Date   

accessible tens unit

heather albright
 

Hello, I am looking for an accessible tens unit? One that beeps or talks when I am setting the unit up. So anyone have any ideas or have you come across one? Thanks Heather

 

Sent from Mail for Windows 10

 


Roku.

Carolyn Arnold
 

Could someone explain how Roku works? Do you stream through
your Wi-Fi? Does it improve the picture like cable does? Can
you operate more than one TV with it, and if so, how? Does
the talking remote cost extra, or is it like a smart phone
with some sort of voice screen reading? Is installation
complicated? Are there tiers or levels of it like with
cable?

Anything you can tell me will be more than I know. Thanks
for any help.


Re: Accessible Data recovery software

Pablo Morales
 

Actually,

It worked much better that what I was expecting. The program is very accessible and easy to use. Well, I think that it is easy because it is accessible.
Thank you very much for your recommendation.
It works great

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Jaffar Sidek
Sent: Thursday, January 30, 2020 10:18 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Accessible Data recovery software

Hi. The same company that distributes CCleaner has a recovery tool called Recuva. It is quite accessible and I believe they do have a trial version. However, it must be noted that file recovery doesn't work as straightforward as might be expected because a lot of what is recovered depends on how clean or corrupt your disk's sectors are. Also, If you have overridden a file and wish to recover it, great chance is you might not be able to. Still, the success rate of file recovery can be quite high, with Recuva, depending on the state of your disk. Cheers!

On 1/30/2020 10:04 PM, Pablo Morales wrote:
Hello all,

I am trying to recovered some data that I had on a SSD drive. SSD
drive that I formatted by mistake. I have tried some software that
looks very reliable to recover data after these kind of accidents.
Nevertheless, I have found that these programs are no accessible at all.
Does anyone any accessible software that I could use to recover this
kind of data from a hard drive/SSD drive that was formatted?
Thanks for all,





Re: Slow Cooker Recommendations

 

The Wolfgang puck is very accessible. It just has one lever that you push down twice to cook and once it is done it will automatically flip up to warm. Let me know if you have any other questions.


Ashley Breger

On Jan 30, 2020, at 11:01 AM, Joe Orozco <jsoro824@...> wrote:

Hello,

Can anyone recommend a reliable and accessible slow cooker? I thought
of going after the Instant Pot, but I’m not interested in memorizing
keystrokes to make it work. The manual design of the Crock Pot brand
seems good, but I’d like something I can at least have switch
automatically to a warming function after the 8 hours or so are
complete. Thank you kindly in advance for any suggestions.

Joe



Re: the VIP thermostat

Mike B
 


Hi Andy,
 
No, I know of no way of doing that.

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----
Sent: Thursday, January 30, 2020 7:05 AM
Subject: Re: [TechTalk] the VIP thermostat

Hello Mike what I mean about locking the thermostat is locking the up and down buttons for turning the air or heat up and down because when people come in they want to set the heat or air to there liking and the only way I know what it is set on is to check it after they leave. The thermostat seams to be doing ok if people would leave it alone.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Wednesday, January 29, 2020 11:45 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

 

Hi Andy,

 

The only way I know of is to run the thermostat in manual mode, all programs turned off, but you would have to switch from AC to Heat manually which you have to do anyways.  But, let's say you wanted to have the stat on 75º, and if your cycle / split rate is at 1, 2, or whatever you wouldn't stay at a constant 75º anyways, it'll always fluctuate according to the cycle / split rate.  It's better to have the, economically speaking anyways,  cycle / split rate set on, 2, to give a combination of comfort and not kicking the system off / on too often.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: andy.tidwell

Sent: Wednesday, January 29, 2020 7:46 PM

Subject: Re: [TechTalk] the VIP thermostat

 

Hello Mike, I have a question for you. Is there any way to lock the temperature so it can’t be changed ? I haven’t found anything in the book about that feature.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Wednesday, January 29, 2020 10:01 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

 

Hi Troy,

 

It definitely takes being able to see to change the cycle / split rate.  Do you have the manual or CD that came with the thermostat?  I can send you steps, but if I were you I would choose the cycle / split rate to be set at 2.  I explained the using a 4 split, but the default is supposed to be 2.

 

Below is a direct Dropbox link for a folder with several notes I've made  along with the files from the book and CD that come with the VIP thermostat.

 


 

 

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Troy Burnham

Sent: Wednesday, January 29, 2020 3:52 PM

Subject: Re: [TechTalk] the VIP thermostat

 

Mike,

Can we adjust that without professional help? Meaning do we need to call the company that installed the thermostat and have them do this?

Troy

On 1/29/2020 3:38 PM, Mike B wrote:



Hi Troy,

 

It sounds like your cycle / split rate needs to be looked at.  This controls when the AC or Heat starts & stops.  If your set thermostat temperature is 75º for the AC and the split rate is set at 4, then the AC will start when the room temperature is 2º above set temperature and shut off when the room temperature hits 2º below set temperature.

 

For heat, if the Thermostat is set at 75º and split rate is 4 the heat will come on at 2º below set temperature and shut off at 2º above set temperature.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Troy Burnham

Sent: Wednesday, January 29, 2020 12:28 PM

Subject: Re: [TechTalk] the VIP thermostat

 

I had my thermostat installed by a guy who works at an air conditioner
installation company because I figured he'd know how to do it.

I forgot to mention in my original note that we also looked up the
jumper switch settings in the manual and made sure they were correct.

Troy



On 1/29/2020 11:41 AM, Peter Spitz wrote:
> I've had my VIP 3000 for over three years and haven't had any problems
> with it.  I wonder if yours was installed improperly?   I paid an
> electrician to install it and he had to rewire something to get it to
> work properly but it does work flawlessly after the professional
> installation.
>
>
>

 


Re: a possible groups.io problem

Alex Stone
 

Glad to be able to help. I remember when it happened to me, it took me a long time to work it out!


From: main@TechTalk.groups.io <main@TechTalk.groups.io> on behalf of Troy Burnham <troyburnham34@...>
Sent: Thursday, January 30, 2020 5:22:07 PM
To: main@TechTalk.groups.io <main@TechTalk.groups.io>
Subject: Re: [TechTalk] a possible groups.io problem
 
Thanks for the suggestion Alex, I just sent an unsubscribe e-mail from gmail and got the confirmation message meaning I am subscribed and didn't realize it. I'm due to get the newsletter in the next few days so hopefully I get it.

Troy



On 1/30/2020 11:04 AM, Alex Stone wrote:
Troy, the only time I’ve ever seen anything like this, is if I’ve tried to subscribe to a group that I’m already subscribed to but am no mail or digest mode or something.


From: main@TechTalk.groups.io <main@TechTalk.groups.io> on behalf of Troy Burnham <troyburnham34@...>
Sent: Thursday, January 30, 2020 4:52:54 PM
To: main@TechTalk.groups.io <main@TechTalk.groups.io>
Subject: [TechTalk] a possible groups.io problem
 
Hi all,

I've been trying for a couple of weeks to subscribe to a newsletter
that's on groups.io and I never get the confirmation message that I'm to
reply to. I'm trying to subscribe with gmail and I've looked in my spam
folder on gmail.com and the confirmation e-mail isn't going there
either. I'm sending the e-mail to NewsletterName+subscribe@groups.io, is
there anything else I can do? It's an active newsletter because I know
several people who subscribe to it and receive issues every month.

Troy







Re: a possible groups.io problem

Troy Burnham
 

Thanks for the suggestion Alex, I just sent an unsubscribe e-mail from gmail and got the confirmation message meaning I am subscribed and didn't realize it. I'm due to get the newsletter in the next few days so hopefully I get it.

Troy



On 1/30/2020 11:04 AM, Alex Stone wrote:
Troy, the only time I’ve ever seen anything like this, is if I’ve tried to subscribe to a group that I’m already subscribed to but am no mail or digest mode or something.


From: main@TechTalk.groups.io <main@TechTalk.groups.io> on behalf of Troy Burnham <troyburnham34@...>
Sent: Thursday, January 30, 2020 4:52:54 PM
To: main@TechTalk.groups.io <main@TechTalk.groups.io>
Subject: [TechTalk] a possible groups.io problem
 
Hi all,

I've been trying for a couple of weeks to subscribe to a newsletter
that's on groups.io and I never get the confirmation message that I'm to
reply to. I'm trying to subscribe with gmail and I've looked in my spam
folder on gmail.com and the confirmation e-mail isn't going there
either. I'm sending the e-mail to NewsletterName+subscribe@groups.io, is
there anything else I can do? It's an active newsletter because I know
several people who subscribe to it and receive issues every month.

Troy







Re: a possible groups.io problem

Alex Stone
 

Troy, the only time I’ve ever seen anything like this, is if I’ve tried to subscribe to a group that I’m already subscribed to but am no mail or digest mode or something.


From: main@TechTalk.groups.io <main@TechTalk.groups.io> on behalf of Troy Burnham <troyburnham34@...>
Sent: Thursday, January 30, 2020 4:52:54 PM
To: main@TechTalk.groups.io <main@TechTalk.groups.io>
Subject: [TechTalk] a possible groups.io problem
 
Hi all,

I've been trying for a couple of weeks to subscribe to a newsletter
that's on groups.io and I never get the confirmation message that I'm to
reply to. I'm trying to subscribe with gmail and I've looked in my spam
folder on gmail.com and the confirmation e-mail isn't going there
either. I'm sending the e-mail to NewsletterName+subscribe@groups.io, is
there anything else I can do? It's an active newsletter because I know
several people who subscribe to it and receive issues every month.

Troy






Slow Cooker Recommendations

Joe Orozco
 

Hello,

Can anyone recommend a reliable and accessible slow cooker? I thought
of going after the Instant Pot, but I’m not interested in memorizing
keystrokes to make it work. The manual design of the Crock Pot brand
seems good, but I’d like something I can at least have switch
automatically to a warming function after the 8 hours or so are
complete. Thank you kindly in advance for any suggestions.

Joe


a possible groups.io problem

Troy Burnham
 

Hi all,

I've been trying for a couple of weeks to subscribe to a newsletter that's on groups.io and I never get the confirmation message that I'm to reply to. I'm trying to subscribe with gmail and I've looked in my spam folder on gmail.com and the confirmation e-mail isn't going there either. I'm sending the e-mail to NewsletterName+subscribe@groups.io, is there anything else I can do? It's an active newsletter because I know several people who subscribe to it and receive issues every month.

Troy


Re: contacting the VIP thermostat's manufacturer?

James Bentley
 

Hi Troy.

Here you go.

SmartWay Solutions toll free at 866-743-5663.

Regards,

James B

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Troy Burnham
Sent: Thursday, January 30, 2020 9:14 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] contacting the VIP thermostat's manufacturer?

Hi all,

Does anybody have a contact phone number for the VIP thermostat
manufacturer? As I stated in a previous note I bought mine from
TalkingThermostats.com which of course is no longer in business.

Thanks.

Troy


Re: Accessible Data recovery software

Jaffar Sidek
 

Hi.  The same company that distributes CCleaner has a recovery tool called Recuva.  It is quite accessible and I believe they do have a trial version.  However, it must be noted that file recovery doesn't work as straightforward as might be expected because a lot of what is recovered depends on how clean or corrupt your disk's sectors are.  Also, If you have overridden a file and wish to recover it, great chance is you might not be able to. Still, the success rate of file recovery can be quite high, with Recuva, depending on the state of your disk.  Cheers!

On 1/30/2020 10:04 PM, Pablo Morales wrote:
Hello all,

I am trying to recovered some data that I had on a SSD drive. SSD drive that
I formatted by mistake. I have tried some software that looks very reliable
to recover data after these kind of accidents. Nevertheless, I have found
that these programs are no accessible at all.
Does anyone any accessible software that I could use to recover this kind of
data from a hard drive/SSD drive that was formatted?
Thanks for all,




contacting the VIP thermostat's manufacturer?

Troy Burnham
 

Hi all,

Does anybody have a contact phone number for the VIP thermostat manufacturer? As I stated in a previous note I bought mine from TalkingThermostats.com which of course is no longer in business.

Thanks.

Troy


Re: the VIP thermostat

andy.tidwell
 

Hello Mike what I mean about locking the thermostat is locking the up and down buttons for turning the air or heat up and down because when people come in they want to set the heat or air to there liking and the only way I know what it is set on is to check it after they leave. The thermostat seams to be doing ok if people would leave it alone.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Wednesday, January 29, 2020 11:45 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

 

Hi Andy,

 

The only way I know of is to run the thermostat in manual mode, all programs turned off, but you would have to switch from AC to Heat manually which you have to do anyways.  But, let's say you wanted to have the stat on 75º, and if your cycle / split rate is at 1, 2, or whatever you wouldn't stay at a constant 75º anyways, it'll always fluctuate according to the cycle / split rate.  It's better to have the, economically speaking anyways,  cycle / split rate set on, 2, to give a combination of comfort and not kicking the system off / on too often.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

Sent: Wednesday, January 29, 2020 7:46 PM

Subject: Re: [TechTalk] the VIP thermostat

 

Hello Mike, I have a question for you. Is there any way to lock the temperature so it can’t be changed ? I haven’t found anything in the book about that feature.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Wednesday, January 29, 2020 10:01 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

 

Hi Troy,

 

It definitely takes being able to see to change the cycle / split rate.  Do you have the manual or CD that came with the thermostat?  I can send you steps, but if I were you I would choose the cycle / split rate to be set at 2.  I explained the using a 4 split, but the default is supposed to be 2.

 

Below is a direct Dropbox link for a folder with several notes I've made  along with the files from the book and CD that come with the VIP thermostat.

 


 

 

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

Sent: Wednesday, January 29, 2020 3:52 PM

Subject: Re: [TechTalk] the VIP thermostat

 

Mike,

Can we adjust that without professional help? Meaning do we need to call the company that installed the thermostat and have them do this?

Troy

On 1/29/2020 3:38 PM, Mike B wrote:



Hi Troy,

 

It sounds like your cycle / split rate needs to be looked at.  This controls when the AC or Heat starts & stops.  If your set thermostat temperature is 75º for the AC and the split rate is set at 4, then the AC will start when the room temperature is 2º above set temperature and shut off when the room temperature hits 2º below set temperature.

 

For heat, if the Thermostat is set at 75º and split rate is 4 the heat will come on at 2º below set temperature and shut off at 2º above set temperature.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

Sent: Wednesday, January 29, 2020 12:28 PM

Subject: Re: [TechTalk] the VIP thermostat

 

I had my thermostat installed by a guy who works at an air conditioner
installation company because I figured he'd know how to do it.

I forgot to mention in my original note that we also looked up the
jumper switch settings in the manual and made sure they were correct.

Troy



On 1/29/2020 11:41 AM, Peter Spitz wrote:
> I've had my VIP 3000 for over three years and haven't had any problems
> with it.  I wonder if yours was installed improperly?   I paid an
> electrician to install it and he had to rewire something to get it to
> work properly but it does work flawlessly after the professional
> installation.
>
>
>

 


Accessible Data recovery software

Pablo Morales
 

Hello all,

I am trying to recovered some data that I had on a SSD drive. SSD drive that
I formatted by mistake. I have tried some software that looks very reliable
to recover data after these kind of accidents. Nevertheless, I have found
that these programs are no accessible at all.
Does anyone any accessible software that I could use to recover this kind of
data from a hard drive/SSD drive that was formatted?
Thanks for all,


Re: the VIP thermostat

James Bentley
 

Hello Ann,

I tried all of the suggestions mentioned on this list. So did two different
maintenance men.

The manufacturer also couldn't figure out why my VIP 3000 wasn't responding
to commands. I talked with another individual who has installed these units
for years. He suspected my thermostat was defective. 4 different people
tried everything from new batteries to multiple resets . No joy.

Believe it or not, Sometimes, a defective product does get pass quality
control. Or, maybe damaged during shipping?

You take care,

James B
P.S. I want to express my appreciation to all here who contributed their
time and effort to assist those of us who were having problems with the VIP
3000.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Ann
Parsons
Sent: Thursday, January 30, 2020 7:19 AM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

Hi James,

I hear you. Seems a good solution, though judging from the discussion
here, you needn't have sent it back.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."


Re: the VIP thermostat

Ann Parsons
 

Hi James,

I hear you. Seems a good solution, though judging from the discussion here, you needn't have sent it back.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."


Re: the VIP thermostat

Ann Parsons
 

Hi all,

<smiling> Vindicated! This is one of the reasons why one should try not to react to problems but to act by finding solutions. I'll bet that this setting, mentioned below, was improperly configured and it could have been fixed with a small bit of trouble. Calling the manufacturer would have been a way to obtain this information.

Sorry, but having experienced what happens when one reacts instead of acting, I can assure you that the second course pays much better dividens.

Ann P.


Original message:


Hi Troy,
It sounds like your cycle / split rate needs to be looked at. This controls when the AC or Heat starts & stops. If your set thermostat temperature is 75º for the AC and the split rate is set at 4, then the AC will start when the room temperature is 2º above set temperature and shut off when the room temperature hits 2º below set temperature.
For heat, if the Thermostat is set at 75º and split rate is 4 the heat will come on at 2º below set temperature and shut off at 2º above set temperature.
Take care. Mike. Sent from my iBarstool.
--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."


Re: the VIP thermostat

Mike B
 


Hi Andy,
 
The only way I know of is to run the thermostat in manual mode, all programs turned off, but you would have to switch from AC to Heat manually which you have to do anyways.  But, let's say you wanted to have the stat on 75º, and if your cycle / split rate is at 1, 2, or whatever you wouldn't stay at a constant 75º anyways, it'll always fluctuate according to the cycle / split rate.  It's better to have the, economically speaking anyways,  cycle / split rate set on, 2, to give a combination of comfort and not kicking the system off / on too often.

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----
Sent: Wednesday, January 29, 2020 7:46 PM
Subject: Re: [TechTalk] the VIP thermostat

Hello Mike, I have a question for you. Is there any way to lock the temperature so it can’t be changed ? I haven’t found anything in the book about that feature.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: Wednesday, January 29, 2020 10:01 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

 

Hi Troy,

 

It definitely takes being able to see to change the cycle / split rate.  Do you have the manual or CD that came with the thermostat?  I can send you steps, but if I were you I would choose the cycle / split rate to be set at 2.  I explained the using a 4 split, but the default is supposed to be 2.

 

Below is a direct Dropbox link for a folder with several notes I've made  along with the files from the book and CD that come with the VIP thermostat.

 


 

 

Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Troy Burnham

Sent: Wednesday, January 29, 2020 3:52 PM

Subject: Re: [TechTalk] the VIP thermostat

 

Mike,

Can we adjust that without professional help? Meaning do we need to call the company that installed the thermostat and have them do this?

Troy

On 1/29/2020 3:38 PM, Mike B wrote:



Hi Troy,

 

It sounds like your cycle / split rate needs to be looked at.  This controls when the AC or Heat starts & stops.  If your set thermostat temperature is 75º for the AC and the split rate is set at 4, then the AC will start when the room temperature is 2º above set temperature and shut off when the room temperature hits 2º below set temperature.

 

For heat, if the Thermostat is set at 75º and split rate is 4 the heat will come on at 2º below set temperature and shut off at 2º above set temperature.


Take care.  Mike.  Sent from my iBarstool.

----- Original Message -----

From: Troy Burnham

Sent: Wednesday, January 29, 2020 12:28 PM

Subject: Re: [TechTalk] the VIP thermostat

 

I had my thermostat installed by a guy who works at an air conditioner
installation company because I figured he'd know how to do it.

I forgot to mention in my original note that we also looked up the
jumper switch settings in the manual and made sure they were correct.

Troy



On 1/29/2020 11:41 AM, Peter Spitz wrote:
> I've had my VIP 3000 for over three years and haven't had any problems
> with it.  I wonder if yours was installed improperly?   I paid an
> electrician to install it and he had to rewire something to get it to
> work properly but it does work flawlessly after the professional
> installation.
>
>
>


 


Re: the VIP thermostat

James Bentley
 

Good evening Ann,

The problem goes way beyond recalubration of the thermostat which was one of many different things that was tried.

Ann, I was stuck with a 9 degree temperature range no matter what I set the thermostat at. Recalubrating the unit just changed the thermostats readings without altering the temperature range for cycleing the heat onn and off. For example, if I tried setting the thermostat at 65 like you suggested, then, I would spend a lot of time being too cold just to keep from being too hot.

I now have my old thermostat installed again. It is set at 74. The heat turns on at 73 and off at 76. This range of 3 degrees means that I am always just right. A 9 degrees range is just too far apart to not be to cold or too hot or, actually, cycleing in between both.

Of course I phoned the seller 2 times. Of course I consulted the owners manual. I also consulted with an experienced heating and cooling installer who by the way, said that he believed that my thermostat was defective.

Judgeing from all of the emails that I have seen on different list concerning these VIP 3000's, Some of these thermostats are just not working right while others are working fine. i have no way of knowing if some of these devices are defective or if some of us have units that are installed by inexperienced installers. My personal opinion of our current 2 maintenance men is that they are both extremely proficient at their jobs which probably means that my thermostat wasn't functioning right. I would love to have the convenience that the VIP 3000 offers if only it can keep the temperature range within 3 or so degrees.

Take care,

James B

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Ann Parsons
Sent: Wednesday, January 29, 2020 2:55 PM
To: main@techtalk.groups.io
Subject: Re: [TechTalk] the VIP thermostat

Hi all,

If you knew that the thermostat was nine degrees off, why didn't you
just set it for sixty-five and write to the company to see if there
was a way to recalibrate the thing? That's throwing out the baby with
the bath water. If there wasn't a way to recalibrate the thing, then
just set it for sixty-five and forget it! Having a talking thermostat
would seem to be more important than nine degrees of temperature.
<sigh> Maybe I have too much common sense? I have a tactile
thermostat here that was installed by RG&E ages ago. Mine runs a bit
low, so I set the thing higher and it makes the house the way I like it.


Ann P.


Original message:
hi,
I GOT A NEW VIP 3000 12 days ago for my electric heating and air. The
AC worked fine. The heat wouldn't shut off until the room temp reach 4
to 9 degrees above what it was set at. For example, if I set the heat
to 75, it would sometimes heat up to 84 before shutting down the heat.
I sent the piece of junk back. It’s a great idea if they get the bugs
out before they start selling the device to customers. Especially
since it cost $300 bucks.
James B

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Troy Burnham
Sent: Wednesday, January 29, 2020 9:45 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] the VIP thermostat
Hi all,
I bought a new VIP thermostat I think in late 2018, and I even had it
replaced a little later but both thermostats have done the same thing
and I was wondering if anybody else has experienced this. When the air
conditioner is being used everything seems to be okay, but with the heat
we may have the thermostat set on 75 degrees but when the unit comes on
when it gets below 75 it won't go back off until the thermostat
registers several degrees above 75. It usually doesn't feel as warm as
the thermostat claims but at times the unit stays on longer than it
seems like it would need to, and at other times we can turn the heat on
and 10 or 20 seconds later the thermostat clicks signifying the unit is
turning off. It has to be the thermostat causing this problem because we
just had the AC/heating unit changed last summer. Btw it's an electric
central system. Has anybody else experienced this behavior with the VIP?
Thanks.
Troy





--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@...
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."