Date   

Where to type in the two-step authentication code on an iPad Air with OS 14.5?

Sharon Hooley
 

Hi,

When I use two-factor authentication between my iPhone and iPad, where on my iPad do I type in the code sent to my iPhone?

Thanks,


Is it hard to communicate, even with hearing aids? Visit
www.CochlearAmericas.com


Re: Wi-fi calling

Nimer Jaber
 

Hello,

What issue are you having? Or are you looking for step-by-step directions on how to do it? If you are looking for directions, do the following:
1. From a Home screen, swipe up to display all apps. If using a screen reader, swipe up with two fingers.
2. Navigate: Settings > Network & Internet > Mobile Network .
3. Tap Advanced. then tap Wi-Fi calling.
4. Tap the Wi-Fi Calling switch to turn on or off .


On Fri, Jul 9, 2021 at 1:20 PM Michael Rodgerson <monex249@...> wrote:
I need help turning on Wi-fi calling on my Pixel4A.

Thank you


Michael Rodgerson







--
Best,

Nimer Jaber

The message above is intended for the recipient to whom it was
addressed. If you believe that you are not the intended recipient,
please notify me via reply email and destroy all copies of this
correspondence. Action taken as a result of this email or its contents
by anyone other than the intended recipient(s) may result in civil or
criminal charges. I have checked this email and all corresponding
attachments for security threats.

Registered Linux User 529141.
http://counter.li.org/

To find out about a free, open-source, and versatile screen reader for Windows, visit nvaccess.org

You can follow @nimerjaber on Twitter for the latest technology news.

To contact me, you can reply to this email or you may call me at (970) (393-4481) and I will do my best to respond to you promptly.

Thank you, and have a great day!


Wi-fi calling

Michael Rodgerson
 

I need help turning on Wi-fi calling on my Pixel4A.

Thank you


Michael Rodgerson


Talking DAB/FM radio demo

Walter Ramage
 

Hi all.  On another tech list one of the members (must work for the company) posted a link to a new radio product the company is developing.  There is a link to a demonstration and I must say it is rather impressive and when it becomes available, I’ll be one of the first to buy one, especially if it has phono outputs.  You can listen for yourselves and there is a survey for your comments if anybody wishes to respond.  I’ll paste the whole email below.  Walter.

 

Hello.

 

At Taira Technology, we are in the process of developing a fully talking FM and DAB digital radio.

 

So far, we have created a promising prototype and are hoping to incorporate innovative features to make it more than just a radio.

 

Please click on the following link to hear an audio demonstration of our progress so far:

 

https://tairatech.com/Downloads/radio-demo.mp3

 

We would appreciate your feedback and would be very grateful if you could complete the survey at the following link:

 

https://tairatech.com/radio/

 

If you have any comments or have problems completing this survey, please don't hesitate to contact us directly on 03432897501, or email us at contact@....

 

Many thanks,

 

Mo.


Re: Creating a PDF document

heather albright
 

I have a converter called Codex, my friend gave it to me, it says it converts in to pdf. I have not used it for this feature I usually convert in to html or from PDF to txt or word. I have just started using it and I am uncomfortable giving step by step instructions. But if anyone has used this program  maybe the can give out instructions for others. My friend used this converter as they too do not have msword. Heather

 

Sent from Mail for Windows 10

 

From: Gene
Sent: Thursday, July 8, 2021 9:48 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] Creating a PDF document

 

I want to create a PDF document from a Word Processor document.  I don’t have Word.  Will Open Office or another such program do so?  Are there online converters as well, or is there some other program or utility I might use.

 

Gene

 


Re: Creating a PDF document

Gene
 

Thanks to those who made suggestions.  I found a safe online converter. 
I don’t know if such a converter should be used for sensative or confidential information but my file wasn’t such content.
 
Gene


Re: roller tip for aluminum cane

Monte Single
 

The heavy elastic runs from the top to the tip of the cane.

With a  pencil or pen at hand,  pull up on the roller tip and slip the pencil in between the roller tip and the first section of the cane,  let the  roller tip go and  the tenhsion from the roller tip wil pe placed on the pencil.  Now you can just unhook the roller tip  from the elastic loop.

Bob’s your uncle, Jack Robinson, or hot diggity!

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Keith S
Sent: July 8, 2021 9:34 PM
To: tech talk for the blind <main@TechTalk.groups.io>
Subject: [TechTalk] roller tip for aluminum cane

 

Hi, very vague question here.

 

I know that each cane maker is different, and I was told about 16 years ago that an aluminum cane I had been given as a Christmas present required a bit of assembly if I wanted a roller tip put on it.  Somethinga bout the elastic in the shaft of the cane having to be threaded through a hook at the end of the cane so the new cane tip could accept the roller type of tip.

 

The new aluminum cane I recived this past Christmas does not have a roller tip as I had requested and the tip is very very thin, which makes me nervous that I will only have to use the cane about 6 months before I am either looking for a new tip or anew cane all together.

 

I still have the roller tip portion of my old cane, but am having difficulties removing the old tip from the old cane and trying to figure out if it can be placed on the new cane.

 

Anyone ever had to remove or swap out a cane tip for a roll tip?

 

Thanks

 

Keith


Re: roller tip for aluminum cane

 

Hello,
It looks like you would be able to use the marshmallow hook roller tip from EMU-TEK. Simply do a web search for rolling tips for aluminum canes and it should pop up.
Hope this helps,

Ashley

On Jul 8, 2021, at 11:33 PM, Keith S <ks.steinbach03@...> wrote:


Hi, very vague question here.
 
I know that each cane maker is different, and I was told about 16 years ago that an aluminum cane I had been given as a Christmas present required a bit of assembly if I wanted a roller tip put on it.  Somethinga bout the elastic in the shaft of the cane having to be threaded through a hook at the end of the cane so the new cane tip could accept the roller type of tip.
 
The new aluminum cane I recived this past Christmas does not have a roller tip as I had requested and the tip is very very thin, which makes me nervous that I will only have to use the cane about 6 months before I am either looking for a new tip or anew cane all together.
 
I still have the roller tip portion of my old cane, but am having difficulties removing the old tip from the old cane and trying to figure out if it can be placed on the new cane.
 
Anyone ever had to remove or swap out a cane tip for a roll tip?
 
Thanks
 
Keith


roller tip for aluminum cane

Keith S
 

Hi, very vague question here.
 
I know that each cane maker is different, and I was told about 16 years ago that an aluminum cane I had been given as a Christmas present required a bit of assembly if I wanted a roller tip put on it.  Somethinga bout the elastic in the shaft of the cane having to be threaded through a hook at the end of the cane so the new cane tip could accept the roller type of tip.
 
The new aluminum cane I recived this past Christmas does not have a roller tip as I had requested and the tip is very very thin, which makes me nervous that I will only have to use the cane about 6 months before I am either looking for a new tip or anew cane all together.
 
I still have the roller tip portion of my old cane, but am having difficulties removing the old tip from the old cane and trying to figure out if it can be placed on the new cane.
 
Anyone ever had to remove or swap out a cane tip for a roll tip?
 
Thanks
 
Keith


Re: Creating a PDF document

Mike B.
 


See if this will help you at all.
 
Featured snippet from the web
How do I convert a Microsoft Works word processor document to PDF?
 
When you've installed Acrobat, you can make PDF files right out of your word-processing software simply by "printing" the document, and selecting the "printer"
called "Acrobat PDFWriter" from the drop down list of available printers. That process will actually save a file in PDF format, with a ".
Creation of PDFs
https://courts.ms.gov › mec › MEC web page - Cr...
PDF
About this Result
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----
From: Gene
Sent: Thursday, July 08, 2021 7:48 PM
Subject: [TechTalk] Creating a PDF document

I want to create a PDF document from a Word Processor document.  I don’t have Word.  Will Open Office or another such program do so?  Are there online converters as well, or is there some other program or utility I might use.
 
Gene


Re: Creating a PDF document

gbmagoo@...
 

Open the document do you control Peter print if you have a Microsoft computer it has a print to PDF slack that one don’t the print it’s gonna ask you were to save it pick a place to save it and I’ll be labeled whatever name you put on it and I’ll be.pdf star and you want to make sure is.pdf star that way I can be read by screen reader that’s it


On Jul 8, 2021, at 19:48, Gene <gsasner@...> wrote:


I want to create a PDF document from a Word Processor document.  I don’t have Word.  Will Open Office or another such program do so?  Are there online converters as well, or is there some other program or utility I might use.
 
Gene


Creating a PDF document

Gene
 

I want to create a PDF document from a Word Processor document.  I don’t have Word.  Will Open Office or another such program do so?  Are there online converters as well, or is there some other program or utility I might use.
 
Gene


Re: reading pdf's

Kimsan
 

Yes, and I shift tabbed like 10 times.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, July 8, 2021 7:35 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] reading pdf's

 

Do you hear open file dialog spoken when you issue the command control o?  Try shift tabbing more than once.  I don’t know just exactly what you will move through but there should be a list of files and folders, as there is in any standard open dialog.

 

From your description, however, you may not be in the open file dialog.  If not, and if you are using control o, I don’t know what the problem is.  You can use another program, of course, I discussed using browsers because you won’t have to install another program. 

 

If you don’t hear open file dialog when you use control o and wait a little while, let us know and let us know what you do hear.

 

Gene

-----Original Message-----

Sent: Thursday, July 08, 2021 9:21 PM

Subject: Re: [TechTalk] reading pdf's

 

Using chrome, when I do CTRL O, shift tab to navigate to the file, so far all I hear is remove and the name of a recent URL I visited.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, July 8, 2021 1:02 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] reading pdf's

 

What browser do you use?  If it isn’t Internet Explorer and is reasonably current, it will be likely to be able to read PDF documents. 

 

Chrome-based browsers can and Firefox can.  I don’t know about other browsers.

 

Use control o, not control l to open the open file dialog.  Find and open the file just as you would in any open dialog.

 

Wait a bit and then start down arrowing.  You may see preliminary items that don’t matter but below various buttons and perhaps this or that odd and end, the document should begin. 

 

it may be, I haven’t compared or seen much about this, that this or that browser may render a document better in terms of formatting.

 

Gene

-----Original Message-----

Sent: Thursday, July 08, 2021 2:13 PM

Subject: [TechTalk] reading pdf's

 

Hi,

I have a pdf file, I need to be able to read it, what program can I use? Also, where can it be downloaded?

Thanks.


Re: reading pdf's

Gene
 

    I checked a bit ago but I didn’t remember the exact wording correctly.  I hear open dialog.  I then hear file name combo box spoken.  I’m correcting the description for accuracy.  Either way shouldn’t have caused problems This small change in my description of what you hear shouldn’t be of importance and I’m using NVDA.  Even if you hear something slightly different, it shouldn’t matter.  But it may be very helpful to know what you hear when the dialog opens.
 
Gene

-----Original Message-----
From: Gene
Sent: Thursday, July 08, 2021 9:34 PM
Subject: Re: [TechTalk] reading pdf's
 
Do you hear open file dialog spoken when you issue the command control o?  Try shift tabbing more than once.  I don’t know just exactly what you will move through but there should be a list of files and folders, as there is in any standard open dialog.
 
From your description, however, you may not be in the open file dialog.  If not, and if you are using control o, I don’t know what the problem is.  You can use another program, of course, I discussed using browsers because you won’t have to install another program. 
 
If you don’t hear open file dialog when you use control o and wait a little while, let us know and let us know what you do hear.
 
Gene
-----Original Message-----
Sent: Thursday, July 08, 2021 9:21 PM
Subject: Re: [TechTalk] reading pdf's
 

Using chrome, when I do CTRL O, shift tab to navigate to the file, so far all I hear is remove and the name of a recent URL I visited.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, July 8, 2021 1:02 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] reading pdf's

 

What browser do you use?  If it isn’t Internet Explorer and is reasonably current, it will be likely to be able to read PDF documents. 

 

Chrome-based browsers can and Firefox can.  I don’t know about other browsers.

 

Use control o, not control l to open the open file dialog.  Find and open the file just as you would in any open dialog.

 

Wait a bit and then start down arrowing.  You may see preliminary items that don’t matter but below various buttons and perhaps this or that odd and end, the document should begin. 

 

it may be, I haven’t compared or seen much about this, that this or that browser may render a document better in terms of formatting.

 

Gene

-----Original Message-----

Sent: Thursday, July 08, 2021 2:13 PM

Subject: [TechTalk] reading pdf's

 

Hi,

I have a pdf file, I need to be able to read it, what program can I use? Also, where can it be downloaded?

Thanks.


Re: reading pdf's

Gene
 

Do you hear open file dialog spoken when you issue the command control o?  Try shift tabbing more than once.  I don’t know just exactly what you will move through but there should be a list of files and folders, as there is in any standard open dialog.
 
From your description, however, you may not be in the open file dialog.  If not, and if you are using control o, I don’t know what the problem is.  You can use another program, of course, I discussed using browsers because you won’t have to install another program. 
 
If you don’t hear open file dialog when you use control o and wait a little while, let us know and let us know what you do hear.
 
Gene

-----Original Message-----
Sent: Thursday, July 08, 2021 9:21 PM
Subject: Re: [TechTalk] reading pdf's
 

Using chrome, when I do CTRL O, shift tab to navigate to the file, so far all I hear is remove and the name of a recent URL I visited.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, July 8, 2021 1:02 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] reading pdf's

 

What browser do you use?  If it isn’t Internet Explorer and is reasonably current, it will be likely to be able to read PDF documents. 

 

Chrome-based browsers can and Firefox can.  I don’t know about other browsers.

 

Use control o, not control l to open the open file dialog.  Find and open the file just as you would in any open dialog.

 

Wait a bit and then start down arrowing.  You may see preliminary items that don’t matter but below various buttons and perhaps this or that odd and end, the document should begin. 

 

it may be, I haven’t compared or seen much about this, that this or that browser may render a document better in terms of formatting.

 

Gene

-----Original Message-----

Sent: Thursday, July 08, 2021 2:13 PM

Subject: [TechTalk] reading pdf's

 

Hi,

I have a pdf file, I need to be able to read it, what program can I use? Also, where can it be downloaded?

Thanks.


Re: reading pdf's

Kimsan
 

Using chrome, when I do CTRL O, shift tab to navigate to the file, so far all I hear is remove and the name of a recent URL I visited.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Thursday, July 8, 2021 1:02 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] reading pdf's

 

What browser do you use?  If it isn’t Internet Explorer and is reasonably current, it will be likely to be able to read PDF documents. 

 

Chrome-based browsers can and Firefox can.  I don’t know about other browsers.

 

Use control o, not control l to open the open file dialog.  Find and open the file just as you would in any open dialog.

 

Wait a bit and then start down arrowing.  You may see preliminary items that don’t matter but below various buttons and perhaps this or that odd and end, the document should begin. 

 

it may be, I haven’t compared or seen much about this, that this or that browser may render a document better in terms of formatting.

 

Gene

-----Original Message-----

Sent: Thursday, July 08, 2021 2:13 PM

Subject: [TechTalk] reading pdf's

 

Hi,

I have a pdf file, I need to be able to read it, what program can I use? Also, where can it be downloaded?

Thanks.


Re: reading pdf's

Mike B.
 

Bro,
 
Here's the download link for Adobe Reader, but be careful to uncheck any optional offers that they might try to throw in:
 
 
 
 
Stay safe & take care.  Mike.
Just once, I want a username and password prompt to say:  "Close Enough!"
 

----- Original Message -----
Sent: Thursday, July 08, 2021 12:13 PM
Subject: [TechTalk] reading pdf's

Hi,

I have a pdf file, I need to be able to read it, what program can I use? Also, where can it be downloaded?

Thanks.


Oops, I forgot to add something more, but please don't read this again if you don't want to. I hope this is the last time sending it.

Sharon Hooley
 

Welcome to the Hooley Hearing Clinic! My name is Sharon. I am a virtual audiologist, and I'm available now to give anyone a hearing exam via zoom. If you're interested, please send me your contact info to receive notifications, then come back to the Zoom controls. Now, through your headsets or connected hearing devices, please listen for a tone. If you hear it, just press alt+y on your PC, tap the icon on your iPhone, or star-9 in a phone call to raise your hand. This will automaticly send you a billing statement. If you wish to continue this test with different tones with varying volume levels, toggle to lower your hand and repeat the process. Each time you confirm that you heard these sounds, your bill amount will automaticly increase. If you complete the entire exam, wich includes words and sentences spoken by the other members in this meting, I will attach a copy of the results. Should you decide to get a second opinion with another audiologist in person within 30 days, and the results are not the same, send me a message and I will refund you. Garunteed or your money back, no questions asked.


Is it hard to communicate, even with hearing aids? Visit
www.CochlearAmericas.com


Re: need zoom commands for using on land line phone

Ekstrand, Pamela A. -ND
 

Yes, star 6.

 

 

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Pamela Dominguez via groups.io
Sent: Thursday, July 8, 2021 5:12 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] need zoom commands for using on land line phone

 

Those would be along with the star key, right?  Pam.

 

Sent: Thursday, July 08, 2021 1:23 PM

Subject: Re: [TechTalk] need zoom commands for using on land line phone

 

I can confirm that *6 mutes and unmutes.  Not sure about raising your hand.

 

 

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Taylor Durrett via groups.io
Sent: Thursday, July 8, 2021 12:04 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] need zoom commands for using on land line phone

 

Hi. I believe that *9 raises and lowers your hand, and *6 mutes and unmutes. Or it may be the other way around. But those are the main ones.

 

On Jul 8, 2021, at 10:56 AM, Vicki W <vwherry4@...> wrote:



I need the zoom commands for using on my land line phone.

 

Thank you.

 

Vicki

 

 


This email has been checked for viruses by AVG antivirus software.
www.avg.com




Re: need zoom commands for using on land line phone

Pamela Dominguez
 

Those would be along with the star key, right?  Pam.
 

Sent: Thursday, July 08, 2021 1:23 PM
Subject: Re: [TechTalk] need zoom commands for using on land line phone
 

I can confirm that *6 mutes and unmutes.  Not sure about raising your hand.

 

 

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Taylor Durrett via groups.io
Sent: Thursday, July 8, 2021 12:04 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] need zoom commands for using on land line phone

 

Hi. I believe that *9 raises and lowers your hand, and *6 mutes and unmutes. Or it may be the other way around. But those are the main ones.



On Jul 8, 2021, at 10:56 AM, Vicki W <vwherry4@...> wrote:



I need the zoom commands for using on my land line phone.

 

Thank you.

 

Vicki

 




AVG logo

This email has been checked for viruses by AVG antivirus software.
www.avg.com


1761 - 1780 of 102112