Date   

Re: Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play

Ron Canazzi
 

Hi Group,

I wonder if this Game Day Pro NFL is using listings from Free Football Radio: http://freefootballradio.com?  In fact, using that site and searching for the stations using the Victor Reader Stream Second Generation, I was able to find multiple reliable feeds for many NFL teams last year.  You can also use the team sites to find out current listings of stations and search for them individually and maybe get lucky and find an active feed which apparently violates the exclusive content of NFL for some reason.

Trying the same approach with Major League Baseball does not work. I have only been able to find two stations violating their exclusive content rules over the past several years.

On 9/11/2020 11:45 AM, Michael Mote wrote:
I did the same thing, and most of the feeds do indeed work. Occasionally, they do not. I wonder what this year will be like, considering some of the radio stations now are carrying baseball games on their regular feeds. Stations like WTAM for the Indians, and KLAB for the Dodgers. I don't know if it is every game, but they have been on from time to time.


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of wendy Sheld-Walker
Sent: Friday, September 11, 2020 11:32 AM
To: main@techtalk.groups.io
Cc: TechTalk Mailing List <TechTalk@groups.io>
Subject: Re: [TechTalk] Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play


I listen to last nights game on an app called GameDay pro NFL and it cost $1.99. It has several different feeds for each team in case one does not work but last nights game worked just fine on the Kansas City feed.


On Sep 11, 2020, at 10:10 AM, Ron Canazzi <aa2vm@roadrunner.com> wrote:

Hi Group,

This is a long post. If you aren't interested in NFL play-by-play broadcast, you might stop reading now.

On this and a few other lists, I initiated a discussion about how to best receive NFL radio play-by-play broadcasts of the games now that Tune In Premium had dropped the NFL and MLB broadcasts. As far as MLB, there is an iPhone app as well as a website interface. Both are very accessible and the $20 US yearly for the service for both the app and the website is very affordable.

As concerns the NFL play-by-play, the two choices are SiriusXM and the NFL site and app.

I had gotten several conflicting bits of information concerning the availability of NFL play-by-play for the SiriusXM service. Here is the definitive answer. You _MUST_ have a radio to receive NFL, NBA and MLB play-by-play broadcasts. I know this because yesterday, I signed up for the service and found out that the NFL game last night and the NFL listing for play-by-play did not exist on the online streaming service. When I signed up, I specifically asked if these play-by-play services were available. I was told by SiriusXM tech support that they were. When I found out last night that they were not, I called up this morning for a clarification and was definitively told that the services for NFL, NBA and MLB play-by-play were available only to those who owned radios. So that settles that issue once and for all. When I told SiriusXM support of the bad information I got yesterday, they were quite good about it and refunded my first month fees and cancelled my account.

Now for the NFL app. Let me say first off that the app is clumsy. There are a bunch of buttons that show up as unpronounceable for VoiceOver on the iPhone app. Experimentation has shown that the most important unlabeled button is the second from the top on the main screen and the Game Pass screen. This button is the settings button. VoiceOver has an ability to label unlabeled buttons, but that's one feature I haven't mastered at this time. There are a bunch of other unlabeled buttons that I haven't figured out yet.

However, the biggest issue with this app is not so much some of those buttons, but it is the way NFL handles the games. I experimented with this app for two days before the Thursday night game and they had only the remnant of the Super Bowl archives from last February listed under the Game Pass main screen. There is a year/week/day picker in the app which takes a bit of getting used to. When you first open it by double tapping on it, about fifty percent of the time, you get bounced to the status bar and have to navigate back to the picker. But what bothered me most was that the screen for current games stay locked in last February until 8:20 PM last night. At precisely that time, the app switched to the year 2020 and the current year appeared in the year/week/day picker and then and only then could you access the feed for both Houston and Kansas City. Once these feeds are available, you could double tap on the appropriate feed for home and away. The team names are clearly labeled so that is no problem.

What did happen is that for about the first five minutes, the games would not play and the TV feed which is not supposed to be available until immediately after the game has been completed actually played. Then it disappeared and the radio feeds became available. I assume this was a glitch on the part of the NFL itself and nothing to do specifically with the app. Maybe they'll do a better job on Sunday--having had these issues for the opening game.

As far as the website, each of these year/week/day time pickers is represented by a Tab. You press enter on the appropriate tab and then a drop down menu appears so you can highlight it and press enter again to expose the game/s for that day.

All in all, as clumsy as it is, it is usable and is you don't want to buy a radio, it is the only alternative for now--other than hunting down team network affiliates that may stream the games. Indeed there are a bunch of them that have done that in the past. The site Free Football Radio<http://www.freefootballradio.com> lists the affiliates of all 32 NFL teams and while they don't regularly update this list, many of the entries are valid enough. You can also go the the individual team website where the current list of affiliates is usually listed.

So there you have it: the major alternatives to the now defunct Tune In Premium NFL play-by-play broadcasts. The NFL site and app is a bit pricey at $100 yearly, but I suppose if you have sighted associates or family members, it might be worth it after all.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"






--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: how to get rid of page breaks in note pad

Gene
 

It appears the person who asked the original question is using NVDA. JAWS doesn't announce the page break carachter when it encounters it.

I assume, and it’s a good assumption, but the person may correct me if I'm wrong, that the person is hearing the words page break being spoken, not the characters you are citing. She asks how to remove page breaks and I doubt she would say that if she heard the code spoken as carret m.

But the carachter being discussed isn't the carachter you are discussing. If it were, NVDA would say page break just as it does when it encounters whatever is being used.

I don't know what the carachter is. The carachter you are referencing may be used as a page break character but I don't know which programs do so or under what circumstances.

Gene

-----Original Message-----
From: Mike B
Sent: Friday, September 11, 2020 6:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


That's what it's supposed to say. The, ^m, is what Windows uses to replace or remove the page break symbol. The only way to know if it works or not is to use the steps in a file that has page breaks in it. Here are other symbols that are used in the Find & Replace feature.


Paragraph Mark, ^p
Tab Character, ^t
Any Character, ^c
Any Digit, ^g
Any Letter, ^y
Caret Character, ^r
§ Section Character, ^a
¶ Paragraph Character, ^a
Column Break, ^u
Em Dash, ^m
En Dash, ^n
Endnote Mark, ^e
Field, ^d
Footnote Mark, ^f
Graphic, ^i
Manual Line Break, ^l
Manual Page Break, ^k
Nonbreaking Hyphen, ^h
Nonbreaking Space, ^s
Optional Hyphen, ^o
Section Break, ^b
White Space, ^w
Take care.
Mike
Global warming? Most likely caused from hot air generated by politicians!


Take care. Mike. Sent from my iBarstool. Go dodgers!
----- Original Message -----
From: Gene
To: main@TechTalk.groups.io
Sent: Friday, September 11, 2020 3:55 PM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad

I doubt that is the same symbol as whatever put the page breaks into the
document uses. I tried placing the symbol in a document in Notepad and NVDA
didn't say page break when it read the symbol. It said carret m.

Also, when I work with the symbol, as far as I can tell, it takes one space.

Gene

-----Original Message-----
From: Mike B
Sent: Friday, September 11, 2020 2:46 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Hi Heather,

These are steps for Word, but give them a try in Notepad to see how it goes.

You might consider using the "Find and Replace" dialog box to remove all
manual page breaks.

1. Use CTRL+H to move focus into the Replace page of the dialog box.
2. In the Find What edit box type a caret followed by a small m. (The
caret is a shift on the number 6 and be sure not to capitalize the m).
3. Tab to the replace edit box but just leave it blank if you don't want to
replace the manual page breaks with anything else.
4. If you want to keep any of the manual page breaks then tab to the
Replace button and use spacebar. You can then use the Next button to move
to the manual page breaks and remove one at a time. Otherwise, tab to the
Replace all button and use spacebar.
5. Word will let you know how many manual page breaks it removed and you
can press spacebar on the OK button.

Take care. Mike. Sent from my iBarstool. Go dodgers!
----- Original Message -----
From: heather albright
To: main@TechTalk.groups.io
Sent: Friday, September 11, 2020 11:14 AM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Thank you, I do not have a symbol before the page break, unless, it is the
space before the page break. Is that what your talking about? Thank you,
Heather



Sent from Mail for Windows 10





From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad





I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored. I

have to place it in the temporary dicgtionary. Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary. I've tried just selecting it and copying it to the

clipboard. It doesn't work. You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space. Tab to and

activate the ok button, then tab to and activate the next ok button. You

have solved the problem for this session of NVDA.



I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken. You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.



Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad







Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,



Heather







Sent from Mail for Windows 10


Re: how to get rid of page breaks in note pad

Mike B.
 


That's what it's supposed to say.  The, ^m, is what Windows uses to replace or remove the page break symbol.  The only way to know if it works or not is to use the steps in a file that has page breaks in it.  Here are other symbols that are used in the Find & Replace feature.
 
 
Paragraph Mark, ^p
Tab Character, ^t
Any Character, ^c
Any Digit, ^g
Any Letter, ^y
Caret Character, ^r
§ Section Character, ^a
¶ Paragraph Character, ^a
Column Break, ^u
Em Dash, ^m
En Dash, ^n
Endnote Mark, ^e
Field, ^d
Footnote Mark, ^f
Graphic, ^i
Manual Line Break, ^l
Manual Page Break, ^k
Nonbreaking Hyphen, ^h
Nonbreaking Space, ^s
Optional Hyphen, ^o
Section Break, ^b
White Space, ^w
Take care.
Mike
Global warming?  Most likely caused from hot air generated by politicians!

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Gene
Sent: Friday, September 11, 2020 3:55 PM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad

I doubt that is the same symbol as whatever put the page breaks into the
document uses.  I tried placing the symbol in a document in Notepad and NVDA
didn't say page break when it read the symbol.  It said carret m.

Also, when I work with the symbol, as far as I can tell, it takes one space.

Gene

-----Original Message-----
From: Mike B
Sent: Friday, September 11, 2020 2:46 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Hi Heather,

These are steps for Word, but give them a try in Notepad to see how it goes.

You might consider using the "Find and Replace" dialog box to remove all
manual page breaks.

1.  Use CTRL+H to move focus into the Replace page of the dialog box.
2.  In the Find What edit box type a caret followed by a small m.  (The
caret is a shift on the number 6 and be sure not to capitalize the m).
3.  Tab to the replace edit box but just leave it blank if you don't want to
replace the manual page breaks with anything else.
4.  If you want to keep any of the manual page breaks then tab to the
Replace button and use spacebar.  You can then use the Next button to move
to the manual page breaks and remove one at a time.  Otherwise, tab to the
Replace all button and use spacebar.
5.  Word will let you know how many manual page breaks it removed and you
can press spacebar on the OK button.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!
----- Original Message -----
From: heather albright
To: main@TechTalk.groups.io
Sent: Friday, September 11, 2020 11:14 AM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Thank you, I do not have a symbol before the page break, unless, it is the
space before the page break. Is that what  your talking about? Thank you,
Heather



Sent from Mail for Windows 10





From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad





I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored.  I

have to place it in the temporary dicgtionary.  Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary.  I've tried just selecting it and copying it to the

clipboard.  It doesn't work.  You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space.  Tab to and

activate the ok button, then tab to and activate the next ok button.  You

have solved the problem for this session of NVDA.



I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken.  You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.



Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad







Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,



Heather







Sent from Mail for Windows 10



















 




Re: how to get rid of page breaks in note pad

Gene
 

I doubt that is the same symbol as whatever put the page breaks into the document uses. I tried placing the symbol in a document in Notepad and NVDA didn't say page break when it read the symbol. It said carret m.

Also, when I work with the symbol, as far as I can tell, it takes one space.

Gene

-----Original Message-----
From: Mike B
Sent: Friday, September 11, 2020 2:46 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Hi Heather,

These are steps for Word, but give them a try in Notepad to see how it goes.

You might consider using the "Find and Replace" dialog box to remove all manual page breaks.

1. Use CTRL+H to move focus into the Replace page of the dialog box.
2. In the Find What edit box type a caret followed by a small m. (The
caret is a shift on the number 6 and be sure not to capitalize the m).
3. Tab to the replace edit box but just leave it blank if you don't want to
replace the manual page breaks with anything else.
4. If you want to keep any of the manual page breaks then tab to the
Replace button and use spacebar. You can then use the Next button to move
to the manual page breaks and remove one at a time. Otherwise, tab to the
Replace all button and use spacebar.
5. Word will let you know how many manual page breaks it removed and you can press spacebar on the OK button.

Take care. Mike. Sent from my iBarstool. Go dodgers!
----- Original Message -----
From: heather albright
To: main@TechTalk.groups.io
Sent: Friday, September 11, 2020 11:14 AM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad


Thank you, I do not have a symbol before the page break, unless, it is the space before the page break. Is that what your talking about? Thank you, Heather



Sent from Mail for Windows 10





From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad





I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored. I

have to place it in the temporary dicgtionary. Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary. I've tried just selecting it and copying it to the

clipboard. It doesn't work. You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space. Tab to and

activate the ok button, then tab to and activate the next ok button. You

have solved the problem for this session of NVDA.



I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken. You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.



Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad







Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,



Heather







Sent from Mail for Windows 10


Re: Dropbox and pCloud

George McCoy
 

Fwiw, When I click on Dropbox in my system tray, the context menu speaks just as it has always done.


George

On 9/10/2020 2:56 PM, Joe Orozco wrote:
Thanks to David for vouching for pCloud.

As for Dropbox, if you click on it from the system tray, there's
silence. You might be able to tab around and eventually get it to tell
you to press Enter to open Dropbox, but it's hit or miss. Even once
you succeed at opening the right window, it seems more difficult to
find Preferences. I generally like Dropbox, but its attention to
accessibility when it comes to Windows leaves something to be desired.
So far on iOS it seems fine.

Joe


On 9/10/20, Gene <gsasner@gmail.com> wrote:
How has the system tray interface gotten worse? I don't use it much but
with NVDA, the part I look at looks the same and when I look at preferences,

it looks as it used to.

Gene
-----Original Message-----
From: Joe Orozco
Sent: Thursday, September 10, 2020 12:42 PM
To: main@techtalk.groups.io
Subject: [TechTalk] Dropbox and pCloud

Hello,

Does anyone know if there are JAWS scripts for Dropbox? The website
accessibility has grown increasingly bad, and even the desktop app
seems to have gotten worse in terms of simple things like checking
free space and adjusting sync settings.

Also, does anyone have experience with pCloud? I'm testing out the app
now before deciding whether or not to buy into their lifetime plan.
Some of the features are not accessible, like adding passwords and
expiration dates to shared links, but this could be a matter of
finding the right workaround. I would be curious to hear other
people's impressions of the cloud storage service.

Thank you kindly in advance,

Joe







signing up for amazon prime

Troy Burnham
 

Hi all,

I have the 30-day trial of amazon prime for now, and I know that normally after the 30 days that I'd automatically be charged but I called and asked for that not to happen right after I got the trial a couple of weeks ago. I decided that I do want to keep prime though, so I called the amazon disability line and was sent a link to amazon.com/prime but I don't see anywhere on there to sign up. Unless I have to wait for the trial to run out before I can sign up can anybody tell me what to do to sign up? Btw I want to pay monthly.

Thanks.

Troy


Re: how to get rid of page breaks in note pad

Mike B.
 


Hi Heather,
 
These are steps for Word, but give them a try in Notepad to see how it goes.
 
You might consider using the "Find and Replace" dialog box to remove all manual page breaks. 
 
1.  Use CTRL+H to move focus into the Replace page of the dialog box.
2.  In the Find What edit box type a caret followed by a small m.  (The
caret is a shift on the number 6 and be sure not to capitalize the m). 
3.  Tab to the replace edit box but just leave it blank if you don't want to
replace the manual page breaks with anything else.
4.  If you want to keep any of the manual page breaks then tab to the
Replace button and use spacebar.  You can then use the Next button to move
to the manual page breaks and remove one at a time.  Otherwise, tab to the
Replace all button and use spacebar. 
5.  Word will let you know how many manual page breaks it removed and you can press spacebar on the OK button.

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!

----- Original Message -----
Sent: Friday, September 11, 2020 11:14 AM
Subject: Re: [TechTalk] how to get rid of page breaks in note pad

Thank you, I do not have a symbol before the page break, unless, it is the space before the page break. Is that what  your talking about? Thank you, Heather

 

Sent from Mail for Windows 10

 

From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad

 

I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored.  I

have to place it in the temporary dicgtionary.  Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary.  I've tried just selecting it and copying it to the

clipboard.  It doesn't work.  You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space.  Tab to and

activate the ok button, then tab to and activate the next ok button.  You

have solved the problem for this session of NVDA.

 

I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken.  You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.

 

Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad

 

 

 

Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,

 

Heather

 

 

 

Sent from Mail for Windows 10

 

 

 

 

 

 

 


Re: how to get rid of page breaks in note pad

Gene
 

Anything will do but I'm saying that if there is a space, you can copy both the space and the page break to the clipboard. Then after you paste the space and page break to the pattern field, remove gthe space.

Gene

-----Original Message-----
From: heather albright
Sent: Friday, September 11, 2020 1:14 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad



Thank you, I do not have a symbol before the page break, unless, it is the space before the page break. Is that what your talking about? Thank you, Heather



Sent from Mail for Windows 10





From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad





I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored. I

have to place it in the temporary dicgtionary. Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary. I've tried just selecting it and copying it to the

clipboard. It doesn't work. You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space. Tab to and

activate the ok button, then tab to and activate the next ok button. You

have solved the problem for this session of NVDA.



I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken. You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.



Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad







Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,



Heather







Sent from Mail for Windows 10


Re: how to get rid of page breaks in note pad

heather albright
 

Thank you, I do not have a symbol before the page break, unless, it is the space before the page break. Is that what  your talking about? Thank you, Heather

 

Sent from Mail for Windows 10

 

From: Gene
Sent: Friday, September 11, 2020 12:52 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] how to get rid of page breaks in note pad

 

I'm not sure how it might be done other than the method I'll present here.

This is a symbol and for some reason, I find that I can't add it to the

default speech dictionary or the voice dictionary and have it honored.  I

have to place it in the temporary dicgtionary.  Perhaps others will have

other experiences.

First, you have to get the symbol in a syntax that it can be pasted to the

temporary dictionary.  I've tried just selecting it and copying it to the

clipboard.  It doesn't work.  You have to select something right next to it,

such as a space and select the symbol and copy both to the clipboard.

Then, when you paste what you copied into the pattern field, remove the

additional carachter after pasting.

Then tab once to the pronounced as field and type a space.  Tab to and

activate the ok button, then tab to and activate the next ok button.  You

have solved the problem for this session of NVDA.

 

I wish I knew a permanent solution but at least when I've tried this, I have

to go through this procedure every time I run NVDA that I want the symbol

not to be spoken.  You may be able to remove the page breaks using search

and replace but I haven't played with that to any extent.

 

Gene

-----Original Message-----

From: heather albright

Sent: Friday, September 11, 2020 12:39 PM

To: TechTalk@groups.io

Subject: [TechTalk] how to get rid of page breaks in note pad

 

 

 

Hello, I wante to get rid of my NVDA from announcing page breaks with

notepad. So what is the best way, if anyone knows how to do this, please

send the sequence commands. I do not like page breaks to be announced when

reading books. Thank you,

 

Heather

 

 

 

Sent from Mail for Windows 10

 

 

 

 

 

 

 


Re: Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play

Lynette
 

I just find the radio stations which broadcast the games I wish to enjoy and get them on either the Victor Stream or on my IPhone. This is just the old fashioned normal radios and it works great and for free!
Lynette

-----Original Message-----
From: Ron Canazzi
Sent: Friday, September 11, 2020 8:10 AM
To: TechTalk Mailing List
Subject: [TechTalk] Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play

Hi Group,

This is a long post. If you aren't interested in NFL play-by-play
broadcast, you might stop reading now.

On this and a few other lists, I initiated a discussion about how to
best receive NFL radio play-by-play broadcasts of the games now that
Tune In Premium had dropped the NFL and MLB broadcasts. As far as MLB,
there is an iPhone app as well as a website interface. Both are very
accessible and the $20 US yearly for the service for both the app and
the website is very affordable.

As concerns the NFL play-by-play, the two choices are SiriusXM and the
NFL site and app.

I had gotten several conflicting bits of information concerning the
availability of NFL play-by-play for the SiriusXM service. Here is the
definitive answer. You _MUST_ have a radio to receive NFL, NBA and MLB
play-by-play broadcasts. I know this because yesterday, I signed up for
the service and found out that the NFL game last night and the NFL
listing for play-by-play did not exist on the online streaming service.
When I signed up, I specifically asked if these play-by-play services
were available. I was told by SiriusXM tech support that they were.
When I found out last night that they were not, I called up this morning
for a clarification and was definitively told that the services for NFL,
NBA and MLB play-by-play were available only to those who owned radios.
So that settles that issue once and for all. When I told SiriusXM
support of the bad information I got yesterday, they were quite good
about it and refunded my first month fees and cancelled my account.

Now for the NFL app. Let me say first off that the app is clumsy. There
are a bunch of buttons that show up as unpronounceable for VoiceOver on
the iPhone app. Experimentation has shown that the most important
unlabeled button is the second from the top on the main screen and the
Game Pass screen. This button is the settings button. VoiceOver has an
ability to label unlabeled buttons, but that's one feature I haven't
mastered at this time. There are a bunch of other unlabeled buttons
that I haven't figured out yet.

However, the biggest issue with this app is not so much some of those
buttons, but it is the way NFL handles the games. I experimented with
this app for two days before the Thursday night game and they had only
the remnant of the Super Bowl archives from last February listed under
the Game Pass main screen. There is a year/week/day picker in the app
which takes a bit of getting used to. When you first open it by double
tapping on it, about fifty percent of the time, you get bounced to the
status bar and have to navigate back to the picker. But what bothered
me most was that the screen for current games stay locked in last
February until 8:20 PM last night. At precisely that time, the app
switched to the year 2020 and the current year appeared in the
year/week/day picker and then and only then could you access the feed
for both Houston and Kansas City. Once these feeds are available, you
could double tap on the appropriate feed for home and away. The team
names are clearly labeled so that is no problem.

What did happen is that for about the first five minutes, the games
would not play and the TV feed which is not supposed to be available
until immediately after the game has been completed actually played.
Then it disappeared and the radio feeds became available. I assume this
was a glitch on the part of the NFL itself and nothing to do
specifically with the app. Maybe they'll do a better job on
Sunday--having had these issues for the opening game.

As far as the website, each of these year/week/day time pickers is
represented by a Tab. You press enter on the appropriate tab and then a
drop down menu appears so you can highlight it and press enter again to
expose the game/s for that day.

All in all, as clumsy as it is, it is usable and is you don't want to
buy a radio, it is the only alternative for now--other than hunting down
team network affiliates that may stream the games. Indeed there are a
bunch of them that have done that in the past. The site Free Football
Radio<http://www.freefootballradio.com> lists the affiliates of all 32
NFL teams and while they don't regularly update this list, many of the
entries are valid enough. You can also go the the individual team
website where the current list of affiliates is usually listed.

So there you have it: the major alternatives to the now defunct Tune In
Premium NFL play-by-play broadcasts. The NFL site and app is a bit
pricey at $100 yearly, but I suppose if you have sighted associates or
family members, it might be worth it after all.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: how to get rid of page breaks in note pad

Gene
 

I'm not sure how it might be done other than the method I'll present here.
This is a symbol and for some reason, I find that I can't add it to the default speech dictionary or the voice dictionary and have it honored. I have to place it in the temporary dicgtionary. Perhaps others will have other experiences.
First, you have to get the symbol in a syntax that it can be pasted to the temporary dictionary. I've tried just selecting it and copying it to the clipboard. It doesn't work. You have to select something right next to it, such as a space and select the symbol and copy both to the clipboard.
Then, when you paste what you copied into the pattern field, remove the additional carachter after pasting.
Then tab once to the pronounced as field and type a space. Tab to and activate the ok button, then tab to and activate the next ok button. You have solved the problem for this session of NVDA.

I wish I knew a permanent solution but at least when I've tried this, I have to go through this procedure every time I run NVDA that I want the symbol not to be spoken. You may be able to remove the page breaks using search and replace but I haven't played with that to any extent.

Gene

-----Original Message-----
From: heather albright
Sent: Friday, September 11, 2020 12:39 PM
To: TechTalk@groups.io
Subject: [TechTalk] how to get rid of page breaks in note pad



Hello, I wante to get rid of my NVDA from announcing page breaks with notepad. So what is the best way, if anyone knows how to do this, please send the sequence commands. I do not like page breaks to be announced when reading books. Thank you,

Heather



Sent from Mail for Windows 10


how to get rid of page breaks in note pad

heather albright
 

Hello, I wante to get rid of my NVDA from announcing page breaks with notepad. So what is the best way, if anyone knows how to do this, please send the sequence commands. I do not like page breaks to be announced when reading books. Thank you,

Heather

 

Sent from Mail for Windows 10

 


Re: Dropbox and pCloud

Gene
 

The easiest way to move to the system tray is with the command Windows key b. You can shift tab to it from the desktop as well.

After you issue Windows key b, you can move from item to item with the left and right arrows and you can use first letter navigation.
The keyboard commands for clicking are as follows:
Left double click is enter.
Left single clicck is space bar.
Right click is the context menu key.
In the case of Dropbox, you may be able to use either single left click or double left click. Experimentation will tell you.

You can usually use either the system tray f11 dialog, or you can use the regular system tray, but there are times when one works and the other doesn't.

Gene

-----Original Message-----
From: Joe Orozco
Sent: Friday, September 11, 2020 10:15 AM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Dropbox and pCloud

Yes, I would love help working with the actual system tray and
Dropbox. Thanks much in advance!--Joe

On 9/11/20, Gene <gsasner@gmail.com> wrote:
Do you know how to open and work with the system tray itself? f11 opens a
system tray dialog your screen-reader provides. You aren't working with the

actual system tray itself. You must work with the actual system tray to be

able to open and work with the Dropbox menu.

I'll explain how to work with Dropbox itself if you don't know.

Gene
-----Original Message-----
From: Joe Orozco
Sent: Friday, September 11, 2020 8:02 AM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] Dropbox and pCloud

What's the difference? I use Insert F11. Are you suggesting I use the
task bar instead? I'd never considered this as an option. Thanks for
sharing.

And thank you for the Dropbox scripts!

Joe


On 9/11/20, Smiling? <blind7@sbcglobal.net> wrote:
Custom JAWS Scripts For Dropbox:
https://dlee.org/dropbox/


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Joe
Orozco
Sent: Thursday, September 10, 2020 10:42
To: main@techtalk.groups.io
Subject: [TechTalk] Dropbox and pCloud

Hello,

Does anyone know if there are JAWS scripts for Dropbox? The website
accessibility has grown increasingly bad, and even the desktop app seems
to
have gotten worse in terms of simple things like checking free space and
adjusting sync settings.

Also, does anyone have experience with pCloud? I'm testing out the app
now
before deciding whether or not to buy into their lifetime plan.
Some of the features are not accessible, like adding passwords and
expiration dates to shared links, but this could be a matter of finding
the
right workaround. I would be curious to hear other people's impressions
of
the cloud storage service.

Thank you kindly in advance,

Joe












Re: Turn off Speech in jFW

Mike B.
 

Hi,
 
Here's how to put JAWS into sleep mode for a specific application or program, but I want to warn that you need to be very careful with this, because it can be difficult to undo
this if you make a mistake. This is the type of sleep mode in which JAWS will never speak once a program is loaded.
 
1. Open the program or application for which you want JAWS to be silent during its operation.
 
2. Press JAWS key plus the number six on the numbers row (not the NumPad).
 
3. In the search box which comes up, type the word sleep.
 
4. You will get two results, one applying to braille sleep, the other applies to sleep for JAWS, and it will say it is disabled.
 
5. Press the Space Bar until it says Enabled.
 
6. TAB to OK and press ENTER.
 
Now, whenever you start the program for which you never want JAWS to speak, JAWS will always be silent.
 

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Sharon S
Sent: Friday, September 11, 2020 9:03 AM
Subject: Re: [TechTalk] Turn off Speech in jFW

Hi, also if there is a particular program you don't want jaws to talk in you
can turn speech off for just that program. I have a game I play that has its
own speech so I don't need jaws. Whenever I go into that game I have Jaws
set to not talk but since it is still running if I need to quickly go to
another program on my computer I don't have to start Jaws again. When in the
game as soon as I press alt tab or go to the desktop jaws starts speaking
again but as soon as I alt tab back to my game Jaws goes quiet again.

So if you know you won't need Jaws speaking all the time in one program you
can save time by using this setting. At the moment I'm not totally sure
where the setting is and I am having trouble concentrating because I am
falling to sleep. If people are interested I can dig up my notes in the
morning.

Bye for now.
From Shaz.
Canberra, Australia.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Holly
Sent: Friday, 4 September 2020 9:18 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Turn off Speech in jFW

Rob:

Insert plus space bar then s.






JAWS2021 Beta Report Link

Mike B.
 

Hi All,
 
Below is a note about Jaws2021 Beta tech support and the link to the Beta report page.
 
While in public beta, general technical support of JAWS, ZoomText, or Fusion 2021 is not available using our direct support phone lines or email. However,
you may use normal support lines in order to resolve any problems you experience related to installation or authorization using the Public Beta. For all
other issues you may discover, we ask that you send feedback directly to Freedom Scientific using the
Beta Report Form web page. Please bookmark the report page in your web browser so that you can easily locate it if you need technical assistance. Also, please submit one
problem per report.
 
 
 

Take care.  Mike.  Sent from my iBarstool.  Go dodgers!


Moving folders in Thunderbird 78?

Damien Garwood <damien@...>
 

Hi there,
Is there a way to move folders in Thunderbird? I'm sure there used to be an easy-to-find option to do that in the 60.x (maybe even the 68.x) releases, but I can't seem to find it in 78.
I feel like I'm missing something blatantly obvious here, but I have looked in the context menu of the folder tree, as well as the file, edit and tools menus. I have also tried folder properties and, in a moment of madness, even the rename dialog (given that renaming files is synonymous with moving them on a file system).
Any help appreciated.
Cheers.
Damien.


Re: Turn off Speech in jFW

gbmagoo@...
 

Yes I am interested in doing this please

thanks

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Sharon
S
Sent: Friday, September 11, 2020 09:03
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Turn off Speech in jFW

Hi, also if there is a particular program you don't want jaws to talk in you
can turn speech off for just that program. I have a game I play that has its
own speech so I don't need jaws. Whenever I go into that game I have Jaws
set to not talk but since it is still running if I need to quickly go to
another program on my computer I don't have to start Jaws again. When in the
game as soon as I press alt tab or go to the desktop jaws starts speaking
again but as soon as I alt tab back to my game Jaws goes quiet again.

So if you know you won't need Jaws speaking all the time in one program you
can save time by using this setting. At the moment I'm not totally sure
where the setting is and I am having trouble concentrating because I am
falling to sleep. If people are interested I can dig up my notes in the
morning.

Bye for now.
From Shaz.
Canberra, Australia.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Holly
Sent: Friday, 4 September 2020 9:18 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Turn off Speech in jFW

Rob:

Insert plus space bar then s.


Re: Turn off Speech in jFW

Sharon S
 

Hi, also if there is a particular program you don't want jaws to talk in you
can turn speech off for just that program. I have a game I play that has its
own speech so I don't need jaws. Whenever I go into that game I have Jaws
set to not talk but since it is still running if I need to quickly go to
another program on my computer I don't have to start Jaws again. When in the
game as soon as I press alt tab or go to the desktop jaws starts speaking
again but as soon as I alt tab back to my game Jaws goes quiet again.

So if you know you won't need Jaws speaking all the time in one program you
can save time by using this setting. At the moment I'm not totally sure
where the setting is and I am having trouble concentrating because I am
falling to sleep. If people are interested I can dig up my notes in the
morning.

Bye for now.
From Shaz.
Canberra, Australia.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Holly
Sent: Friday, 4 September 2020 9:18 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Turn off Speech in jFW

Rob:

Insert plus space bar then s.


Re: Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play

Michael Mote
 

I did the same thing, and most of the feeds do indeed work. Occasionally, they do not. I wonder what this year will be like, considering some of the radio stations now are carrying baseball games on their regular feeds. Stations like WTAM for the Indians, and KLAB for the Dodgers. I don't know if it is every game, but they have been on from time to time.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of wendy Sheld-Walker
Sent: Friday, September 11, 2020 11:32 AM
To: main@techtalk.groups.io
Cc: TechTalk Mailing List <TechTalk@groups.io>
Subject: Re: [TechTalk] Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play


I listen to last nights game on an app called GameDay pro NFL and it cost $1.99. It has several different feeds for each team in case one does not work but last nights game worked just fine on the Kansas City feed.


On Sep 11, 2020, at 10:10 AM, Ron Canazzi <aa2vm@roadrunner.com> wrote:

Hi Group,

This is a long post. If you aren't interested in NFL play-by-play broadcast, you might stop reading now.

On this and a few other lists, I initiated a discussion about how to best receive NFL radio play-by-play broadcasts of the games now that Tune In Premium had dropped the NFL and MLB broadcasts. As far as MLB, there is an iPhone app as well as a website interface. Both are very accessible and the $20 US yearly for the service for both the app and the website is very affordable.

As concerns the NFL play-by-play, the two choices are SiriusXM and the NFL site and app.

I had gotten several conflicting bits of information concerning the availability of NFL play-by-play for the SiriusXM service. Here is the definitive answer. You _MUST_ have a radio to receive NFL, NBA and MLB play-by-play broadcasts. I know this because yesterday, I signed up for the service and found out that the NFL game last night and the NFL listing for play-by-play did not exist on the online streaming service. When I signed up, I specifically asked if these play-by-play services were available. I was told by SiriusXM tech support that they were. When I found out last night that they were not, I called up this morning for a clarification and was definitively told that the services for NFL, NBA and MLB play-by-play were available only to those who owned radios. So that settles that issue once and for all. When I told SiriusXM support of the bad information I got yesterday, they were quite good about it and refunded my first month fees and cancelled my account.

Now for the NFL app. Let me say first off that the app is clumsy. There are a bunch of buttons that show up as unpronounceable for VoiceOver on the iPhone app. Experimentation has shown that the most important unlabeled button is the second from the top on the main screen and the Game Pass screen. This button is the settings button. VoiceOver has an ability to label unlabeled buttons, but that's one feature I haven't mastered at this time. There are a bunch of other unlabeled buttons that I haven't figured out yet.

However, the biggest issue with this app is not so much some of those buttons, but it is the way NFL handles the games. I experimented with this app for two days before the Thursday night game and they had only the remnant of the Super Bowl archives from last February listed under the Game Pass main screen. There is a year/week/day picker in the app which takes a bit of getting used to. When you first open it by double tapping on it, about fifty percent of the time, you get bounced to the status bar and have to navigate back to the picker. But what bothered me most was that the screen for current games stay locked in last February until 8:20 PM last night. At precisely that time, the app switched to the year 2020 and the current year appeared in the year/week/day picker and then and only then could you access the feed for both Houston and Kansas City. Once these feeds are available, you could double tap on the appropriate feed for home and away. The team names are clearly labeled so that is no problem.

What did happen is that for about the first five minutes, the games would not play and the TV feed which is not supposed to be available until immediately after the game has been completed actually played. Then it disappeared and the radio feeds became available. I assume this was a glitch on the part of the NFL itself and nothing to do specifically with the app. Maybe they'll do a better job on Sunday--having had these issues for the opening game.

As far as the website, each of these year/week/day time pickers is represented by a Tab. You press enter on the appropriate tab and then a drop down menu appears so you can highlight it and press enter again to expose the game/s for that day.

All in all, as clumsy as it is, it is usable and is you don't want to buy a radio, it is the only alternative for now--other than hunting down team network affiliates that may stream the games. Indeed there are a bunch of them that have done that in the past. The site Free Football Radio<http://www.freefootballradio.com> lists the affiliates of all 32 NFL teams and while they don't regularly update this list, many of the entries are valid enough. You can also go the the individual team website where the current list of affiliates is usually listed.

So there you have it: the major alternatives to the now defunct Tune In Premium NFL play-by-play broadcasts. The NFL site and app is a bit pricey at $100 yearly, but I suppose if you have sighted associates or family members, it might be worth it after all.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"




Re: Definitive Analysis Of SiriusXM and the NFL App For listening to Live NFL Radio Play-By-Play

Wendy Walker
 

I listen to last nights game on an app called GameDay pro NFL and it cost $1.99. It has several different feeds for each team in case one does not work but last nights game worked just fine on the Kansas City feed.

On Sep 11, 2020, at 10:10 AM, Ron Canazzi <aa2vm@roadrunner.com> wrote:

Hi Group,

This is a long post. If you aren't interested in NFL play-by-play broadcast, you might stop reading now.

On this and a few other lists, I initiated a discussion about how to best receive NFL radio play-by-play broadcasts of the games now that Tune In Premium had dropped the NFL and MLB broadcasts. As far as MLB, there is an iPhone app as well as a website interface. Both are very accessible and the $20 US yearly for the service for both the app and the website is very affordable.

As concerns the NFL play-by-play, the two choices are SiriusXM and the NFL site and app.

I had gotten several conflicting bits of information concerning the availability of NFL play-by-play for the SiriusXM service. Here is the definitive answer. You _MUST_ have a radio to receive NFL, NBA and MLB play-by-play broadcasts. I know this because yesterday, I signed up for the service and found out that the NFL game last night and the NFL listing for play-by-play did not exist on the online streaming service. When I signed up, I specifically asked if these play-by-play services were available. I was told by SiriusXM tech support that they were. When I found out last night that they were not, I called up this morning for a clarification and was definitively told that the services for NFL, NBA and MLB play-by-play were available only to those who owned radios. So that settles that issue once and for all. When I told SiriusXM support of the bad information I got yesterday, they were quite good about it and refunded my first month fees and cancelled my account.

Now for the NFL app. Let me say first off that the app is clumsy. There are a bunch of buttons that show up as unpronounceable for VoiceOver on the iPhone app. Experimentation has shown that the most important unlabeled button is the second from the top on the main screen and the Game Pass screen. This button is the settings button. VoiceOver has an ability to label unlabeled buttons, but that's one feature I haven't mastered at this time. There are a bunch of other unlabeled buttons that I haven't figured out yet.

However, the biggest issue with this app is not so much some of those buttons, but it is the way NFL handles the games. I experimented with this app for two days before the Thursday night game and they had only the remnant of the Super Bowl archives from last February listed under the Game Pass main screen. There is a year/week/day picker in the app which takes a bit of getting used to. When you first open it by double tapping on it, about fifty percent of the time, you get bounced to the status bar and have to navigate back to the picker. But what bothered me most was that the screen for current games stay locked in last February until 8:20 PM last night. At precisely that time, the app switched to the year 2020 and the current year appeared in the year/week/day picker and then and only then could you access the feed for both Houston and Kansas City. Once these feeds are available, you could double tap on the appropriate feed for home and away. The team names are clearly labeled so that is no problem.

What did happen is that for about the first five minutes, the games would not play and the TV feed which is not supposed to be available until immediately after the game has been completed actually played. Then it disappeared and the radio feeds became available. I assume this was a glitch on the part of the NFL itself and nothing to do specifically with the app. Maybe they'll do a better job on Sunday--having had these issues for the opening game.

As far as the website, each of these year/week/day time pickers is represented by a Tab. You press enter on the appropriate tab and then a drop down menu appears so you can highlight it and press enter again to expose the game/s for that day.

All in all, as clumsy as it is, it is usable and is you don't want to buy a radio, it is the only alternative for now--other than hunting down team network affiliates that may stream the games. Indeed there are a bunch of them that have done that in the past. The site Free Football Radio<http://www.freefootballradio.com> lists the affiliates of all 32 NFL teams and while they don't regularly update this list, many of the entries are valid enough. You can also go the the individual team website where the current list of affiliates is usually listed.

So there you have it: the major alternatives to the now defunct Tune In Premium NFL play-by-play broadcasts. The NFL site and app is a bit pricey at $100 yearly, but I suppose if you have sighted associates or family members, it might be worth it after all.

--
They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"



9701 - 9720 of 102154