Date   

Re: The Listen Factor

Christina Stolze
 

Carlos,

Thank you very much for the information. The listenfactor is great I am loving and enjoying it when I get a chance to listen to it on my victor reader stream. Have a great day.

Christina

 

From: Carlos [mailto:carlos1106@...]
Sent: Sunday, September 06, 2015 2:08 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] The Listen Factor

 

Hi Christina,

You can find Blindy.TV here.

Although it seems to be down at the moment.

----- Original Message -----

Sent: Sunday, September 06, 2015 9:52 AM

Subject: Re: [TechTalk] The Listen Factor

 

Carlos,

As a matter of fact I subscribed to it. I am also interested in more information about blindy. Please and thank you.

Christina

 

From: Carlos [mailto:carlos1106@...]
Sent: Sunday, September 06, 2015 8:14 AM
To: TechTalk@groups.io
Subject: [TechTalk] The Listen Factor

 

    Has anyone seen this website?

They have 7 channels of streaming audio for various television programs.  Similar to Blindy.TV I guess.  I found it posted at Blind Bargains while creating a classified for the list.

 




Re: CLCL - Clipboard manager updated after 10 years

Rick Alfaro
 

Chris, I've been using ClipMate for ywars now. It's very accessible as it
recognizes the screen reader flag. I use it more as an information database.
I have different folders for various types of information.
www.clipmate.com


Best regards,

Rick Alfaro

-----Original Message-----
From: Chris G [mailto:jedikent@mysticaccess.email]
Sent: Saturday, September 5, 2015 12:49 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] CLCL - Clipboard manager updated after 10 years

Funny, I was just about to write an email asking if anyone knew of any
good accessible clipboard managers.

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


On Sat, 5 Sep 2015 11:21:52 -0400
"Carlos" <carlos1106@nyc.rr.com> wrote:

For anyone who is not familiar with it, CLCL
http://www.nakka.com/soft/index_eng.html
is a powerful and advanced clipboard manager. Despite the fact that until
yesterday the program had not been updated in over 10 years, it has always
been quite stable and worked very well on all versions of Windows including
10. The latest version does not seem to have any obvious new features as
far as I can tell, but if nothing else it should at least run even more
smoothly on newer editions of Windows therefore increasing it's lifespan.
Note this program has many advanced features and may not be suitable for the
average user. It does not even include any documentation. Despite this
fact, many of it's users have referred to it as one of the most powerful
clipboard managers.

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


Attempting to subscribe to a specific podcast

jldail13@...
 

Hi
I found a podcast I want to subscribe to, but icatcher; my podcast player of choice, says the link is invalid.
I have emailed the developer, and I'm waiting for response. In the meantime, I was wondering if one of you guys could help me.
How could I subscribed to this podcast?
Here's the link,


Thanks,
Jessica


Sent from my iPhone


Re: original messages was: Carlos: via sound card software package

Gene
 

Your program already is set to include previous messages.  Look below your message, the one you sent the list and you will see previous messages.  If you want to know how to change this setting, we need to know which e-mail program you are using.  The setting cannot be assumed to be in the same place in different programs.
 
Gene

Sent: Sunday, September 06, 2015 1:06 PM
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

That is all well and good but I haven’t a clue on how to do that. I am not that good with the computer I am that novice who is afraid to break things and sometimes the intermediate computer user. If you can assist me in how to do that I would appreciate that for the most part I don’t really have too much to say because I would rather listen to learn but once in a while I might like to respond to ask for more information or something along those lines. Have a great day.

Christina

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Sunday, September 06, 2015 1:35 PM
To: TechTalk@groups.io
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

 

If everyone would set their email clients to include messages in their replies, this would keep late comers to any particular thread up to speed as well.

Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers!

----- Original Message -----

From: Flor Lynch

Sent: Sunday, September 06, 2015 7:56 AM

Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

 

Not everybody will do this. So it'd be better to ask people when posting
replies to make sure that they also send enough information in their replies
about the original message that they're responding to.

-----Original Message-----
From: rajmund
Sent: Sunday, September 06, 2015 3:49 PM
To: TechTalk@groups.io
Subject: original messages was: [TechTalk] Carlos: via sound card software
package

Hi all,
Please, this is a good example why we should try and keep the original
messages.

----- Original Message -----
>From: Carlos <carlos1106@...>
To: TechTalk@groups.io
Date: Saturday, 5 September 2015 9:31 pm
Subject: Re: [TechTalk] Carlos: via sound card software package

>
>
> Hi Bill,
> Your message does not seem to contain the reply I posted so I'm not even
> quite sure what I said.
> ----- Original Message -----
> From: "Bill Koppelmann" <billmeister@...>
> To: <TechTalk@groups.io>
> Sent: Saturday, September 05, 2015 12:36 PM
> Subject: [TechTalk] Carlos: via sound card software package
>
>
> > Hi Carlos,
> > Ok, if what you're saying is correct, then why can't I suddenly not get
> > any sound out of my headphone jack. I've not yet gotten to your message
> > about using usb headphones, but I'll be reading it soon. Perhaps that
> > might resolve my problem?
> > thanks,
> > Bill
> >
> >
> >
>
>
>
>

Sent from a Braille Sense







Re: converting PDF and retaining paragraph format

Gene
 

but it appears that your procedure deletes all hard returns.  That is not what is wanted.  Paragraph divisions are still wanted.  The problem is that every soft return is made into a hard return.  The point is not to delete all hard returns.  The point is to have soft returns except where paragraphs begin. 
 
If you convert any document from a word processor or html format to a txt format, all soft returns will be converted into hard returns.  There is no soft return in the txt character set, if that is the correct term.  But if you convert the file to a word processor format and the same thing occurs, that is, all soft returns are converted to hard returns, then the subject should be discussed further.  If a word processor format retains soft returns, that should solve the problem. 
 
Gene

----- Original Message -----
From: Flor Lynch
Sent: Sunday, September 06, 2015 1:02 PM
Subject: Re: [TechTalk] converting PDF and retaining paragraph format

One might also want to delete right parentheses, apostrophes, and some other punctuation marks just  preceding hard returns, such as: )^zzz with )^n; ‘zzz with ‘^n; !zzz with !^n; ?zzz with ?^n, (in step 5 per the scheme below).
 
From: Flor Lynch
Sent: Sunday, September 06, 2015 5:51 PM
Subject: Re: [TechTalk] converting PDF and retaining paragraph format
Hi Dean,
 
This is what I did, and it seemed to work:
 
1. Converted the pdf to text.
 
2. Select All in the text ffile, copy to clipboard. 
 
3. Open a blank document in Microsoft Word. 
3A: Paste the clipboard contents into the Word document.
 
4. Now we’re going to do Finding and Replacing, and the Special Characters dialogue, More... button. Find: ^n . Replace with: zzz . REPLACE ALL Button, and ENTER.
 
5. Find: .zzz . Replace With: .n . Replace All.
 
5A:  (If necessary, Find and Replace All . zzz with . ^n ....
 
6. Now, Find and Replace ALL zzz with nothing, leaving the replacement field empty.
 
7. You may require more finding and replacing, use judiciously.
 
HTH, and Good Luck!
 
Sent: Sunday, September 06, 2015 3:55 PM
Subject: [TechTalk] converting PDF and retaining paragraph format

I like to convert PDF documents to other formats, usually text but could be any of several others.  When I use the conversion routine built into Adobe Reader, all the line breaks are converted into hard line breaks, making it hard to find the actual paragraph boundaries.  Does anybody have a solution to this?

 

Dean

 

 

 

http://bahaiteachings.org/

 

 


Re: original messages was: Carlos: via sound card software package

Flor Lynch
 

Perhaps it would, IF... and it’s a big if. Also, though the majority of contributors may not be on metered bandwidth connections, or paying per volume of data received, i.e., downloads; some may be. I suggest that we leave that sort of question to be decided upon by the moderators (if they wish to do so). Bear in mind, also, that not everybody has the same skill set, qand some may be slower to pick up on things than others (just the way we are all made).
 

From: Mike B.
Sent: Sunday, September 06, 2015 6:35 PM
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package
If everyone would set their email clients to include messages in their replies, this would keep late comers to any particular thread up to speed as well.
Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers!
----- Original Message -----
From: Flor Lynch
Sent: Sunday, September 06, 2015 7:56 AM
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package
 
Not everybody will do this. So it'd be better to ask people when posting
replies to make sure that they also send enough information in their replies
about the original message that they're responding to.

-----Original Message-----
From: rajmund
Sent: Sunday, September 06, 2015 3:49 PM
To: TechTalk@groups.io
Subject: original messages was: [TechTalk] Carlos: via sound card software
package

Hi all,
Please, this is a good example why we should try and keep the original
messages.

----- Original Message -----
>From: Carlos <carlos1106@...>
To: TechTalk@groups.io
Date: Saturday, 5 September 2015 9:31 pm
Subject: Re: [TechTalk] Carlos: via sound card software package

>
>
> Hi Bill,
> Your message does not seem to contain the reply I posted so I'm not even
> quite sure what I said.
> ----- Original Message -----
> From: "Bill Koppelmann" <billmeister@...>
> To: <TechTalk@groups.io>
> Sent: Saturday, September 05, 2015 12:36 PM
> Subject: [TechTalk] Carlos: via sound card software package
>
>
> > Hi Carlos,
> > Ok, if what you're saying is correct, then why can't I suddenly not get
> > any sound out of my headphone jack. I've not yet gotten to your message
> > about using usb headphones, but I'll be reading it soon. Perhaps that
> > might resolve my problem?
> > thanks,
> > Bill
> >
> >
> >
>
>
>
>

Sent from a Braille Sense






Re: Talking software for cell phones....

Lenron
 

it was windows based. I will not down anything that is not an Iphone
though. I loved my droid devices as well, I can use an Iphone quite
well but still wish not to use it as my everyday phone. Even though I
am currently.

On 9/6/15, Jessica D <jldail13@gmail.com> wrote:
Hi,
Yes, I do believe it was a Windows phone. I'm very happy I now own an
iPhone.. It's the best device I've ever owned.


Sent from my iPhone

On Sep 6, 2015, at 1:00 PM, Chris G <jedikent@mysticaccess.email> wrote:

Was your phone a windows phone or Symbian?

Talks worked well on Symbian based phones such as the n86, n82 etc, but
the windows port of the software was quite bad.
I think Verizon was the only carrier that distributed the Windows
version of Talks.

Chris

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:

http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


On Sun, 6 Sep 2015 11:40:59 -0400
"Jessica D" <jldail13@gmail.com> wrote:

Hi,
I do not recommend doing this. I used to own an HTC ozone that had this
software on it. Whenever I hung up from a call, I had to restart my phone
before I could do anything else. It crashed the entire system. The cost
of talx for this particular device was around $700.00.
I hope this helps.



Sent from my iPhone

On Sep 5, 2015, at 9:31 AM, Eddie <kansasroadrunner@att.net> wrote:

Okay, Thanks
Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:

http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223





--
Lenron Brown
Cell: 985-271-2832
Skype: ron.brown762


Re: The Listen Factor

Carlos
 

Hi Christina,
You can find Blindy.TV here.
Although it seems to be down at the moment.

----- Original Message -----
Sent: Sunday, September 06, 2015 9:52 AM
Subject: Re: [TechTalk] The Listen Factor

Carlos,

As a matter of fact I subscribed to it. I am also interested in more information about blindy. Please and thank you.

Christina

 

From: Carlos [mailto:carlos1106@...]
Sent: Sunday, September 06, 2015 8:14 AM
To: TechTalk@groups.io
Subject: [TechTalk] The Listen Factor

 

    Has anyone seen this website?

They have 7 channels of streaming audio for various television programs.  Similar to Blindy.TV I guess.  I found it posted at Blind Bargains while creating a classified for the list.




Re: original messages was: Carlos: via sound card software package

Christina Stolze
 

That is all well and good but I haven’t a clue on how to do that. I am not that good with the computer I am that novice who is afraid to break things and sometimes the intermediate computer user. If you can assist me in how to do that I would appreciate that for the most part I don’t really have too much to say because I would rather listen to learn but once in a while I might like to respond to ask for more information or something along those lines. Have a great day.

Christina

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Sunday, September 06, 2015 1:35 PM
To: TechTalk@groups.io
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

 

If everyone would set their email clients to include messages in their replies, this would keep late comers to any particular thread up to speed as well.

Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers!

----- Original Message -----

From: Flor Lynch

Sent: Sunday, September 06, 2015 7:56 AM

Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

 

Not everybody will do this. So it'd be better to ask people when posting
replies to make sure that they also send enough information in their replies
about the original message that they're responding to.

-----Original Message-----
From: rajmund
Sent: Sunday, September 06, 2015 3:49 PM
To: TechTalk@groups.io
Subject: original messages was: [TechTalk] Carlos: via sound card software
package

Hi all,
Please, this is a good example why we should try and keep the original
messages.

----- Original Message -----
>From: Carlos <carlos1106@...>
To: TechTalk@groups.io
Date: Saturday, 5 September 2015 9:31 pm
Subject: Re: [TechTalk] Carlos: via sound card software package

>
>
> Hi Bill,
> Your message does not seem to contain the reply I posted so I'm not even
> quite sure what I said.
> ----- Original Message -----
> From: "Bill Koppelmann" <billmeister@...>
> To: <TechTalk@groups.io>
> Sent: Saturday, September 05, 2015 12:36 PM
> Subject: [TechTalk] Carlos: via sound card software package
>
>
> > Hi Carlos,
> > Ok, if what you're saying is correct, then why can't I suddenly not get
> > any sound out of my headphone jack. I've not yet gotten to your message
> > about using usb headphones, but I'll be reading it soon. Perhaps that
> > might resolve my problem?
> > thanks,
> > Bill
> >
> >
> >
>
>
>
>

Sent from a Braille Sense







Re: Trouble With Program File Downloads In IE 11

emma goodwin <emma.sleeptalk@...>
 

I have also had download problems with Internet explorer. I don't know
If its necessarily related to IE 11 but I used to get regular errors
especially when downloading from servers. I think IE somehow breaks or
timesout the file but I have never figured out why. I'm glad Firefox
works though but sometimes I want to download something from Internet
explorer and it repeatedly errors or half downloads as you say. Can't
help but have had this before.

On 9/6/15, Flor Lynch <florlync@iol.ie> wrote:
I have sometimes had to activate the (Notification) Bar a second time, on
the same download. You may have to, or it may be asking/prompting yes/no to)
activate the Yes button?

From: Gerald Levy
Sent: Sunday, September 06, 2015 2:05 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Trouble With Program File Downloads In IE 11

Yes, when I activate the Information Bar with Alt-N, I get the buttons to
either open or save the file. But, as I said, when I activate the save
button, I hear the download completion ding sound immediately, indicating
that the entire file did not download successfully.

Gerald



From: Flor Lynch
Sent: Sunday, September 06, 2015 8:45 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Trouble With Program File Downloads In IE 11

You may be hearing the Information Bar? (You can activate with alt-n.)

From: Gerald Levy
Sent: Sunday, September 06, 2015 1:04 PM
To: TechTalk@groups.io
Subject: [TechTalk] Trouble With Program File Downloads In IE 11

I seem to be experienceing trouble downloading and saving some program
files, especially small ones, using IE 11 with Windows 7. If I choose to
save a program file that is fairly small, I hear the ding sound indicating
that the download is complete almost as soon as I select the file and
activate the save button. But when I go to the Downloads folder to open the
saved program file, I get an error message that the file cannot be opened
because it is a partial download. Checking the file properties shows that it
contains 0 bytes, which means that the file was never actually downloaded
and saved in the first place. Repeating the download process a few times
does not work, either; in every case ,I hear the ding sound as soon as I
activate the save button and the saved file always contains 0 bytes and thus
cannot be opened. If I use Firefox 40 to download and save the same program
file, the entire file is successfully downloaded and saved in my Downloads
folder and can be opened normally. This behavior does not seem to occur
when downloading and saving relatively large program files such as Auslogics
Disk Defrag. Has anyone else experienced this problem? Is there any way to
insure that IE 11 downloads and saves an entire program file, regardless of
its size? Thanks.

Gerald


--
Email: emma.sleeptalk@gmail.com
Twitter: @emmasleeptalk
Audioboo: www.audioboo.com/FoodGalore
Skype: emmagoodwin21


Re: converting PDF and retaining paragraph format

Flor Lynch
 

One might also want to delete right parentheses, apostrophes, and some other punctuation marks just  preceding hard returns, such as: )^zzz with )^n; ‘zzz with ‘^n; !zzz with !^n; ?zzz with ?^n, (in step 5 per the scheme below).
 

From: Flor Lynch
Sent: Sunday, September 06, 2015 5:51 PM
Subject: Re: [TechTalk] converting PDF and retaining paragraph format
Hi Dean,
 
This is what I did, and it seemed to work:
 
1. Converted the pdf to text.
 
2. Select All in the text ffile, copy to clipboard. 
 
3. Open a blank document in Microsoft Word. 
3A: Paste the clipboard contents into the Word document.
 
4. Now we’re going to do Finding and Replacing, and the Special Characters dialogue, More... button. Find: ^n . Replace with: zzz . REPLACE ALL Button, and ENTER.
 
5. Find: .zzz . Replace With: .n . Replace All.
 
5A:  (If necessary, Find and Replace All . zzz with . ^n ...
 
6. Now, Find and Replace ALL zzz with nothing, leaving the replacement field empty.
 
7. You may require more finding and replacing, use judiciously.
 
HTH, and Good Luck!
 
Sent: Sunday, September 06, 2015 3:55 PM
Subject: [TechTalk] converting PDF and retaining paragraph format

I like to convert PDF documents to other formats, usually text but could be any of several others.  When I use the conversion routine built into Adobe Reader, all the line breaks are converted into hard line breaks, making it hard to find the actual paragraph boundaries.  Does anybody have a solution to this?

 

Dean

 

 

 

http://bahaiteachings.org/

 

 


Re: Having problems Skanning my computer

Gene
 

Also, from the little I've played with the program, it offers to do things like update the data base, or I should say there is a way to do so shown, but it doesn't give information about when the update completes.  Also, it appears not to give information about how much of a scan is completed.  I expect a sighted person can see such information but no such information appears to be given for a screen-reader user.  You will, as I recall, see information indicating that a scan has finished.But I haven't seen any other information about the scan while it is in progress.
 
Gene
----- Original Message

From: Gene
Sent: Sunday, September 06, 2015 12:41 PM
Subject: Re: [TechTalk] Having problems Skanning my computer

Download Malware Bytes from
I'm giving you the link for the free version.
 
After you install and run the program, tab around and see what you find.  The interface isn't standard so you will see things like that you need to move from one radio button to another by right and left arrowing in some parts of the program.  You can move to different radio buttons and tab around to see the settings or actions you can take depending on the radio button you have moved to.  I'm not sure what you do at the end of the scan if malware is found.  I seldom have used the program and I haven't found enough malware to allow me to experiment enough to discuss that.  Others may have more comments or discussion.
 
Gene
----- Original Message -----
Sent: Sunday, September 06, 2015 9:57 AM
Subject: Re: [TechTalk] Having problems Skanning my computer

No, I don’t know how so, I hope that somebody tells me how to do it. Thanks.

Rosario

 

 

God grant me the serenity To accept the things I cannot change; the courage to change the things I can; and the wisdom to know the difference.

 

From: Gene [mailto:gsasner@...]
Sent: Sunday, September 06, 2015 12:13 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Having problems Skanning my computer

 

I'm not at all sure what is causing the problem.  It might be a good idea to scan the computer with the Esset online scanner and with Malware Bytes to see if those programs find any malware.  I'm not saying it is the case, but malware at times causes antimalware programs not to scan properly or at times not to scan at all.  It may not be malware at all but it's good to check.  List members can tell you how to use these programs if you don't know how.

 

Gene

----- Original Message -----

Sent: Saturday, September 05, 2015 11:28 PM

Subject: [TechTalk] Having problems Skanning my computer

 

Hi to all, I am having problems skanning my computer. I use Microsoft
Cecurity Essencials. When I put my computer in full skan, it goes till 25
percent and than it stops there. A message comes saying that the program is
not responding. I tried to uninstall  it but it just starts uninstalling
and than it stops and does nothing.
I have Windows7 and Jaws 14. I hope that you can help me because I don't
know what else to do. Thanks.
Rosario
 

God grant me the serenity To accept the things I cannot change; the courage
to change the things I can; and the wisdom to know the difference.





Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Joseph Lee <joseph.lee22590@...>
 

Hi,

Is this from my site (nvda-kr.irg) or from the add-on internals site? As of now, NV Access site is offline (it is hosted by a company in the united States, and there is no word on what’s going on).

Cheers,

Joseph

 

From: Marion Woods [mailto:marion_woods38@...]
Sent: Sunday, September 6, 2015 10:18 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

Hi Joseph ,

 

Sorry, but your link for the download NVDA install package only takes you to an unavailable  html link on the site.

 

Marion

 

From    : Marion Woods

Sent: Sunday, September 06, 2015 4:25 PM

Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

Hi Joseph ,

 

Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.

Could you check this out for me?

 

Regards,

 

Marion

 

From: Joseph Lee

Sent: Friday, September 04, 2015 5:09 AM

Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph


Re: Having problems Skanning my computer

Gene
 

Download Malware Bytes from
I'm giving you the link for the free version.
 
After you install and run the program, tab around and see what you find.  The interface isn't standard so you will see things like that you need to move from one radio button to another by right and left arrowing in some parts of the program.  You can move to different radio buttons and tab around to see the settings or actions you can take depending on the radio button you have moved to.  I'm not sure what you do at the end of the scan if malware is found.  I seldom have used the program and I haven't found enough malware to allow me to experiment enough to discuss that.  Others may have more comments or discussion.
 
Gene
----- Original Message -----

Sent: Sunday, September 06, 2015 9:57 AM
Subject: Re: [TechTalk] Having problems Skanning my computer

No, I don’t know how so, I hope that somebody tells me how to do it. Thanks.

Rosario

 

 

God grant me the serenity To accept the things I cannot change; the courage to change the things I can; and the wisdom to know the difference.

 

From: Gene [mailto:gsasner@...]
Sent: Sunday, September 06, 2015 12:13 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Having problems Skanning my computer

 

I'm not at all sure what is causing the problem.  It might be a good idea to scan the computer with the Esset online scanner and with Malware Bytes to see if those programs find any malware.  I'm not saying it is the case, but malware at times causes antimalware programs not to scan properly or at times not to scan at all.  It may not be malware at all but it's good to check.  List members can tell you how to use these programs if you don't know how.

 

Gene

----- Original Message -----

Sent: Saturday, September 05, 2015 11:28 PM

Subject: [TechTalk] Having problems Skanning my computer

 

Hi to all, I am having problems skanning my computer. I use Microsoft
Cecurity Essencials. When I put my computer in full skan, it goes till 25
percent and than it stops there. A message comes saying that the program is
not responding. I tried to uninstall  it but it just starts uninstalling
and than it stops and does nothing.
I have Windows7 and Jaws 14. I hope that you can help me because I don't
know what else to do. Thanks.
Rosario
 

God grant me the serenity To accept the things I cannot change; the courage
to change the things I can; and the wisdom to know the difference.





Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Joseph Lee <joseph.lee22590@...>
 

Hi,

I’ve been looking into this, and so far, no info from nV Access yet nor from the web host who hosts nV Access domain.

Cheers,

Joseph

 

From: Gene [mailto:gsasner@...]
Sent: Sunday, September 6, 2015 10:26 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

According to comments I've seen on the NVDA list, the NVDA sites are down.  They have been down for a day or two.  So you can continue to try to get the add on over time.  I would think the sites will probably be up again sometime in the next day or two or three.

 

Gene

----- Original Message -----

Sent: Sunday, September 06, 2015 10:25 AM

Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

Hi Joseph ,

 

Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.

Could you check this out for me?

 

Regards,

 

Marion

 

From: Joseph Lee

Sent: Friday, September 04, 2015 5:09 AM

Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph


Re: original messages was: Carlos: via sound card software package

Mike B. <mb69mach1@...>
 

If everyone would set their email clients to include messages in their replies, this would keep late comers to any particular thread up to speed as well.
Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers!

----- Original Message -----
From: Flor Lynch
Sent: Sunday, September 06, 2015 7:56 AM
Subject: Re: original messages was: [TechTalk] Carlos: via sound card software package

Not everybody will do this. So it'd be better to ask people when posting
replies to make sure that they also send enough information in their replies
about the original message that they're responding to.

-----Original Message-----
From: rajmund
Sent: Sunday, September 06, 2015 3:49 PM
To: TechTalk@groups.io
Subject: original messages was: [TechTalk] Carlos: via sound card software
package

Hi all,
Please, this is a good example why we should try and keep the original
messages.

----- Original Message -----
>From: Carlos <carlos1106@...>
To: TechTalk@groups.io
Date: Saturday, 5 September 2015 9:31 pm
Subject: Re: [TechTalk] Carlos: via sound card software package

>
>
> Hi Bill,
> Your message does not seem to contain the reply I posted so I'm not even
> quite sure what I said.
> ----- Original Message -----
> From: "Bill Koppelmann" <billmeister@...>
> To: <TechTalk@groups.io>
> Sent: Saturday, September 05, 2015 12:36 PM
> Subject: [TechTalk] Carlos: via sound card software package
>
>
> > Hi Carlos,
> > Ok, if what you're saying is correct, then why can't I suddenly not get
> > any sound out of my headphone jack. I've not yet gotten to your message
> > about using usb headphones, but I'll be reading it soon. Perhaps that
> > might resolve my problem?
> > thanks,
> > Bill
> >
> >
> >
>
>
>
>

Sent from a Braille Sense






Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Marion Woods <marion_woods38@...>
 

Thanks Gene,I  will try again another day.
 
Marion
 

From: Gene
Sent: Sunday, September 06, 2015 6:26 PM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 
According to comments I've seen on the NVDA list, the NVDA sites are down.  They have been down for a day or two.  So you can continue to try to get the add on over time.  I would think the sites will probably be up again sometime in the next day or two or three.
 
Gene
----- Original Message -----
Sent: Sunday, September 06, 2015 10:25 AM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 
Hi Joseph ,
 
Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.
Could you check this out for me?
 
Regards,
 
Marion
 
From: Joseph Lee
Sent: Friday, September 04, 2015 5:09 AM
Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph


Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Marion Woods <marion_woods38@...>
 

 
So am I  Gerald, but it’s a  pleasant voice, and it makes a  change from JFW.
 
 
Marion
 

Sent: Sunday, September 06, 2015 5:48 PM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 
 
Just out of curiosity, which voice are you using for NVDA? I’m using the Microsoft Speech Platform Ziro Pro voice, which is better than those horrible default ESpeak voices or Microsoft Anna, but still nowhere near as clear or responsive as Eloquence.
 
Gerald
 
 
 
 
Sent: Sunday, September 06, 2015 11:25 AM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 
Hi Joseph ,
 
Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.
Could you check this out for me?
 
Regards,
 
Marion
 
From: Joseph Lee
Sent: Friday, September 04, 2015 5:09 AM
Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph


Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Gene
 

According to comments I've seen on the NVDA list, the NVDA sites are down.  They have been down for a day or two.  So you can continue to try to get the add on over time.  I would think the sites will probably be up again sometime in the next day or two or three.
 
Gene

----- Original Message -----
Sent: Sunday, September 06, 2015 10:25 AM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA

Hi Joseph ,
 
Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.
Could you check this out for me?
 
Regards,
 
Marion
 
From: Joseph Lee
Sent: Friday, September 04, 2015 5:09 AM
Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph


Re: NVDA Add-on Internals: System Tray List add-on for NVDA #article

Marion Woods <marion_woods38@...>
 

Hi Joseph ,
 
Sorry, but your link for the download NVDA install package only takes you to an unavailable  html link on the site.
 
Marion
 
From    : Marion Woods
Sent: Sunday, September 06, 2015 4:25 PM
Subject: Re: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 
Hi Joseph ,
 
Thanks for introducing me to NVDA as an alternative to Jaws, I  have installed it on my PC With a  great voice, plus a  couple of add ins and I  am beginning to like  it more and more. However, The link you posted to the system tray addin does  not appear to work at the moment.
Could you check this out for me?
 
Regards,
 
Marion
 

From: Joseph Lee
Sent: Friday, September 04, 2015 5:09 AM
Subject: [TechTalk] NVDA Add-on Internals: System Tray List add-on for NVDA
 

Hi all,

For those transitioning from JAWS to NVDA may have found that NVDA does not come with a command to display system tray icons in a list view. Thankfully, you can have this back with an add-on, and in this article, I’ll give you a behind the scenes tour of how this add-on works.

First, the add-on download link:

http://addons.nvda-project.org/addons/systrayList.en.html

The link to my blog where the article can be read:

http://joslee22590.blogspot.com/2015/09/nvda-add-on-internals-systray-list.html

Hope this helps (let me know if you’d like me to simplify my article further, as it is somewhat technical for some).

Cheers,

Joseph

98981 - 99000 of 100717