Date   

Re: accessible disk imaging software.

Smiling?
 

Interesting, I was thinking that Image for Windows could successfully create incremental backups, but apparently you are correct, it only does full and differential backups because of incremental backups tending to be troublesome.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Akash Kakkar
Sent: Friday, September 25, 2020 0:27
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] accessible disk imaging software.

When I last checked, incremental backups were not available in image for windows.

On 9/25/2020 12:51 PM, Smiling? wrote:
Image for Windows:

https://www.terabyteunlimited.com/image-for-windows.htm


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Austin Pinto
Sent: Thursday, September 24, 2020 21:51
To: access-uk@freelists.org
Subject: [TechTalk] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest










Re: accessible disk imaging software.

Akash Kakkar
 

When I last checked, incremental backups were not available in image for windows.

On 9/25/2020 12:51 PM, Smiling? wrote:
Image for Windows:

https://www.terabyteunlimited.com/image-for-windows.htm


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Austin Pinto
Sent: Thursday, September 24, 2020 21:51
To: access-uk@freelists.org
Subject: [TechTalk] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest









Re: accessible disk imaging software.

Smiling?
 

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Austin Pinto
Sent: Thursday, September 24, 2020 21:51
To: access-uk@freelists.org
Subject: [TechTalk] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest


Re: dropbox question

Sam Taylor <sjt1982@...>
 

Hi, This is my understanding, or wait for it to download, which seems to work for me on a Windows machine.


On 25/09/2020 2:57 pm, Kimsan via groups.io wrote:

Thank you Sam. Can you clarify as the link kinda went over my head so in order to have the mp3 file play that someone puts in my dropbox, I have to disable automatic smart sync?

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Sam Taylor
Sent: Thursday, September 24, 2020 4:54 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] dropbox question

 

DO you have automatic smart sync enabled? This link may explain.

https://help.dropbox.com/installs-integrations/sync-uploads/smart-sync

 

On 25/09/2020 9:50 am, Kimsan via groups.io wrote:

Hi,

I’m unsure if this is a mac related question or dropbox.

What  happening is when someone puts a file in my dropbox, for example, a mp3 it will not play when I vo space or space.

I have to go to sync, click local, leave the db window and come back in and then I can play. How can I set it up so it will play after vo spacing.

Thank you,

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 


Re: accessible disk imaging software.

Akash Kakkar
 

You can go for Macrium Reflect Workstation edition. not fully accessible, but workarounds will work.

On 9/25/2020 10:21 AM, Austin Pinto wrote:
hi all.
i require an accessible disk imaging software that can backup and
restore windows 10 and data and also has incrimental and differencial
backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest




Re: dropbox question

Kimsan
 

Thank you Sam. Can you clarify as the link kinda went over my head so in order to have the mp3 file play that someone puts in my dropbox, I have to disable automatic smart sync?

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Sam Taylor
Sent: Thursday, September 24, 2020 4:54 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] dropbox question

 

DO you have automatic smart sync enabled? This link may explain.

https://help.dropbox.com/installs-integrations/sync-uploads/smart-sync

 

On 25/09/2020 9:50 am, Kimsan via groups.io wrote:

Hi,

I’m unsure if this is a mac related question or dropbox.

What  happening is when someone puts a file in my dropbox, for example, a mp3 it will not play when I vo space or space.

I have to go to sync, click local, leave the db window and come back in and then I can play. How can I set it up so it will play after vo spacing.

Thank you,

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 


accessible disk imaging software.

 

hi all.
i require an accessible disk imaging software that can backup and
restore windows 10 and data and also has incrimental and differencial
backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest


Re: a jaws settings question

Mike B
 


Have you tried exporting your J18 settings, then importing them into J2020?  You could try this just to see if that will help.  But, if you decide to do this backup your J2020 settings beforehand as well so if importing the J18 settings doesn't help you can go back to your original J2020 settings.  Steps are below:
 
You export all your settings by going into the Jaws context menu with, Jaws key + J, if you run Jaws from the system tray.  Then go to, Utilities / Import 
/ Export settings submenu and press enter.  Now arrow down to, Export settings..., press enter, now make sure that the, Export all settings radio  button
is selected.  Tab to, next, press spacebar.  You're now in a dialog to select a name & save location, but the file will already be named and the default
location is the desktop, so tab to finish , press enter and all your settings for that Jaws version will be saved to the desktop.  After you install Jaws
just import this settings file.

 
Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----
Sent: Thursday, September 24, 2020 7:15 PM
Subject: Re: [TechTalk] a jaws settings question

Thanks Gene I hadn't thought of that but it makes sense.

Troy



On 9/24/2020 8:52 PM, Gene wrote:
> That shouldn't be a JAWS problem. Have you had someone look at the
> program when the button is grayed out? It is very likely that it is
> grayed out in the program. Whether you are doing something incorrect
> or the program is having a problem, I don't know.
>
> Gene
> -----Original Message----- From: Troy Burnham
> Sent: Thursday, September 24, 2020 8:46 PM
> To: main@TechTalk.groups.io
> Subject: Re: [TechTalk] a jaws settings question
>
> Mike,
>
> I have jaws 2020 set to read labeled graphics and when I go into the
> game with 2020 loaded it doesn't even see the graphics that 2018 sees.
>
> Maybe it would work to label the graphics with 2018 and then use 2020,
> but it's not the graphics I'm having trouble with it's that the okay
> button is sometimes grayed out for no known reason. In fact I've seen
> it where the okay button is there one time I play and then the next
> time it isn't, and no settings have been changed.
>
> It's just weird to me that I sometimes have the problem and sometimes
> I don't, and yet my friend who also plays never has the problem.
> That's why I was asking about jaws settings, if I knew what settings
> might need to be changed I could compare my settings to the ones my
> friend has.
>
> Troy
>
>
> Troy
>
>
>
>
> On 9/24/2020 6:26 PM, Mike B wrote:
> 
> Check your graphics verboscity setting in J18 then change it to the
> same in J2020 and maybe changing your graphics verboscity setting to,
> Labeled, if it hasn't been already will help.
>
> With the baseball program open press, Insert + 6, on the number row to
> open the Settings Center for this application.
>
> Down arrow to, Graphics and Symbols closed, and right arrow to open.
>
> Down arrow to, Graphics verboscity..., and tap the spacebar to toggle
> through the graphics settings options. Your options are No graphics,
> Labeled graphics and All graphics. Stop on, Labeled graphics, tab to,
> Apply, press the spacebar, tab to, Okay, and press enter to save / close.
>
> If this doesn't help you can return the setting back to where it was
> if you like, but leaving it on Labeled I find works best with Jaws.
>
>
>
> Take care and stay safe. Mike.
> Sent from my iBarstool. Go dodgers!
> ----- Original Message ----- From: Troy Burnham
> To: main@TechTalk.groups.io
> Sent: Thursday, September 24, 2020 3:53 PM
> Subject: [TechTalk] a jaws settings question
>
> Hi all,
>
> I have a baseball game from strat-o-matic.com on my computer that I've
> been playing for about 3 months now, and quite often after I make the
> changes I want to make before playing a game the okay button I need to
> use to move on is grayed out and isn't a button as it should be. I'm
> hoping that somebody here can suggest a setting in jaws that might solve
> this problem, although maybe not because it may work one time and not
> the next and it's with the same settings.
>
> I have another blind friend who plays the game and this never happens to
> him, and btw the game works best with jaws 2018. There are graphics
> before each player's name that jaws 2018 voices that 2020 doesn't and
> that's the reason that we can't use 2020.
>
> If anybody has any ideas please send them my way.
>
> Troy
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>






Re: a jaws settings question

Mike B
 


Just for the hell of it try using the touch cursor to see if you can pick up a button or another control that the Jaws PC cursor isn't picking up.  Gene is probably correct, but in this situation it doesn't hurt to try other options for experimentation sake.  It might be that one of those graphics needs to be clicked on to make the Okay button active.

 
Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----
Sent: Thursday, September 24, 2020 7:15 PM
Subject: Re: [TechTalk] a jaws settings question

Thanks Gene I hadn't thought of that but it makes sense.

Troy



On 9/24/2020 8:52 PM, Gene wrote:
> That shouldn't be a JAWS problem. Have you had someone look at the
> program when the button is grayed out? It is very likely that it is
> grayed out in the program. Whether you are doing something incorrect
> or the program is having a problem, I don't know.
>
> Gene
> -----Original Message----- From: Troy Burnham
> Sent: Thursday, September 24, 2020 8:46 PM
> To: main@TechTalk.groups.io
> Subject: Re: [TechTalk] a jaws settings question
>
> Mike,
>
> I have jaws 2020 set to read labeled graphics and when I go into the
> game with 2020 loaded it doesn't even see the graphics that 2018 sees.
>
> Maybe it would work to label the graphics with 2018 and then use 2020,
> but it's not the graphics I'm having trouble with it's that the okay
> button is sometimes grayed out for no known reason. In fact I've seen
> it where the okay button is there one time I play and then the next
> time it isn't, and no settings have been changed.
>
> It's just weird to me that I sometimes have the problem and sometimes
> I don't, and yet my friend who also plays never has the problem.
> That's why I was asking about jaws settings, if I knew what settings
> might need to be changed I could compare my settings to the ones my
> friend has.
>
> Troy
>
>
> Troy
>
>
>
>
> On 9/24/2020 6:26 PM, Mike B wrote:
> 
> Check your graphics verboscity setting in J18 then change it to the
> same in J2020 and maybe changing your graphics verboscity setting to,
> Labeled, if it hasn't been already will help.
>
> With the baseball program open press, Insert + 6, on the number row to
> open the Settings Center for this application.
>
> Down arrow to, Graphics and Symbols closed, and right arrow to open.
>
> Down arrow to, Graphics verboscity..., and tap the spacebar to toggle
> through the graphics settings options. Your options are No graphics,
> Labeled graphics and All graphics. Stop on, Labeled graphics, tab to,
> Apply, press the spacebar, tab to, Okay, and press enter to save / close.
>
> If this doesn't help you can return the setting back to where it was
> if you like, but leaving it on Labeled I find works best with Jaws.
>
>
>
> Take care and stay safe. Mike.
> Sent from my iBarstool. Go dodgers!
> ----- Original Message ----- From: Troy Burnham
> To: main@TechTalk.groups.io
> Sent: Thursday, September 24, 2020 3:53 PM
> Subject: [TechTalk] a jaws settings question
>
> Hi all,
>
> I have a baseball game from strat-o-matic.com on my computer that I've
> been playing for about 3 months now, and quite often after I make the
> changes I want to make before playing a game the okay button I need to
> use to move on is grayed out and isn't a button as it should be. I'm
> hoping that somebody here can suggest a setting in jaws that might solve
> this problem, although maybe not because it may work one time and not
> the next and it's with the same settings.
>
> I have another blind friend who plays the game and this never happens to
> him, and btw the game works best with jaws 2018. There are graphics
> before each player's name that jaws 2018 voices that 2020 doesn't and
> that's the reason that we can't use 2020.
>
> If anybody has any ideas please send them my way.
>
> Troy
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>






Re: Is there a way to determine who is talking in Zoom?

Norma A. Boge
 

You didn't say which Outlook you're referring to, but in 365 Control 2 opens
the calendar.
Control Shift A is for a new appointment. Just speaking for
365 to avoid confusion.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Wednesday, September 23, 2020 1:11 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

I don't know why you would have to use the bypass command. JAWS shouldn't
use control 2 for anything. It isn't a standard screen-reader command and I
found out now that Outlook uses it for create an appointment.

Gene
-----Original Message-----
From: Kimsan via groups.io
Sent: Wednesday, September 23, 2020 1:02 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

Yes, Gene I am using CTRL 2, as it was listed in the list of keystrokes I
have.

Kimsan Song
kimsansong@icloud.com
If you are into HipHop or R&B, I invite you to subscribe to my youtube
artist channel at https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA
Also, you may follow me on twitter:
https://twitter.com/kims4ns0ng

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Tuesday, September 22, 2020 9:24 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

No, but are you using control 2? That would be a most unlikely command for
a screen-reader to use, particularly since it is used in some programs like
Windows Media Player to change where you are in the program.

Gene
-----Original Message-----
From: Kimsan via groups.io
Sent: Tuesday, September 22, 2020 11:18 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

Gene, Using NVDA, which I presume you used, did you have to do a bypass
command, I did for jaws.
I ask that because lol, someone spoke today and by the time I issued those
two keystrokes, they finished talking and I didn't catch the name.

Kimsan Song
kimsansong@icloud.com
If you are into HipHop or R&B, I invite you to subscribe to my youtube
artist channel at https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA
Also, you may follow me on twitter:
https://twitter.com/kims4ns0ng

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Tuesday, September 22, 2020 8:31 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

The command is a Zoom command. it isn't a screen-reader command. A sighted
friend told me there is a visual way the program shows who is speaking.
Presumably, the underlying information the program uses for the visual
display is accessible to the screen-reader. The screen doesn't change
because sighted people already have the information. I assume the
screen-reader is made to speak by the program using whatever it uses to
force speech whenever an alert is spoken.

Gene
-----Original Message-----
From: Kimsan via groups.io
Sent: Tuesday, September 22, 2020 9:34 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

Gene,
I forgot to ask since I am still trying to determine if this key stroke is
screen reader exclusive.
I have no one to test it on using NVDA but when using it in a meeting
earlier today at work using jaws latest, I had to evoke the bypass key then
press CTRL 2.
My coworkers who do not use any screen reader, it didn't work. Then again,
why would it, they don't need to hear who is talking, I suppose as they can
probably tell in another way?

Kimsan Song
kimsansong@icloud.com
If you are into HipHop or R&B, I invite you to subscribe to my youtube
artist channel at https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA
Also, you may follow me on twitter:
https://twitter.com/kims4ns0ng

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Tuesday, September 22, 2020 1:20 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

Thanks to those who gave information. I tried control 2 in a test meeting
and it worked. I had looked at a list of shortcut keys in the past but
there are so many I thought it might be faster and easier to ask.

That's an important command for people to know. I often wonder who is
speaking in a meeting if I don't know the people or don't know them well.

Gene
-----Original Message-----
From: Kimsan via groups.io
Sent: Tuesday, September 22, 2020 1:27 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

Or try ctrl 2.
I'm reading these from a list of commands posted on this list many moons
ago.

Kimsan Song
kimsansong@icloud.com
If you are into HipHop or R&B, I invite you to subscribe to my youtube
artist channel at https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA
Also, you may follow me on twitter:
https://twitter.com/kims4ns0ng

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gene
Sent: Monday, September 21, 2020 11:10 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Is there a way to determine who is talking in Zoom?

To clarify, because I want my whole message in the message body in case
someone doesn't pay attention to the subject line, is there any way to have
Zoom announce who is talking? I haven't found one and nothing in the
description of the NVDA add-on says the add-on provides this ability.

I don't use JAWS anymore, but it would still be good to know if it can do
this.

Gene
-----Original Message-----
From: Gene
Sent: Monday, September 21, 2020 10:52 PM
To: main@TechTalk.groups.io
Subject: Is there a way to determine who is talking in Zoom?

Is there a way, either using JAWS or NVDA, to determine who is speaking? I
haven't seen any command to do so and when I've looked around the interface,
I see no way the screen-reader can tell you that.

Thanks for information.

Gene


Re: a jaws settings question

Troy Burnham
 

Thanks Gene I hadn't thought of that but it makes sense.

Troy

On 9/24/2020 8:52 PM, Gene wrote:
That shouldn't be a JAWS problem.  Have you had someone look at the program when the button is grayed out?  It is very likely that it is grayed out in the program.  Whether you are doing something incorrect or the program is having a problem, I don't know.

Gene
-----Original Message----- From: Troy Burnham
Sent: Thursday, September 24, 2020 8:46 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] a jaws settings question

Mike,

I have jaws 2020 set to read labeled graphics and when I go into the game with 2020 loaded it doesn't even see the graphics that 2018 sees.

Maybe it would work to label the graphics with 2018 and then use 2020, but it's not the graphics I'm having trouble with it's that the okay button is sometimes grayed out for no known reason. In fact I've seen it where the okay button is there one time I play and then the next time it isn't, and no settings have been changed.

It's just weird to me that I sometimes have the problem and sometimes I don't, and yet my friend who also plays never has the problem. That's why I was asking about jaws settings, if I knew what settings might need to be changed I could compare my settings to the ones my friend has.

Troy


Troy




On 9/24/2020 6:26 PM, Mike B wrote:

Check your graphics verboscity setting in J18 then change it to the same in J2020 and maybe changing your graphics verboscity setting to, Labeled, if it hasn't been already will help.

With the baseball program open press, Insert + 6, on the number row to open the Settings Center for this application.

Down arrow to, Graphics and Symbols closed, and right arrow to open.

Down arrow to, Graphics verboscity..., and tap the spacebar to toggle through the graphics settings options.  Your options are No graphics, Labeled graphics and All graphics.  Stop on, Labeled graphics, tab to, Apply, press the spacebar, tab to, Okay, and press enter to save / close.

If this doesn't help you can return the setting back to where it was if you like, but leaving it on Labeled I find works best with Jaws.



Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message ----- From: Troy Burnham
To: main@TechTalk.groups.io
Sent: Thursday, September 24, 2020 3:53 PM
Subject: [TechTalk] a jaws settings question

Hi all,

I have a baseball game from strat-o-matic.com on my computer that I've
been playing for about 3 months now, and quite often after I make the
changes I want to make before playing a game the okay button I need to
use to move on is grayed out and isn't a button as it should be. I'm
hoping that somebody here can suggest a setting in jaws that might solve
this problem, although maybe not because it may work one time and not
the next and it's with the same settings.

I have another blind friend who plays the game and this never happens to
him, and btw the game works best with jaws 2018. There are graphics
before each player's name that jaws 2018 voices that 2020 doesn't and
that's the reason that we can't use 2020.

If anybody has any ideas please send them my way.

Troy














Re: a jaws settings question

Gene
 

That shouldn't be a JAWS problem. Have you had someone look at the program when the button is grayed out? It is very likely that it is grayed out in the program. Whether you are doing something incorrect or the program is having a problem, I don't know.

Gene

-----Original Message-----
From: Troy Burnham
Sent: Thursday, September 24, 2020 8:46 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] a jaws settings question

Mike,

I have jaws 2020 set to read labeled graphics and when I go into the game with 2020 loaded it doesn't even see the graphics that 2018 sees.

Maybe it would work to label the graphics with 2018 and then use 2020, but it's not the graphics I'm having trouble with it's that the okay button is sometimes grayed out for no known reason. In fact I've seen it where the okay button is there one time I play and then the next time it isn't, and no settings have been changed.

It's just weird to me that I sometimes have the problem and sometimes I don't, and yet my friend who also plays never has the problem. That's why I was asking about jaws settings, if I knew what settings might need to be changed I could compare my settings to the ones my friend has.

Troy


Troy




On 9/24/2020 6:26 PM, Mike B wrote:

Check your graphics verboscity setting in J18 then change it to the same in J2020 and maybe changing your graphics verboscity setting to, Labeled, if it hasn't been already will help.

With the baseball program open press, Insert + 6, on the number row to open the Settings Center for this application.

Down arrow to, Graphics and Symbols closed, and right arrow to open.

Down arrow to, Graphics verboscity..., and tap the spacebar to toggle through the graphics settings options. Your options are No graphics, Labeled graphics and All graphics. Stop on, Labeled graphics, tab to, Apply, press the spacebar, tab to, Okay, and press enter to save / close.

If this doesn't help you can return the setting back to where it was if you like, but leaving it on Labeled I find works best with Jaws.



Take care and stay safe. Mike.
Sent from my iBarstool. Go dodgers!
----- Original Message -----
From: Troy Burnham
To: main@TechTalk.groups.io
Sent: Thursday, September 24, 2020 3:53 PM
Subject: [TechTalk] a jaws settings question

Hi all,

I have a baseball game from strat-o-matic.com on my computer that I've
been playing for about 3 months now, and quite often after I make the
changes I want to make before playing a game the okay button I need to
use to move on is grayed out and isn't a button as it should be. I'm
hoping that somebody here can suggest a setting in jaws that might solve
this problem, although maybe not because it may work one time and not
the next and it's with the same settings.

I have another blind friend who plays the game and this never happens to
him, and btw the game works best with jaws 2018. There are graphics
before each player's name that jaws 2018 voices that 2020 doesn't and
that's the reason that we can't use 2020.

If anybody has any ideas please send them my way.

Troy


Re: a jaws settings question

Troy Burnham
 

Mike,

I have jaws 2020 set to read labeled graphics and when I go into the game with 2020 loaded it doesn't even see the graphics that 2018 sees.

Maybe it would work to label the graphics with 2018 and then use 2020, but it's not the graphics I'm having trouble with it's that the okay button is sometimes grayed out for no known reason. In fact I've seen it where the okay button is there one time I play and then the next time it isn't, and no settings have been changed.

It's just weird to me that I sometimes have the problem and sometimes I don't, and yet my friend who also plays never has the problem. That's why I was asking about jaws settings, if I knew what settings might need to be changed I could compare my settings to the ones my friend has.

Troy


Troy



On 9/24/2020 6:26 PM, Mike B wrote:

Check your graphics verboscity setting in J18 then change it to the same in J2020 and maybe changing your graphics verboscity setting to, Labeled, if it hasn't been already will help. 
 
With the baseball program open press, Insert + 6, on the number row to open the Settings Center for this application.
 
Down arrow to, Graphics and Symbols closed, and right arrow to open.
 
Down arrow to, Graphics verboscity..., and tap the spacebar to toggle through the graphics settings options.  Your options are No graphics, Labeled graphics and All graphics.  Stop on, Labeled graphics, tab to, Apply, press the spacebar, tab to, Okay, and press enter to save / close.
 
If this doesn't help you can return the setting back to where it was if you like, but leaving it on Labeled I find works best with Jaws.
 
 

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
Sent: Thursday, September 24, 2020 3:53 PM
Subject: [TechTalk] a jaws settings question

Hi all,

I have a baseball game from strat-o-matic.com on my computer that I've
been playing for about 3 months now, and quite often after I make the
changes I want to make before playing a game the okay button I need to
use to move on is grayed out and isn't a button as it should be. I'm
hoping that somebody here can suggest a setting in jaws that might solve
this problem, although maybe not because it may work one time and not
the next and it's with the same settings.

I have another blind friend who plays the game and this never happens to
him, and btw the game works best with jaws 2018. There are graphics
before each player's name that jaws 2018 voices that 2020 doesn't and
that's the reason that we can't use 2020.

If anybody has any ideas please send them my way.

Troy








Re: dropbox question

Sam Taylor <sjt1982@...>
 

DO you have automatic smart sync enabled? This link may explain.

https://help.dropbox.com/installs-integrations/sync-uploads/smart-sync


On 25/09/2020 9:50 am, Kimsan via groups.io wrote:

Hi,

I’m unsure if this is a mac related question or dropbox.

What  happening is when someone puts a file in my dropbox, for example, a mp3 it will not play when I vo space or space.

I have to go to sync, click local, leave the db window and come back in and then I can play. How can I set it up so it will play after vo spacing.

Thank you,

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 


dropbox question

Kimsan
 

Hi,

I’m unsure if this is a mac related question or dropbox.

What  happening is when someone puts a file in my dropbox, for example, a mp3 it will not play when I vo space or space.

I have to go to sync, click local, leave the db window and come back in and then I can play. How can I set it up so it will play after vo spacing.

Thank you,

 

Kimsan Song

kimsansong@...

If you are into HipHop or R&B, I invite you to subscribe to my youtube artist channel at

https://www.youtube.com/channel/UCFzrNcgBfHguK-LnnJMMylA

Also, you may follow me on twitter:

https://twitter.com/kims4ns0ng

 


Re: a jaws settings question

Mike B
 


Check your graphics verboscity setting in J18 then change it to the same in J2020 and maybe changing your graphics verboscity setting to, Labeled, if it hasn't been already will help. 
 
With the baseball program open press, Insert + 6, on the number row to open the Settings Center for this application.
 
Down arrow to, Graphics and Symbols closed, and right arrow to open.
 
Down arrow to, Graphics verboscity..., and tap the spacebar to toggle through the graphics settings options.  Your options are No graphics, Labeled graphics and All graphics.  Stop on, Labeled graphics, tab to, Apply, press the spacebar, tab to, Okay, and press enter to save / close.
 
If this doesn't help you can return the setting back to where it was if you like, but leaving it on Labeled I find works best with Jaws.
 
 

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----
Sent: Thursday, September 24, 2020 3:53 PM
Subject: [TechTalk] a jaws settings question

Hi all,

I have a baseball game from strat-o-matic.com on my computer that I've
been playing for about 3 months now, and quite often after I make the
changes I want to make before playing a game the okay button I need to
use to move on is grayed out and isn't a button as it should be. I'm
hoping that somebody here can suggest a setting in jaws that might solve
this problem, although maybe not because it may work one time and not
the next and it's with the same settings.

I have another blind friend who plays the game and this never happens to
him, and btw the game works best with jaws 2018. There are graphics
before each player's name that jaws 2018 voices that 2020 doesn't and
that's the reason that we can't use 2020.

If anybody has any ideas please send them my way.

Troy







Re: MP3 Direct Cut Splitting with Cue Marks

Gene
 

I've never bothered with cue points. I don't know if one method is faster and easier than the other, but I manually set markers, then do what I want to do with whatever is between them.

If you want to save all the songs in an album in separate files, you can do the following:
First, remove any blank space or space at the beginning of the file containing audio.
Set the start marker at the beginning of the file with b. Move to where you want the file to begin and press n to set the end marker. Then press the delete key.
Now, set the start marker again at the beginning of the file. This would be the first song, in this case.
Move to the end of the song and set the end marker.
Now use the save selected option to save the song.
The command is control e. Write the name you want to give the song and press enter.
The song will be saved. After you save it, delete it with the delete key.
Now set the start marker at the beginning of the file again.
I am assuming that there is some blank space between songs. Move to the start of the song, set the end marker just before the beginning, and delete.
Now follow the procedure I outlined above.

I haven't described how to do fine editing, which you may want to do when moving the markers to the end of a song, so you can be at the end and not leave unwanted blank space or not leave unwanted blank space at the beginning. I may explain it in another message or I may send you a link to download my MP3 tutorial which teaches the basics, including editing.

Gene

-----Original Message-----
From: Rich DeSteno
Sent: Thursday, September 24, 2020 4:49 PM
To: main@TechTalk.groups.io
Subject: [TechTalk] MP3 Direct Cut Splitting with Cue Marks

In MP3 Direct Cut, how does one manually place cue points in an MP3 file
to enable splitting of an MP3 album into individual song tracks? I am
aware of pressing control-shift-a to enable auto splitting by time
segments, but I cannot locate in the manual how you use the keyboard to
manually place cue points between each song track.

--
Rich De Steno


a jaws settings question

Troy Burnham
 

Hi all,

I have a baseball game from strat-o-matic.com on my computer that I've been playing for about 3 months now, and quite often after I make the changes I want to make before playing a game the okay button I need to use to move on is grayed out and isn't a button as it should be. I'm hoping that somebody here can suggest a setting in jaws that might solve this problem, although maybe not because it may work one time and not the next and it's with the same settings.

I have another blind friend who plays the game and this never happens to him, and btw the game works best with jaws 2018. There are graphics before each player's name that jaws 2018 voices that 2020 doesn't and that's the reason that we can't use 2020.

If anybody has any ideas please send them my way.

Troy


Re: MP3 Direct Cut Splitting with Cue Marks

Steve Matzura
 

B for Beginning and N for End. Don't know why N = End, but it does. You move the pointer to wherever you want to start cutting either with the PageDown key or by typing a time into the not-so-obvious edit field, then press B to mark the beginning, move the time line pointer again and pres N.

On 9/24/2020 5:49 PM, Rich DeSteno wrote:
In MP3 Direct Cut, how does one manually place cue points in an MP3 file to enable splitting of an MP3 album into individual song tracks? I am aware of pressing control-shift-a to enable auto splitting by time segments, but I cannot locate in the manual how you use the keyboard to manually place cue points between each song track.


MP3 Direct Cut Splitting with Cue Marks

Rich DeSteno
 

In MP3 Direct Cut, how does one manually place cue points in an MP3 file to enable splitting of an MP3 album into individual song tracks?  I am aware of pressing control-shift-a to enable auto splitting by time segments, but I cannot locate in the manual how you use the keyboard to manually place cue points between each song track.

--
Rich De Steno

5321 - 5340 of 98153