the lid
without shutting it down first and when I found out and went back
several hours later the whole machine was so hot that I could barely
touch it.

That was several years ago now, but between that and leaving a desktop
computer on for a few days in a row many years ago and the motherboard
ended up burning up I don't want to take any chances, but if there is
some way that I can keep my laptop lid closed when I'm using it and the
heat won't damage it I might do that.

Oh, I don't run my laptop 24/7 but it is on all day long most days.

Thanks in advance for any thoughts on this matter.

Troy


Re: Groups.io and Charter Email

joseph hudson <jhud7789@...>
 

What exactly is the issue? Are you not able to receive are you not able to send what's the deal?
joseph hudson

Email FaceTime and iMessage
jhud7789@...


Office phone/what's up messenger

254-300-7667

Emergency sell

254-813-2461

https://www.facebook.com/joseph.hudson.9404

https://twitter.com/josephhudson89

On Aug 10, 2020, at 3:25 PM, Marie <magpie.mn@...> wrote:

I have a charter email account set up and I can send and receive messages just fine except to or from Groups.io. Is there some conflict between the two?

Marie


Groups.io and Charter Email

Marie
 

I have a charter email account set up and I can send and receive messages just fine except to or from Groups.io. Is there some conflict between the two?
 
Marie


closing laptop's lid while using?

Troy Burnham
 

Hi all,

I use a USB keyboard with my laptop and somebody who also uses a USB keyboard told me the other day that they keep the lid closed even when they're using it. I just wonder if that's advisable though because I remember once I let my mom use my laptop, and she just closed the lid without shutting it down first and when I found out and went back several hours later the whole machine was so hot that I could barely touch it.

That was several years ago now, but between that and leaving a desktop computer on for a few days in a row many years ago and the motherboard ended up burning up I don't want to take any chances, but if there is some way that I can keep my laptop lid closed when I'm using it and the heat won't damage it I might do that.

Oh, I don't run my laptop 24/7 but it is on all day long most days.

Thanks in advance for any thoughts on this matter.

Troy


Re: Spotify

Sugar Lopez
 

I love it but I use it on my Iphone

sugar

 

“How lucky I am to have something that makes saying goodbye so hard.”

- - Winnie the Pooh

🙏, 😘

I appreciate your friendship/support at:

https://www.gofundme.com/sugars-transplant-journey

-Sugar

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Cristóbal
Sent: Monday, August 10, 2020 11:37 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Spotify

 

The few times I’ve used it on my PC (via the browser and not the Win 10 app), it’s been fine. I’m almost exclusively an iPhone user for this service though.

 

say

 

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Jeffrey Schwartz
Sent: Monday, August 10, 2020 10:22 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Spotify

 

How well does this application work with jaws

Thanks,

Jeff


Re: Spotify

Gene
 

I haven't used it with JAWS but it works well when I use NVDA with a browser. But in terms of using the actual desktop application, I can't comment on that. And I don't know how accessible a lot of features are either when using the browser or the application. I use it in a way people generally don't, for listening to albums or specific songs or already created playlists. I haven't used it much for quite a while, either. I don't use the social media aspects nor do I create playlists.

It appears to me, however, that a serious drawback to using a browser is the inability to move back and forward within a playing track. I can move forward from track to track but not back. I tried to find short cut keys to be used with the browser interface for these ;purposes, but I found none. I saw one message in a discussion that said that you can't do these things using the desktop application. I don't know if that is true.

While I don't know this, I suspect you will be more satisfied with the computer application if it is accessible. It has commands to do the kinds of things I've been discussing.

Gene

-----Original Message-----
From: Cristóbal
Sent: Monday, August 10, 2020 1:37 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Spotify



The few times I’ve used it on my PC (via the browser and not the Win 10 app), it’s been fine. I’m almost exclusively an iPhone user for this service though.



say





Cristóbal







From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Jeffrey Schwartz
Sent: Monday, August 10, 2020 10:22 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Spotify





How well does this application work with jaws

Thanks,

Jeff


Re: Spotify

Cristóbal
 

The few times I’ve used it on my PC (via the browser and not the Win 10 app), it’s been fine. I’m almost exclusively an iPhone user for this service though.

 

say

 

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Jeffrey Schwartz
Sent: Monday, August 10, 2020 10:22 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Spotify

 

How well does this application work with jaws

Thanks,

Jeff


Spotify

Jeffrey Schwartz
 

How well does this application work with jaws

Thanks,

Jeff


Re: 3d printing

heather albright
 


AN interesting article. Thanks Heather

----- Original Message -----
Sent: Sunday, August 9, 2020 10:01 PM
Subject: Re: [TechTalk] 3d printing

I don't have an answer Heather, but I wonder if there are at least several factors involved:

1) Complexity: A Braille display has a lot of moving parts - each Braille cell needs six (often 8) moving individual pins, plus the frame, plus whatever holds them plus the circuitry to run it.  So even a 14 cell Braille display would need 112 pieces printed individually just for the pins.  You could probably setup and print a "Sheet" of them that you then snap off, much like the little plastic pieces you get in a model kit, but even so, putting them together is going to be fiddly.

Assuming you overcome that, you also need someone to make those models in the first place.  For many companies, by the time they have invested the R&D into that, they're probably going to think it is more worth their while simply employing a factory to make the units, and sell them with such a markup that they recoup their costs.  If they distributed 3D files for you to print yourself, A) they'd need to sell a lot to cover the cost, b) Who would be responsible for faults? and c) Unless they made them very cheap (see point a)) they'd likely find the files were readily pirated and shared between people, with no revenue then going back to them.

That's all pure speculation off the top of my head, I really haven't looked into it.  I expect the complexity would be a big issue.  A 3d Printed Braille stylus I expect wouldn't be that hard to make (if someone hasn't already) as would be something like a signature guide. But many of the 3d models I've seen, particularly at the consumer end of the scale, tend to be things which can be printed in one or at least a small number of pieces.

But I am definitely surprised there doesn't seem to be more out there.

Actually just looking, here is an article from 2016 on a 3d printed refreshable Braille display which aimed to be a low cost device: https://www.3ders.org/articles/20160508-low-cost-3d-printed-braille-reader-aims-to-increase-literacy-rates-for-the-blind.html

There might be more out there!

Quentin.

On Sat, Aug 8, 2020 at 2:57 AM heather albright <kd5cbl@...> wrote:
I was thinking now, we can just 3d print our parts  to make our braille displays so they would be cheaper; the embossers would be cheaper; electric braille labeler makers would be cheaper etc. It has not happened this way, wonder why? So is the cost of 3d printing off set the cost of making these items or has 3d printing not cost effective enough to make these items? I read about people being able to 3d print houses which is much larger than say a braille display or embosser so, why are makers of blindness products not taking advantage of this technology?
CHeers Heather
----- Original Message -----
Sent: Friday, August 7, 2020 1:05 AM
Subject: Re: [TechTalk] 3d printing

I found a couple of models of things like dice and signature guides on  https://www.thingiverse.com/ but I thought there would be more of a community somewhere.  Maybe there is and I just haven't found it yet, but the response I've got to this message and on twitter etc, indicates that if there is, it mustn't be widely known about...



On Fri, Aug 7, 2020 at 2:02 PM Cristóbal <cristobalmuli@...> wrote:

When 3D printing was having its moment and really coming into the mainstream a few years ago, I really thought there’d be more enthusiasm for it in the blind community. Imagine all the possibilities. 3D printed maps accurately depicting mountain ranges and terrain. All sorts of objects. I for one whenever I travel, make it a point to snatch up all the cheesy miniatures of all the landmarks I visit, but imagine all the structures and layouts for recreation education and mobility you can think of printing to get a better idea of how things and places are shaped. Alas, cant’ say I know of too many places or companies that delved into this.

It could just be me too. Maybe I’m just not aware of it. I for one wouldn’t mind getting my hands on some of these things.

 

 

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Quentin Christensen
Sent: Wednesday, August 5, 2020 10:44 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] 3d printing

 

Thanks Sharon!

 

I figure there are things I can think of - such as guides, small tactile objects and so on, but I'm sure there are plenty more things I haven't even thought of, and others interested in the same thing (either people who are blind or have low vision, family members or people in the industry for their clients).

 

Quentin.

 

On Wed, Aug 5, 2020 at 10:31 PM Sharon Hooley <shooley42@...> wrote:

There was a zoom meeting on Open Scad coding, but I didn't see an invitation.  It was with the National Federation of the Blind.  I'll ask your question on their crafters list.

 

 

On 8/5/2020 1:30 AM, Quentin Christensen wrote:

Hi everyone,

 

This is a personal question, I'm considering getting a 3d printer, and was wondering whether there were any resources available on using these as accessibility tools? For instance, I have found 3d files to print tactile dice or signature guides with them, and was interested in exploring what else can be done in that regard. Are there any mailing lists, web pages, facebook groups etc dedicated to this aspect of 3d printing that anyone is aware of please?  

 

Bonus points of course, for something which works with NVDA :)

 

Kind regards

 

Quentin.

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 



--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Re: W10 version

Doug Sloan
 

Great thanks

 

From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Sam Taylor
Sent: Monday, 10 August 2020 3:11 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] W10 version

 

Hi Doug,

Press windows and r for the run dialogue and type winver

then press enter and read the dialog with insert b.

 

 

On 10/08/2020 3:00 pm, Doug Sloan wrote:

Hi all

 

How can I check what version of W10 I’m currently running?

 


Re: W10 version

Monte Single
 

Hold down the win key and press the letter r,

Type;

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

‘winver” without the quotes.

Press enter.

Use your screen reader keys to hear the result.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Doug Sloan
Sent: August 9, 2020 11:01 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] W10 version

 

Hi all

 

How can I check what version of W10 I’m currently running?

 


Re: W10 version

Sam Taylor
 

Hi Doug,

Press windows and r for the run dialogue and type winver

then press enter and read the dialog with insert b.



On 10/08/2020 3:00 pm, Doug Sloan wrote:

Hi all

 

How can I check what version of W10 I’m currently running?

 


W10 version

Doug Sloan
 

Hi all

 

How can I check what version of W10 I’m currently running?

 


need talking win 8.1 pe

Marvin Hunkin
 

Hi. Need the talking win pe 8.1. as did have the win 7 64 bit, and when I then tried to install win 8.1, said it was icompattible and would not install the setup.exe. does any one have this or where to find it, where I can download.

As need to use win 8, and then do a incline to upgrade to win 8.1. unless have to research how to do a incline upgrade to win 10.

Can any one help.

Thanks.

 


Re: 3d printing

Monte Single
 

A few years ago there was some buzz about a boy who was building a braille embosser  with lego parts;  I thing he even got some funding from m s.

Another great idea that has not materialized.

I know I wondering off topic.

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Quentin Christensen
Sent: August 9, 2020 9:02 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] 3d printing

 

I don't have an answer Heather, but I wonder if there are at least several factors involved:

 

1) Complexity: A Braille display has a lot of moving parts - each Braille cell needs six (often 8) moving individual pins, plus the frame, plus whatever holds them plus the circuitry to run it.  So even a 14 cell Braille display would need 112 pieces printed individually just for the pins.  You could probably setup and print a "Sheet" of them that you then snap off, much like the little plastic pieces you get in a model kit, but even so, putting them together is going to be fiddly.

 

Assuming you overcome that, you also need someone to make those models in the first place.  For many companies, by the time they have invested the R&D into that, they're probably going to think it is more worth their while simply employing a factory to make the units, and sell them with such a markup that they recoup their costs.  If they distributed 3D files for you to print yourself, A) they'd need to sell a lot to cover the cost, b) Who would be responsible for faults? and c) Unless they made them very cheap (see point a)) they'd likely find the files were readily pirated and shared between people, with no revenue then going back to them.

 

That's all pure speculation off the top of my head, I really haven't looked into it.  I expect the complexity would be a big issue.  A 3d Printed Braille stylus I expect wouldn't be that hard to make (if someone hasn't already) as would be something like a signature guide. But many of the 3d models I've seen, particularly at the consumer end of the scale, tend to be things which can be printed in one or at least a small number of pieces.

 

But I am definitely surprised there doesn't seem to be more out there.

 

Actually just looking, here is an article from 2016 on a 3d printed refreshable Braille display which aimed to be a low cost device: https://www.3ders.org/articles/20160508-low-cost-3d-printed-braille-reader-aims-to-increase-literacy-rates-for-the-blind.html

 

There might be more out there!

 

Quentin.

 

On Sat, Aug 8, 2020 at 2:57 AM heather albright <kd5cbl@...> wrote:

I was thinking now, we can just 3d print our parts  to make our braille displays so they would be cheaper; the embossers would be cheaper; electric braille labeler makers would be cheaper etc. It has not happened this way, wonder why? So is the cost of 3d printing off set the cost of making these items or has 3d printing not cost effective enough to make these items? I read about people being able to 3d print houses which is much larger than say a braille display or embosser so, why are makers of blindness products not taking advantage of this technology?

CHeers Heather

----- Original Message -----

Sent: Friday, August 7, 2020 1:05 AM

Subject: Re: [TechTalk] 3d printing

 

I found a couple of models of things like dice and signature guides on  https://www.thingiverse.com/ but I thought there would be more of a community somewhere.  Maybe there is and I just haven't found it yet, but the response I've got to this message and on twitter etc, indicates that if there is, it mustn't be widely known about...

 

 

 

On Fri, Aug 7, 2020 at 2:02 PM Cristóbal <cristobalmuli@...> wrote:

When 3D printing was having its moment and really coming into the mainstream a few years ago, I really thought there’d be more enthusiasm for it in the blind community. Imagine all the possibilities. 3D printed maps accurately depicting mountain ranges and terrain. All sorts of objects. I for one whenever I travel, make it a point to snatch up all the cheesy miniatures of all the landmarks I visit, but imagine all the structures and layouts for recreation education and mobility you can think of printing to get a better idea of how things and places are shaped. Alas, cant’ say I know of too many places or companies that delved into this.

It could just be me too. Maybe I’m just not aware of it. I for one wouldn’t mind getting my hands on some of these things.

 

 

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Quentin Christensen
Sent: Wednesday, August 5, 2020 10:44 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] 3d printing

 

Thanks Sharon!

 

I figure there are things I can think of - such as guides, small tactile objects and so on, but I'm sure there are plenty more things I haven't even thought of, and others interested in the same thing (either people who are blind or have low vision, family members or people in the industry for their clients).

 

Quentin.

 

On Wed, Aug 5, 2020 at 10:31 PM Sharon Hooley <shooley42@...> wrote:

There was a zoom meeting on Open Scad coding, but I didn't see an invitation.  It was with the National Federation of the Blind.  I'll ask your question on their crafters list.

 

 

On 8/5/2020 1:30 AM, Quentin Christensen wrote:

Hi everyone,

 

This is a personal question, I'm considering getting a 3d printer, and was wondering whether there were any resources available on using these as accessibility tools? For instance, I have found 3d files to print tactile dice or signature guides with them, and was interested in exploring what else can be done in that regard. Are there any mailing lists, web pages, facebook groups etc dedicated to this aspect of 3d printing that anyone is aware of please?  

 

Bonus points of course, for something which works with NVDA :)

 

Kind regards

 

Quentin.

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 


Re: 3d printing

Quentin Christensen
 

I don't have an answer Heather, but I wonder if there are at least several factors involved:

1) Complexity: A Braille display has a lot of moving parts - each Braille cell needs six (often 8) moving individual pins, plus the frame, plus whatever holds them plus the circuitry to run it.  So even a 14 cell Braille display would need 112 pieces printed individually just for the pins.  You could probably setup and print a "Sheet" of them that you then snap off, much like the little plastic pieces you get in a model kit, but even so, putting them together is going to be fiddly.

Assuming you overcome that, you also need someone to make those models in the first place.  For many companies, by the time they have invested the R&D into that, they're probably going to think it is more worth their while simply employing a factory to make the units, and sell them with such a markup that they recoup their costs.  If they distributed 3D files for you to print yourself, A) they'd need to sell a lot to cover the cost, b) Who would be responsible for faults? and c) Unless they made them very cheap (see point a)) they'd likely find the files were readily pirated and shared between people, with no revenue then going back to them.

That's all pure speculation off the top of my head, I really haven't looked into it.  I expect the complexity would be a big issue.  A 3d Printed Braille stylus I expect wouldn't be that hard to make (if someone hasn't already) as would be something like a signature guide. But many of the 3d models I've seen, particularly at the consumer end of the scale, tend to be things which can be printed in one or at least a small number of pieces.

But I am definitely surprised there doesn't seem to be more out there.

Actually just looking, here is an article from 2016 on a 3d printed refreshable Braille display which aimed to be a low cost device: https://www.3ders.org/articles/20160508-low-cost-3d-printed-braille-reader-aims-to-increase-literacy-rates-for-the-blind.html

There might be more out there!

Quentin.

On Sat, Aug 8, 2020 at 2:57 AM heather albright <kd5cbl@...> wrote:
I was thinking now, we can just 3d print our parts  to make our braille displays so they would be cheaper; the embossers would be cheaper; electric braille labeler makers would be cheaper etc. It has not happened this way, wonder why? So is the cost of 3d printing off set the cost of making these items or has 3d printing not cost effective enough to make these items? I read about people being able to 3d print houses which is much larger than say a braille display or embosser so, why are makers of blindness products not taking advantage of this technology?
CHeers Heather
----- Original Message -----
Sent: Friday, August 7, 2020 1:05 AM
Subject: Re: [TechTalk] 3d printing

I found a couple of models of things like dice and signature guides on  https://www.thingiverse.com/ but I thought there would be more of a community somewhere.  Maybe there is and I just haven't found it yet, but the response I've got to this message and on twitter etc, indicates that if there is, it mustn't be widely known about...



On Fri, Aug 7, 2020 at 2:02 PM Cristóbal <cristobalmuli@...> wrote:

When 3D printing was having its moment and really coming into the mainstream a few years ago, I really thought there’d be more enthusiasm for it in the blind community. Imagine all the possibilities. 3D printed maps accurately depicting mountain ranges and terrain. All sorts of objects. I for one whenever I travel, make it a point to snatch up all the cheesy miniatures of all the landmarks I visit, but imagine all the structures and layouts for recreation education and mobility you can think of printing to get a better idea of how things and places are shaped. Alas, cant’ say I know of too many places or companies that delved into this.

It could just be me too. Maybe I’m just not aware of it. I for one wouldn’t mind getting my hands on some of these things.

 

 

Cristóbal

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Quentin Christensen
Sent: Wednesday, August 5, 2020 10:44 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] 3d printing

 

Thanks Sharon!

 

I figure there are things I can think of - such as guides, small tactile objects and so on, but I'm sure there are plenty more things I haven't even thought of, and others interested in the same thing (either people who are blind or have low vision, family members or people in the industry for their clients).

 

Quentin.

 

On Wed, Aug 5, 2020 at 10:31 PM Sharon Hooley <shooley42@...> wrote:

There was a zoom meeting on Open Scad coding, but I didn't see an invitation.  It was with the National Federation of the Blind.  I'll ask your question on their crafters list.

 

 

On 8/5/2020 1:30 AM, Quentin Christensen wrote:

Hi everyone,

 

This is a personal question, I'm considering getting a 3d printer, and was wondering whether there were any resources available on using these as accessibility tools? For instance, I have found 3d files to print tactile dice or signature guides with them, and was interested in exploring what else can be done in that regard. Are there any mailing lists, web pages, facebook groups etc dedicated to this aspect of 3d printing that anyone is aware of please?  

 

Bonus points of course, for something which works with NVDA :)

 

Kind regards

 

Quentin.

--

Quentin Christensen
Training and Support Manager

 


 

--

Quentin Christensen
Training and Support Manager

 



--
Quentin Christensen
Training and Support Manager



--
Quentin Christensen
Training and Support Manager


Re: Can one reset pc USB ports

Mike B
 

You would have to delete the USB port drivers and reboot the computer so they reinstall.  If you do this don't have anything plugged into the USB ports if possible.  Do a search for steps for your operating system.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Fanus
Sent: Sunday, August 09, 2020 6:59 AM
Subject: [TechTalk] Can one reset pc USB ports

Hello list
More and more I get an error "the last USB device has malfunctioned" when
plugging a device into a USB port. For example: on Friday 1 august I made a
backup of my hard drive to an external drive with Casper software. Yesterday
when I inserted the same cable into the same USB port I got that message. As
stated above this happens more and more.
Regards
Fanus