Date   

Emerson reader

Fred Adams <w4hc@...>
 

Thanks to all that gave me info on the emerson reader. I think I am good to
go now.

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME


Re: Test message

Fred Adams <w4hc@...>
 

Please disregard my last message. My problem was in my filter settings.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Fred
Adams
Sent: Saturday, September 26, 2020 7:57 PM
To: talk group <main@TechTalk.groups.io>
Subject: [TechTalk] Test message

When I bring up the tech talk list jaws says that I have ten messages but
when I open up the list jaws says that I have zero messages. I have checked
every setting that I can think of several times but no luck. I would
appreciate any suggestions. I am using Win 10, jaws 2021 beta and outlook
2019. Since I am seeing no messages I might not be able to see any response
to this message. Inbox and other group list are working fine so far.

Thanks much,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME


best MVNO plans?

enes sarıbaş
 

Hi all,

So I am currently using Metro By Tmobile's 30 dollars per month cheapest plan, which only encludes 2 gb of data, and doesn't support features like call waiting, conference calls etc. However, my research indicates that I could probably save more and get more perks and data on other MVNOs. Does anyone have recommendations for this? Mint mobile sounds apealing with its 3gb plan. For clerification, I do all data intensive activities off celular and on wi fi. All I need celular for is video calls, since my DSL is far too slow to support those, as well as voice calls and checking e-mail, and sending and receiving voice and text messages.


Test message

Fred Adams <w4hc@...>
 

When I bring up the tech talk list jaws says that I have ten messages but
when I open up the list jaws says that I have zero messages. I have checked
every setting that I can think of several times but no luck. I would
appreciate any suggestions. I am using Win 10, jaws 2021 beta and outlook
2019. Since I am seeing no messages I might not be able to see any response
to this message. Inbox and other group list are working fine so far.

Thanks much,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME


Re: Emerson reader

chris judge
 

Yes it works great now. Things have changed since I posted that info. Glad to see the f9 key works again.

 

Chris Judge

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Mike B
Sent: September 25, 2020 8:07 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Emerson reader

 

Hi Loy,

 

Thank you for the update.  It's a keeper for sure.


Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----

From: Loy

Sent: Friday, September 25, 2020 3:48 PM

Subject: Re: [TechTalk] Emerson reader

 

I am using the latest  version of the new MS Edge with JAWS and when I go to a site where the Emersive Reader is available JAWS will announce that Emersive Reader is available, then press F9 and the page is reformatted and if you wish to use read aloud press control shift U and the read aloud voice will read the page  control shift U is a toggle to stop  start the read aloud.

----- Original Message -----

From: Mike B

Sent: Friday, September 25, 2020 5:37 PM

Subject: Re: [TechTalk] Emerson reader

 

Howdy Fred,

 

See if this thread will help you any.  These notes are older, but hope they help a little anyways.

 

Note:  The Emersive Reader doesn't work in the Stable version, only the Developer versions.
 
From: chris judge
Hi. If you are on a page where the immersive reader is available, press Alt D. this will move you to the address field. Tabbing once from here will land
you on the enter immersive reader button if it is available. Press spacebar to enter immersive reader.
Chris
 
From: chris judge
The f9 key does not work any more. The easiest way to enable the immersive reader is to press altD then tab once to the immersive reader button. Press
spacebar to enable.
Chris
 
From:
Sieghard Weitzel
If you are  using the Stable version it won't work, but the dev version where F9 apparently works, do this:

 


1. After the web page loads press Alt + D, this will take you to the address bar

 

2. Tab once, if the Immersive Reader is available, you will hear, “Enter Immersive Reader”

 

3. Press spacebar or enter to activate the button, the web page is reformatted and you can now read it without almost all of the clutter you normally find. 

 

If you want to exit immersive reader just repeat the above steps, it will say “Exit Immersive Reader” when you get to the button. It’s a very simply 2-step
key combination followed by enter or spacebar to activate.

 

Sieghard

 

From:  Brian Vogel
On Sun, Apr 12, 2020 at 07:49 AM, chris judge wrote:

 

The f9 key does not work any more.

 

It certainly does on all the recent dev versions, so if there was a stable or beta version where it accidentally got knocked out it will be coming back.

 

I agree that it's always worth knowing you can throw focus to the address bar with ALT+D, then tab once to the Immersive Reader button, if it's present
for a given page.
Brian 

 

From: Dennis L
The correct statement would’ve been f9 doesn’t work in the stable version.  That will be fixed when the stable gets up to version 81 something.  It most
certainly works in developer builds.
Dennis
 


Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----

From: Fred Adams

Sent: Friday, September 25, 2020 12:48 PM

Subject: [TechTalk] Emerson reader

 

I would appreciate it very much if someone would give me info on how to
start emerson reader from talking and how to stop the reader from talking.
Also, I would appreciate it very much if someone would send me list of
emerson shortcut keys.  I thought I had this info but I must somehow deleted
it.

Thanks for any help,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME






Re: accessible disk imaging software.

Gerald Levy
 


Are there any podcasts that demonstrate how to create this magical talking PE disk, plus a demonstration of how to use it to restore a backup image from an external hard drive without sighted help of any kind? The owner/moderator of the defunct JAWS Users email list, David Ferrin, who has apparently vanished into the ether, created a podcast on his Help page that demonstrated how to use Image for Windows with a series of CD's to restore a backup image, but this was years ago before he shut down the list and help site, and Image for Windows is apparently a much different program now.  


Gerald



On 9/26/2020 4:49 AM, Smiling? wrote:

You are unfortunately wrong, it’s completely accessible. It’s you the user, who needs to know how to access these accessibilities with speech by using Windows PE with speech along with a portable version of Image for Windows as was already mentioned.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gerald Levy via groups.io
Sent: Friday, September 25, 2020 3:05
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] accessible disk imaging software.

 

 

Here's the bottom line.  There is no inmaging program that is completely accessible.  Macrium Reflect is accessible only for creating the backup image on an external hard drive.  But sighted assistance is needed to restore this image because there is no speech available during the restoration procedure.  This is true of all imaging programs; the backup procedure may be accessible, but sighted help is almost certainly needed to restore the saved image. 

 

Gerald

 

 

On 9/25/2020 4:04 AM, Akash Kakkar wrote:

Ya bro, that's the problematic thing about Image for windows. Otherwise, I liked it's interface but left it due to the lack of incremental backups. actually I've tried tons of Imaging solutions but none is properly accessible.

On 9/25/2020 1:20 PM, Smiling? wrote:

Interesting, I was thinking that Image for Windows could successfully create incremental backups, but apparently you are correct, it only does full and differential backups because of incremental backups tending to be troublesome.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Akash Kakkar
Sent: Friday, September 25, 2020 0:27
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] accessible disk imaging software.

When I last checked, incremental backups were not available in image for windows.

On 9/25/2020 12:51 PM, Smiling? wrote:

Image for Windows:

https://www.terabyteunlimited.com/image-for-windows.htm


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Austin Pinto
Sent: Thursday, September 24, 2020 21:51
To: access-uk@...
Subject: [TechTalk] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest






















Re: searching BARD Express

Ann Parsons
 

Hi all,

You can type whatever keyword you want in the search field of BEX. Don't know why you're thinking you can only search by title.

From main menu, press ctrl-s and type in the author's name, lastname
first e.g. Weber, David. You can search by book number too.

Ann P.

--
Ann K. Parsons
Portal Tutoring
EMAIL: akp@sero.email
Author of The Demmies: http://www.dldbooks.com/annparsons/
Portal Tutoring web site: http://www.portaltutoring.info
Skype: Putertutor

"All that is gold does not glitter,
Not all those who wander are lost."


Re: accessible disk imaging software.

Smiling?
 

You are unfortunately wrong, it’s completely accessible. It’s you the user, who needs to know how to access these accessibilities with speech by using Windows PE with speech along with a portable version of Image for Windows as was already mentioned.

 

From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Gerald Levy via groups.io
Sent: Friday, September 25, 2020 3:05
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] accessible disk imaging software.

 

 

Here's the bottom line.  There is no inmaging program that is completely accessible.  Macrium Reflect is accessible only for creating the backup image on an external hard drive.  But sighted assistance is needed to restore this image because there is no speech available during the restoration procedure.  This is true of all imaging programs; the backup procedure may be accessible, but sighted help is almost certainly needed to restore the saved image. 

 

Gerald

 

 

On 9/25/2020 4:04 AM, Akash Kakkar wrote:

Ya bro, that's the problematic thing about Image for windows. Otherwise, I liked it's interface but left it due to the lack of incremental backups. actually I've tried tons of Imaging solutions but none is properly accessible.

On 9/25/2020 1:20 PM, Smiling? wrote:

Interesting, I was thinking that Image for Windows could successfully create incremental backups, but apparently you are correct, it only does full and differential backups because of incremental backups tending to be troublesome.

-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of Akash Kakkar
Sent: Friday, September 25, 2020 0:27
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] accessible disk imaging software.

When I last checked, incremental backups were not available in image for windows.

On 9/25/2020 12:51 PM, Smiling? wrote:

Image for Windows:

https://www.terabyteunlimited.com/image-for-windows.htm


-----Original Message-----
From: main@TechTalk.groups.io <main@TechTalk.groups.io> On Behalf Of
Austin Pinto
Sent: Thursday, September 24, 2020 21:51
To: access-uk@...
Subject: [TechTalk] accessible disk imaging software.

hi all.
i require an accessible disk imaging software that can backup and restore windows 10 and data and also has incrimental and differencial backup features.
i used to use active@disk image but it doesnt restore windows 10 properly.
please suggest






















searching BARD Express

Vicki W
 

Hi,
 
Is there any way to search by author using BARD Express? I seem to only be able to search by title.
 
Thanks.
 
Vicki
   


Re: Accessible Electronics Mailing List: What Is The Status?

Laz
 

Hi Ron,

I don't know what email address you used to send your message to the
group owner,. but I have yet to receive any messages from you. As
someone who had ordered from us i sent you an invitation to our
announcement only email list.

The description of this group as shown on the group's home page is the
following,

AccessibleElectronics AccessibleElectronics@groups.io
Providing our customers current information about our accessible
devices and weekly specials.

I send one maybe two, messages a week.

I hope that clears it up for you.

Stay safe,

Laz

On 9/25/20, Ron Canazzi <aa2vm@roadrunner.com> wrote:
Hi Group,

Two days ago, I received an invitation from The Accessible Electronics
Mailing List. It sounded like a good group to join. I joined it. I
created a folder and I configured a filter and sent two test messages.
I did not get the messages. I did not receive them. I then sent a
message to the owners inquiring of the status. I heard nothing.

Does anyone know what is going on with this group? Thanks for any help.


They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"







--
Affordably priced Accessible Talking MP3 Player/book Reader, Victor
Reader Stream & Trek, blindshell Classic phone, Bluetooth devices, and
accessories
http://www.talkingmp3players.com/
Email: laz@talkingmp3players.com
Phone: 727-498-0121
Personal Facebook: https://m.facebook.com/laz.mesa
Facebook: https://m.facebook.com/Talkingmp3players?_rdr


Accessible Electronics Mailing List: What Is The Status?

Ron Canazzi
 

Hi Group,

Two days ago, I received an invitation from The Accessible Electronics Mailing List.  It sounded like a good group to join.  I joined it. I created a folder and I configured a filter and sent two test messages.  I did not get the messages.  I did not receive them.  I then sent a message to the owners inquiring of the status. I heard nothing.

Does anyone know what is going on with this group?  Thanks for any help.


 They Ask Me If I'm Happy; I say Yes.
They ask: "How Happy are You?"
I Say: "I'm as happy as a stow away chimpanzee on a banana boat!"


Re: Emerson reader

Mike B.
 

Hi Loy,
 
Thank you for the update.  It's a keeper for sure.

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!

----- Original Message -----
From: Loy
Sent: Friday, September 25, 2020 3:48 PM
Subject: Re: [TechTalk] Emerson reader

I am using the latest  version of the new MS Edge with JAWS and when I go to a site where the Emersive Reader is available JAWS will announce that Emersive Reader is available, then press F9 and the page is reformatted and if you wish to use read aloud press control shift U and the read aloud voice will read the page  control shift U is a toggle to stop  start the read aloud.
----- Original Message -----
From: Mike B
Sent: Friday, September 25, 2020 5:37 PM
Subject: Re: [TechTalk] Emerson reader

Howdy Fred,
 
See if this thread will help you any.  These notes are older, but hope they help a little anyways.
 
Note:  The Emersive Reader doesn't work in the Stable version, only the Developer versions.
 
From: chris judge
Hi. If you are on a page where the immersive reader is available, press Alt D. this will move you to the address field. Tabbing once from here will land
you on the enter immersive reader button if it is available. Press spacebar to enter immersive reader.
Chris
 
From: chris judge
The f9 key does not work any more. The easiest way to enable the immersive reader is to press altD then tab once to the immersive reader button. Press
spacebar to enable.
Chris
 
From:
Sieghard Weitzel
If you are  using the Stable version it won't work, but the dev version where F9 apparently works, do this:
 

1. After the web page loads press Alt + D, this will take you to the address bar
 
2. Tab once, if the Immersive Reader is available, you will hear, “Enter Immersive Reader”
 
3. Press spacebar or enter to activate the button, the web page is reformatted and you can now read it without almost all of the clutter you normally find. 
 
If you want to exit immersive reader just repeat the above steps, it will say “Exit Immersive Reader” when you get to the button. It’s a very simply 2-step
key combination followed by enter or spacebar to activate.
 
Sieghard
 
From:  Brian Vogel
On Sun, Apr 12, 2020 at 07:49 AM, chris judge wrote:
 
The f9 key does not work any more.
 
It certainly does on all the recent dev versions, so if there was a stable or beta version where it accidentally got knocked out it will be coming back.
 
I agree that it's always worth knowing you can throw focus to the address bar with ALT+D, then tab once to the Immersive Reader button, if it's present
for a given page.
Brian 
 
From: Dennis L
The correct statement would’ve been f9 doesn’t work in the stable version.  That will be fixed when the stable gets up to version 81 something.  It most
certainly works in developer builds.
Dennis
 

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
From: Fred Adams
Sent: Friday, September 25, 2020 12:48 PM
Subject: [TechTalk] Emerson reader

I would appreciate it very much if someone would give me info on how to
start emerson reader from talking and how to stop the reader from talking.
Also, I would appreciate it very much if someone would send me list of
emerson shortcut keys.  I thought I had this info but I must somehow deleted
it.

Thanks for any help,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME







Re: Emerson reader

Loy <loyrg2845@...>
 

I am using the latest  version of the new MS Edge with JAWS and when I go to a site where the Emersive Reader is available JAWS will announce that Emersive Reader is available, then press F9 and the page is reformatted and if you wish to use read aloud press control shift U and the read aloud voice will read the page  control shift U is a toggle to stop  start the read aloud.

----- Original Message -----
From: Mike B
Sent: Friday, September 25, 2020 5:37 PM
Subject: Re: [TechTalk] Emerson reader

Howdy Fred,
 
See if this thread will help you any.  These notes are older, but hope they help a little anyways.
 
Note:  The Emersive Reader doesn't work in the Stable version, only the Developer versions.
 
From: chris judge
Hi. If you are on a page where the immersive reader is available, press Alt D. this will move you to the address field. Tabbing once from here will land
you on the enter immersive reader button if it is available. Press spacebar to enter immersive reader.
Chris
 
From: chris judge
The f9 key does not work any more. The easiest way to enable the immersive reader is to press altD then tab once to the immersive reader button. Press
spacebar to enable.
Chris
 
From:
Sieghard Weitzel
If you are  using the Stable version it won't work, but the dev version where F9 apparently works, do this:
 

1. After the web page loads press Alt + D, this will take you to the address bar
 
2. Tab once, if the Immersive Reader is available, you will hear, “Enter Immersive Reader”
 
3. Press spacebar or enter to activate the button, the web page is reformatted and you can now read it without almost all of the clutter you normally find. 
 
If you want to exit immersive reader just repeat the above steps, it will say “Exit Immersive Reader” when you get to the button. It’s a very simply 2-step
key combination followed by enter or spacebar to activate.
 
Sieghard
 
From:  Brian Vogel
On Sun, Apr 12, 2020 at 07:49 AM, chris judge wrote:
 
The f9 key does not work any more.
 
It certainly does on all the recent dev versions, so if there was a stable or beta version where it accidentally got knocked out it will be coming back.
 
I agree that it's always worth knowing you can throw focus to the address bar with ALT+D, then tab once to the Immersive Reader button, if it's present
for a given page.
Brian 
 
From: Dennis L
The correct statement would’ve been f9 doesn’t work in the stable version.  That will be fixed when the stable gets up to version 81 something.  It most
certainly works in developer builds.
Dennis
 

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
From: Fred Adams
Sent: Friday, September 25, 2020 12:48 PM
Subject: [TechTalk] Emerson reader

I would appreciate it very much if someone would give me info on how to
start emerson reader from talking and how to stop the reader from talking.
Also, I would appreciate it very much if someone would send me list of
emerson shortcut keys.  I thought I had this info but I must somehow deleted
it.

Thanks for any help,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME







Re: Emerson reader

Mike B.
 

Howdy Fred,
 
See if this thread will help you any.  These notes are older, but hope they help a little anyways.
 
Note:  The Emersive Reader doesn't work in the Stable version, only the Developer versions.
 
From: chris judge
Hi. If you are on a page where the immersive reader is available, press Alt D. this will move you to the address field. Tabbing once from here will land
you on the enter immersive reader button if it is available. Press spacebar to enter immersive reader.
Chris
 
From: chris judge
The f9 key does not work any more. The easiest way to enable the immersive reader is to press altD then tab once to the immersive reader button. Press
spacebar to enable.
Chris
 
From:
Sieghard Weitzel
If you are  using the Stable version it won't work, but the dev version where F9 apparently works, do this:
 
 
1. After the web page loads press Alt + D, this will take you to the address bar
 
2. Tab once, if the Immersive Reader is available, you will hear, “Enter Immersive Reader”
 
3. Press spacebar or enter to activate the button, the web page is reformatted and you can now read it without almost all of the clutter you normally find. 
 
If you want to exit immersive reader just repeat the above steps, it will say “Exit Immersive Reader” when you get to the button. It’s a very simply 2-step
key combination followed by enter or spacebar to activate.
 
Sieghard
 
From:  Brian Vogel

On Sun, Apr 12, 2020 at 07:49 AM, chris judge wrote:
 
The f9 key does not work any more.
 
It certainly does on all the recent dev versions, so if there was a stable or beta version where it accidentally got knocked out it will be coming back.
 
I agree that it's always worth knowing you can throw focus to the address bar with ALT+D, then tab once to the Immersive Reader button, if it's present
for a given page.
Brian 
 
From: Dennis L
The correct statement would’ve been f9 doesn’t work in the stable version.  That will be fixed when the stable gets up to version 81 something.  It most
certainly works in developer builds.
Dennis
 

Take care and stay safe.  Mike.
Sent from my iBarstool.  Go dodgers!
----- Original Message -----
From: Fred Adams
Sent: Friday, September 25, 2020 12:48 PM
Subject: [TechTalk] Emerson reader

I would appreciate it very much if someone would give me info on how to
start emerson reader from talking and how to stop the reader from talking.
Also, I would appreciate it very much if someone would send me list of
emerson shortcut keys.  I thought I had this info but I must somehow deleted
it.

Thanks for any help,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME







Re: MP3 Direct Cut Splitting with Cue Marks

Gene
 

I still see little or no difference. If I used split points, there may be something I don't know that might change my mind, but at this point, I see no meaningful difference between naming something as I save it such as 01 Back in the U..S.S.R. or entering almost the same information using control n at the split point.

Gene

-----Original Message-----
From: Vaddy
Sent: Friday, September 25, 2020 3:35 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] MP3 Direct Cut Splitting with Cue Marks

In general, this is not necessary. You may enter a track name with
Ctrl-N at every split point or at the beginning of file. Then, on
invoking Save Split dialog, change track name template to e.g. %N-%T and
to create two-digit track numbers, enter '01' instead of '1' in the '%N
begins with:' field.


On 25.09.2020 22:33, Gene wrote:
I don't see you saving time or trouble. Don't you then have to rename all the tracks after you save them? You still have to set all the cue points, then after the tracks are saved go to each one and use f2 to rename them.


Re: MP3 Direct Cut Splitting with Cue Marks

Vaddy
 

In general, this is not necessary. You may enter a track name with Ctrl-N at every split point or at the beginning of file. Then, on invoking Save Split dialog, change track name template to e.g. %N-%T and to create two-digit  track numbers, enter '01' instead of '1' in the '%N begins with:' field.

On 25.09.2020 22:33, Gene wrote:
I don't see you saving time or trouble.  Don't you then have to rename all the tracks after you save them?  You still have to set all the cue points, then after the tracks are saved go to each one and use f2 to rename them.


Emerson reader

Fred Adams <w4hc@...>
 

I would appreciate it very much if someone would give me info on how to
start emerson reader from talking and how to stop the reader from talking.
Also, I would appreciate it very much if someone would send me list of
emerson shortcut keys. I thought I had this info but I must somehow deleted
it.

Thanks for any help,

FRED C. ADAMS W4HC
US ARMY ABN RET
ETERNITY ETERNITY AVERY LONG TIME


Re: MP3 Direct Cut Splitting with Cue Marks

Gene
 

I don't see you saving time or trouble. Don't you then have to rename all the tracks after you save them? You still have to set all the cue points, then after the tracks are saved go to each one and use f2 to rename them.

Gene

-----Original Message-----
From: Vaddy
Sent: Friday, September 25, 2020 1:25 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] MP3 Direct Cut Splitting with Cue Marks

This way you have to save each track one by one which for me is tedious
enough. To put a cue splitting point, get to desired place, put either a
beginning or end of selection mark and then press Delete or C key. After
putting all cue points, go to File -> Save Split or press Ctrl-T and
change track name or ID3 tag templates if necessary. The tracks will
then be saved all at once.


On 25.09.2020 2:11, Gene wrote:
I've never bothered with cue points. I don't know if one method is faster and easier than the other, but I manually set markers, then do what I want to do with whatever is between them.

If you want to save all the songs in an album in separate files, you can do the following:
First, remove any blank space or space at the beginning of the file containing audio.
Set the start marker at the beginning of the file with b. Move to where you want the file to begin and press n to set the end marker. Then press the delete key.
Now, set the start marker again at the beginning of the file. This would be the first song, in this case.
Move to the end of the song and set the end marker.
Now use the save selected option to save the song.
The command is control e. Write the name you want to give the song and press enter.
The song will be saved. After you save it, delete it with the delete key.
Now set the start marker at the beginning of the file again.
I am assuming that there is some blank space between songs. Move to the start of the song, set the end marker just before the beginning, and delete.
Now follow the procedure I outlined above.

I haven't described how


Re: need help hooking up a wifi extender

Norman
 

Hi.

You don't need a wire.

Follow the instructions here.

https://rerockspace-local.com/setup-rockspace-ac750-extender/

Basically, power it on, connect your laptop or phone, connect to the extender with a web browser, and follow the prompts. The link above gives you more details.

On 9/25/2020 2:10 PM, Troy Burnham wrote:
Hi all,

I bought and just received a Rockspace AC750 dual band wifi repeater. I have charged it and now I'm trying to make it work, but one part of the instructions says to hook the router to the repeater but it doesn't say with what. I assume it's a cord but my mom says there are several cords that are plugged into my router and we don't know what any of them are. Can anybody describe the cord we're looking for, including the color if possible?

Thanks.

Troy






Re: MP3 Direct Cut Splitting with Cue Marks

Vaddy
 

This way you have to save each track one by one which for me is tedious enough. To put a cue splitting point, get to desired place, put either a beginning or end of selection mark and then press Delete or C key. After putting all cue points, go to File -> Save Split or press Ctrl-T and change track name or ID3 tag templates if necessary. The tracks will then be saved all at once.

On 25.09.2020 2:11, Gene wrote:
I've never bothered with cue points.  I don't know if one method is faster and easier than the other, but I manually set markers, then do what I want to do with whatever is between them.

If you want to save all the songs in an album in separate files, you can do the following:
First, remove any blank space or space at the beginning of the file containing audio.
Set the start marker at the beginning of the file with b.  Move to where you want the file to begin and press n to set the end marker.  Then press the delete key.
Now, set the start marker again at the beginning of the file. This would be the first song, in this case.
Move to the end of the song and set the end marker.
Now use the save selected option to save the song.
The command is control e.  Write the name you want to give the song and press enter.
The song will be saved.  After you save it, delete it with the delete key.
Now set the start marker at the beginning of the file again.
I am assuming that there is some blank space between songs.  Move to the start of the song, set the end marker just before the beginning, and delete.
Now follow the procedure I outlined above.

I haven't described how

8781 - 8800 of 101640