Date   

Re: thunderbird 78.5.1 accessibility configuration

Gene
 

If it helps you understand it, this isn't a mysterious field that is there for some reason. You are really working with the to line. When you first type an address and either tab or press enter, you are placed in the field. You may hear an announcement such as one, left arrow to select. You are still in an edit field where you can type another address, use autocomplete, etc. Add as many addresses as you want. Use autocomplete or type an address, then press enter. Continue until you have added all you want. In other words, for consistency, add the first address and press enter. You can press tab, but it isn't consistent with what you would tend to do and its easier to understanbd what you are doing.
Add first address and press enter. Adde second address, and press enter. Add as many as you like.
At any time after you first press enter, move to the left from the edit field you are in and continue left to hear and move to the addresses you have added.
If you want to add more, right arrow past the first address you addded. You will probably hear edit. That is where you add addresses so do exactly as you did before to add addresses.

Tab to the subject line when you are finished and want to add a subject. You can be in the edit field or on any address and tab, it doesn't matter.

In short, you are working with a variation on the to line.

Gene

-----Original Message-----
From: Shelly Kane
Sent: Tuesday, December 08, 2020 4:19 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] thunderbird 78.5.1 accessibility configuration

Gene:


That's exactly what the field says. I just forgot until you said it.
It would have to show up for me to be able to tell you but I know that's
what it says. So basically, I can do everything I'm doing without using
that field? Is that right? I wouldn't even know what to do with it
when I was there because I already put the address in and I wouldn't
need to do it again there. It just seems pointless to add it.

Shelly

On 12/7/2020 4:23 AM, Gene wrote:
I don't use JAWS. I don't hear control w with NVDA. As far as the extra field, you are evidently seeing a field that shows after you type an address and tab once. If JAWS doesn't read what is said in that field, it is a problem with JAWS. The field says something like one address, left arrow to select. The field is there because you haven't actually placed the address in the field until you tab once. You are now in the field with the address and you can work with it there. When you tab again, you are in the subject line. This won't change. It's just a different way of presenting the to line and having it function slightly differently.than previously.

Gene
-----Original Message----- From: Shelly Kane
Sent: Monday, December 07, 2020 4:07 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] thunderbird 78.5.1 accessibility configuration

Hi Group:


Since I have updated to the new Thunderbird 78.5, it has changed a
little for me. When I go to send an email, there is an extra box before
the subject. I forgot what it says but I just tab to subject and then
it seems to be fine. Is there any way to get rid of this? I have also
noticed when I hit F7 to spell check, when it lands on a word that isn't
spelled right, it will tell me and then it will say control W when I tab
and it never did before. It seems to have these added things that
aren't necessary. Do any of you know if there will be another update to
correct this or are we going to just have to deal with it? Thanks in
advance for any help on this matter. I'm currently using the newest
Jaws which is Jaws 2021.

Shelly

On 12/5/2020 11:14 AM, David Mehler wrote:
Hello,

I just did a Thunderbird upgrade. I'm running v78.5.1 with NVDA
v2020.3. It seems as if this new Thunderbird overwrote my previous
configuration, my accounts are still there but it seems to be bringing
up a lot of extra boxes, adverts, web pages, etc. I was wondering if
anyone had a thunderbird taming setup?

Thanks.
Dave.












.


Re: thunderbird 78.5.1 accessibility configuration

Shelly Kane
 

David:


Thank you for letting me know what all this means.  I am just going to do things the way I have been doing them.  I don't usually send out mass mailings.  It's usually to one person so I won't need this extra field but thanks again for explaining it. As for the Jaws hot keys, I won't be turning that off.  I will just deal with it.  Sometimes, I like that to be announced.  At least I have a better understand of what's going on with the new update.  So glad that I can post on this list and get answers.  I would be lost without it.

Shelly

On 12/7/2020 4:57 AM, David Goldfield wrote:
Shelly,
In Thunderbird when you tab from the to: field you are probably hearing something like
To with one address, use left arrow key to focus on it. Edit
This is somewhat new with Thunderbird and I believe this was introduced with releases starting with version 78.
Essentially, when you hear this you can press left arrow to move to a block of text containing the address that you entered. If you added more than one address pressing left arrow will not move character by character as it usually does but it will move from one email address to the next, similar to how Outlook behaves. Pressing the delete key will remove the address which you are focused on. Pressing enter will allow you to edit that address, allowing left and right arrow keys to move from one character to the next.
The prompt you are hearing in the spell checker which says "alt w" is JAWS reminding you that pressing alt-W moves to the edit field where you can edit the currently suggested word. If this annoys you this prompt can be turned off by going to the JAWS window, opening the Basics menu and setting "speak access keys" to the "off" option. Unfortunately, this is a global setting and doing this means that JAWS would then stop speaking these hotkeys or access keys in all applications, which you may or may not want.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org

On 12/7/2020 5:07 AM, Shelly Kane wrote:
Hi Group:


Since I have updated to the new Thunderbird 78.5, it has changed a little for me.  When I go to send an email, there is an extra box before the subject.  I forgot what it says but I just tab to subject and then it seems to be fine.  Is there any way to get rid of this?  I have also noticed when I hit F7 to spell check, when it lands on a word that isn't spelled right, it will tell me and then it will say control W when I tab and it never did before.  It seems to have these added things that aren't necessary.  Do any of you know if there will be another update to correct this or are we going to just have to deal with it? Thanks in advance for any help on this matter.  I'm currently using the newest Jaws which is Jaws 2021.

Shelly

On 12/5/2020 11:14 AM, David Mehler wrote:
Hello,

I just did a Thunderbird upgrade. I'm running v78.5.1 with NVDA
v2020.3. It seems as if this new Thunderbird overwrote my previous
configuration, my accounts are still there but it seems to be bringing
up a lot of extra boxes, adverts, web pages, etc. I was wondering if
anyone had a thunderbird taming setup?

Thanks.
Dave.











Re: thunderbird 78.5.1 accessibility configuration

Shelly Kane
 

Gene:


That's exactly what the field says.  I just forgot until you said it.  It would have to show up for me to be able to tell you but I know that's what it says.  So basically, I can do everything I'm doing without using that field?  Is that right?  I wouldn't  even know what to do with it when I was there because I already put the address in and I wouldn't need to do it again there.  It just seems pointless to add it.

Shelly

On 12/7/2020 4:23 AM, Gene wrote:
I don't use JAWS.  I don't hear control w with NVDA.  As far as the extra field, you are evidently seeing a field that shows after you type an address and tab once.  If JAWS doesn't read what is said in that field, it is a problem with JAWS.  The field says something like one address, left arrow to select.  The field is there because you haven't actually placed the address in the field until you tab once.  You are now in the field with the address and you can work with it there.  When you tab again, you are in the subject line.  This won't change.  It's just a different way of presenting the to line and having it function slightly differently.than previously.

Gene
-----Original Message----- From: Shelly Kane
Sent: Monday, December 07, 2020 4:07 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] thunderbird 78.5.1 accessibility configuration

Hi Group:


Since I have updated to the new Thunderbird 78.5, it has changed a
little for me.  When I go to send an email, there is an extra box before
the subject.  I forgot what it says but I just tab to subject and then
it seems to be fine.  Is there any way to get rid of this?  I have also
noticed when I hit F7 to spell check, when it lands on a word that isn't
spelled right, it will tell me and then it will say control W when I tab
and it never did before.  It seems to have these added things that
aren't necessary.  Do any of you know if there will be another update to
correct this or are we going to just have to deal with it?  Thanks in
advance for any help on this matter.  I'm currently using the newest
Jaws which is Jaws 2021.

Shelly

On 12/5/2020 11:14 AM, David Mehler wrote:
Hello,

I just did a Thunderbird upgrade. I'm running v78.5.1 with NVDA
v2020.3. It seems as if this new Thunderbird overwrote my previous
configuration, my accounts are still there but it seems to be bringing
up a lot of extra boxes, adverts, web pages, etc. I was wondering if
anyone had a thunderbird taming setup?

Thanks.
Dave.











.


Re: Something missing from the NVDA menu?

Mike B.
 


Hi Sharon,
 
Are you saying that when you press akey whether it's the, Alt key, down arrow, up arrow or Tab, this what you're hearing instead of the options or whatever you might be navigating? 
 
If so, you can press, NVDA key + 4, on the number row above the main keyboard to toggle the speaking of command keys like arrow, tab and other  keys on and off.
 
Or, if you press, NVDA key + N, for the NVDA menu then press, P, for preferences and press, S, for settings
 
Now down arrow to, Keyboard, and tab to, speak command keys, and uncheck this checkbox.  Tab to, Okay, press enter and make sure to save your settigngs.

Stay safe and take care.  Mike.

----- Original Message -----
Sent: Monday, December 07, 2020 7:59 PM
Subject: Re: [TechTalk] Something missing from the NVDA menu?

I can't tell which option I'm on when I hear just keys.



On 12/7/2020 2:25 PM, David Goldfield wrote:
> Sharon,
> I suspect that your problem might be that your punctuation level is
> either set to none or some punctuation. Could you tell us specifically
> what option you are pointing to when this occurs? Please give us
> detailed steps to reproduce the issue.
>
> David Goldfield,
> Blindness Assistive Technology Specialist
> JAWS Certified, 2019
>
> WWW.DavidGoldfield.org
>
> On 12/7/2020 1:27 PM, Sharon Hooley wrote:
>> Hi,
>>
>> Nowadays when I navigate options in NVDA, I frequently encounter just
>> announcements such as alt, and Alt plus. Maybe that's why I can't
>> seem to navigate the menu? Is there a missing script, or an
>> adjustment I must make in the latest version of Windows 10? Any
>> input would be much appreciated.
>>
>> Thanks,
>>
>>
>> Is it hard to communicate, even with hearing aids? Visit
>> https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cochlearamericas.com%2F&data=04%7C01%7C%7C36dac21b4c2d472a9d9a08d89ade0edd%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637429625799903189%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=UGzZCpjWJeJQ92uC3tLiYkxmDPlyQ1dhJdMHXGW6s7U%3D&reserved=0
>>
>>
>>
>>
>>
>
>
>
>
>
>





getting rid of tables

Madison Martin
 

Hi all,
Can someone please tell me how to get rid of a table in a Word document? I
copied something from an email, and now it's in a table and I don't want it like
that. Using Jaws 2018, Windows 10 version 2004 and Word 2013. Thanks Madison


Re: Something missing from the NVDA menu?

Sharon Hooley
 

I can't tell which option I'm on when I hear just keys.

On 12/7/2020 2:25 PM, David Goldfield wrote:
Sharon,
I suspect that your problem might be that your punctuation level is either set to none or some punctuation. Could you tell us specifically what option you are pointing to when this occurs? Please give us detailed steps to reproduce the issue.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org

On 12/7/2020 1:27 PM, Sharon Hooley wrote:
Hi,

Nowadays when I navigate options in NVDA, I frequently encounter just announcements such as alt, and Alt plus.  Maybe that's why I can't seem to navigate the menu?  Is there a missing script, or an adjustment I must make in the latest version of Windows 10?  Any input would be much appreciated.

Thanks,


Is it hard to communicate, even with hearing aids?  Visit
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cochlearamericas.com%2F&;data=04%7C01%7C%7C36dac21b4c2d472a9d9a08d89ade0edd%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637429625799903189%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=UGzZCpjWJeJQ92uC3tLiYkxmDPlyQ1dhJdMHXGW6s7U%3D&reserved=0







Re: thunderbird 78.5.1 accessibility configuration

Gene
 

I use the portable version so I can't comment on how the installed version might work. You can always copy the thumb drive portable version to the hard drive and use that. I think it’s a better idea to use the portable version even if they both work well. If something goes wrong with the copy on your machine, you can replace it with a backup and not worry about troubleshooting.

Gene

-----Original Message-----
From: Geoff Eden
Sent: Monday, December 07, 2020 8:56 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] thunderbird 78.5.1 accessibility configuration

Hello, this upgrade has confused me. The portable version works
perfectly from a thumb drive, but when working from an installation on
my hard drive the opening screen is like nothing I have ever seen. I
have tried the JAWS cursor, the touch cursor, etc., and there's nothing
there. I have even tried the OCR function on that screen and nothing
makes sense.


I'm sure I'm doing something wrong, but I have no idea what it might be.


I had even installed a working version on a thumb drive and copied the
whole thing to my C drive and got the results described above.


I am running windows 10 in an ice seven Dell desktop with eight gigs of
RAM using JAWS 18. Any help would be very much appreciated.


Geoff




On 12/5/2020 1:14 PM, David Mehler wrote:
Hello,

I just did a Thunderbird upgrade. I'm running v78.5.1 with NVDA
v2020.3. It seems as if this new Thunderbird overwrote my previous
configuration, my accounts are still there but it seems to be bringing
up a lot of extra boxes, adverts, web pages, etc. I was wondering if
anyone had a thunderbird taming setup?

Thanks.
Dave.





Re: thunderbird 78.5.1 accessibility configuration

Geoff Eden <geden1@...>
 

Hello, this upgrade has confused me. The portable version works perfectly from a thumb drive, but when working from an installation on my hard drive the opening screen is like nothing I have ever seen. I have tried the JAWS cursor, the touch cursor, etc., and there's nothing there. I have even tried the OCR function on that screen and nothing makes sense.


I'm sure I'm doing something wrong, but I have no idea what it might be.


I had even installed a working version on a thumb drive and copied the whole thing to my C drive and got the results described above.


I am running windows 10 in an ice seven Dell desktop with eight gigs of RAM using JAWS 18. Any help would be very much appreciated.


Geoff

On 12/5/2020 1:14 PM, David Mehler wrote:
Hello,

I just did a Thunderbird upgrade. I'm running v78.5.1 with NVDA
v2020.3. It seems as if this new Thunderbird overwrote my previous
configuration, my accounts are still there but it seems to be bringing
up a lot of extra boxes, adverts, web pages, etc. I was wondering if
anyone had a thunderbird taming setup?

Thanks.
Dave.




Re: two firefox questions

Gene
 

I forgot to say that after you finish working in options, turn on the virtual PC cursor with JAWS key z or browse mode with NVDA key space. These commands are toggles.

-----Original Message-----
From: Gene
Sent: Monday, December 07, 2020 7:54 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] two firefox questions

Here is one way to set a home page:
In Firefox, open tools with alt t. Then open options by typing o.
Turn off the virtual PC cursor with JAWS key z. If you are using NVDA, turn
off browse mode with NVDA key space.
Shift tab until you get to a list, about three times. You will be on
general. Down arrow to home.
Tab to New windows and tabs. You will be in a combo box that has to do with
the home page.
Up or down arro, I'm not sure what the default is, until you find custom
URLS.
Tab once to paste a URL. Paste one or write one. I don't know how much you
should write, https://www.etc. or just something like nytimes.com. You can
experiment. That's evidently all you do, there is no ok button or
equivalent.

I'll send a message about changing the search engine later.

Gene
----- Original Message -----
-----Original Message-----
From: Vicki W
Sent: Monday, December 07, 2020 6:17 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] two firefox questions


Hi,

I'm having trouble setting up the homepage and switching the search engine
in Firefox. Any easy ways to do this?

Thanks.

Vicki


Re: two firefox questions

Gene
 

Here is one way to set a home page:
In Firefox, open tools with alt t. Then open options by typing o.
Turn off the virtual PC cursor with JAWS key z. If you are using NVDA, turn off browse mode with NVDA key space.
Shift tab until you get to a list, about three times. You will be on general. Down arrow to home.
Tab to New windows and tabs. You will be in a combo box that has to do with the home page.
Up or down arro, I'm not sure what the default is, until you find custom URLS.
Tab once to paste a URL. Paste one or write one. I don't know how much you should write, https://www.etc. or just something like nytimes.com. You can experiment. That's evidently all you do, there is no ok button or equivalent.

I'll send a message about changing the search engine later.

Gene

----- Original Message -----
-----Original Message-----
From: Vicki W
Sent: Monday, December 07, 2020 6:17 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] two firefox questions


Hi,

I'm having trouble setting up the homepage and switching the search engine in Firefox. Any easy ways to do this?

Thanks.

Vicki


two firefox questions

Vicki W
 

Hi,
 
I'm having trouble setting up the homepage and switching the search engine in Firefox. Any easy ways to do this?
 
Thanks.
 
Vicki
 


Re: Something missing from the NVDA menu?

David Goldfield <david.goldfield@...>
 

Sharon,
I suspect that your problem might be that your punctuation level is either set to none or some punctuation. Could you tell us specifically what option you are pointing to when this occurs? Please give us detailed steps to reproduce the issue.

David Goldfield,
Blindness Assistive Technology Specialist
JAWS Certified, 2019

WWW.DavidGoldfield.org

On 12/7/2020 1:27 PM, Sharon Hooley wrote:
Hi,

Nowadays when I navigate options in NVDA, I frequently encounter just announcements such as alt, and Alt plus. Maybe that's why I can't seem to navigate the menu? Is there a missing script, or an adjustment I must make in the latest version of Windows 10? Any input would be much appreciated.

Thanks,


Is it hard to communicate, even with hearing aids? Visit
https://nam10.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cochlearamericas.com%2F&;data=04%7C01%7C%7C36dac21b4c2d472a9d9a08d89ade0edd%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637429625799903189%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&amp;sdata=UGzZCpjWJeJQ92uC3tLiYkxmDPlyQ1dhJdMHXGW6s7U%3D&amp;reserved=0



Re: Working with Pivot Tables

Kerryann Ifill <ksbf@...>
 

Alas no!
Using excel, I found a an item in the context menu “show details” which allowed me to see the info related to the individual. It genrated the sheet and worked beautifully so in that sense its working fine. But as I don’t know how to generate one, not sure how much further it would go.

Kerry

On 7 Dec 2020, at 4:56 PM, Rayn Darren <rayndarren@gmail.com> wrote:

Did this question get answered? I would love to know if these are accessible
yet. Last I knew they weren't.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Kerryann Ifill
Sent: Tuesday, December 1, 2020 6:29 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Working with Pivot Tables

Hi all,,

I have a spreadsheet with pivot tables involved. Could you give me any tips
on how to access the information?

Regards
Kerry










Re: Working with Pivot Tables

Rayn Darren
 

Did this question get answered? I would love to know if these are accessible
yet. Last I knew they weren't.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Kerryann Ifill
Sent: Tuesday, December 1, 2020 6:29 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Working with Pivot Tables

Hi all,,

I have a spreadsheet with pivot tables involved. Could you give me any tips
on how to access the information?

Regards
Kerry


Re: Something missing from the NVDA menu?

Gene
 

I don't know why you are hearing that. If you are talking about the NVDA key n menu, it should work without modification. What happens when you use read current object on an item, if you are using the desktop layout, numpad 8. I doubt you will hear the name read out, but its worth trying.

Also, have you tried uninstalling and reinstalling NVDA? Something may be corrupted.

Gene

-----Original Message-----
From: Sharon Hooley
Sent: Monday, December 07, 2020 12:27 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Something missing from the NVDA menu?

Hi,

Nowadays when I navigate options in NVDA, I frequently encounter just announcements such as alt, and Alt plus. Maybe that's why I can't seem to navigate the menu? Is there a missing script, or an adjustment I must make in the latest version of Windows 10? Any input would be much appreciated.

Thanks,


Is it hard to communicate, even with hearing aids? Visit
www.CochlearAmericas.com


Re: using firefox

Gene
 

You may want to change settings for what the browser does, for example, if it asks you where to download files or change cookie settings, but you don't need to change anything to make it perform differently or better with JAWS.

Gene

-----Original Message-----
From: Vicki W
Sent: Monday, December 07, 2020 12:36 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] using firefox


Hi,

I've just installed Firefox and before I set it up, I'm wondering if there are any settings which might be useful when using with JAWS. Anything I need to change?

Thanks.

Vicki


using firefox

Vicki W
 

Hi,
 
I've just installed Firefox and before I set it up, I'm wondering if there are any settings which might be useful when using with JAWS. Anything I need to change?
 
Thanks.
 
Vicki
 


Something missing from the NVDA menu?

Sharon Hooley
 

Hi,

Nowadays when I navigate options in NVDA, I frequently encounter just announcements such as alt, and Alt plus. Maybe that's why I can't seem to navigate the menu? Is there a missing script, or an adjustment I must make in the latest version of Windows 10? Any input would be much appreciated.

Thanks,


Is it hard to communicate, even with hearing aids? Visit
www.CochlearAmericas.com


Re: advice needed on a speaker for my pc

Nancy Hill
 

You have a very good point.  I realized that I had not specified what type speaker I was looking for after I had sent the message.


I am usually in my 'computer' room by myself and for that I would want an external speaker.  I just want to hear the words plainly.


When we travel I have used some Bose ear buds which have been good at meeting my needs and not bothering my husband while he might be watching TV.  I do not want to use ear phones or buds while at home.


So, I am looking for small speaker/s perhaps mini ones.  I do not want a sound bar because my laptop is small unless it would be reasonably priced and very light weight.  Mono would be all right, I guess, because if I wanted stereo I have a choice of ear phones or ear buds I already have.


Thanks for helping me fill out what I hope to find.


nancy

On 12/7/2020 1:57 AM, Gene wrote:
I'm not asking this to be ;picky, but do you want one speaker for monaural listening, such as to a screen-reader, or a set of stereo speakers?  Also, I find headphones allow me to listen at fast speeds more easily and comfortably and to be able to listen faster missing fewer words.

Have you considered headphones at least for listening to a screen-reader? I'll also add that I don't know if my comments on screen-readers and speed listening apply to all voices.  I'm discussing screen-readers such as Eloquence and DecTalk but I don't like the newer voices and others can discuss them.

These days, light, comfortable headphones that can be used for hours are easily found.  it is also very much cheaper to get good sound for much less money using headphones.

Gene
-----Original Message----- From: Nancy Hill
Sent: Monday, December 07, 2020 12:32 AM
To: TechTalk
Subject: [TechTalk] advice needed on a speaker for my pc

Everyone,


I have a laptop that I love...except for its speakers.


I am currently using an Anker speaker but it is heavy sounding when I
use Jaws and do any other reading on my pc.


Does anyone have a recommendation for a speaker that is not too large
and is very good with language?..and/or one that has the ability for me
to lower the Bass and up the Treble?


Thanks for your thoughts on this matter.


nancy









Re: Seeking BT keyboard to pare with 2 computers

Norma A. Boge
 

Hi Steve, thanks so much for your help. This keyboard looks fantastic and I'm looking forward to working with it. Best, Norma

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Steve Matzura
Sent: Sunday, December 6, 2020 10:42 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Seeking BT keyboard to pare with 2 computers

The Matias keyboard wins hands down. You can get it from the AT Guys, http://www.atguys.com. It's $99 US. It can pair with up to four devices and works with Windows, Android, iOS and MacOS.


On 12/5/2020 3:33 PM, Norma A. Boge wrote:
Hi group,

I need a BT keyboard which will work simultaneously with my 2 Win 10
PCs. I currently use the wireless Logitech K270 with my desktop and I
like it a lot. I'm looking for the features of the K270 (mainly
full-size keyboard and
lightweight) in a keyboard which allows me to connect to my computers.
Please post your relevant suggestions.

Thanks,
Norma

8241 - 8260 of 103365