Date   

Re: The Listen Factor

Christina Stolze
 

Carlos,

As a matter of fact I subscribed to it. I am also interested in more information about blindy. Please and thank you.

Christina

 

From: Carlos [mailto:carlos1106@...]
Sent: Sunday, September 06, 2015 8:14 AM
To: TechTalk@groups.io
Subject: [TechTalk] The Listen Factor

 

    Has anyone seen this website?

They have 7 channels of streaming audio for various television programs.  Similar to Blindy.TV I guess.  I found it posted at Blind Bargains while creating a classified for the list.




Re: Talking software for cell phones....

Eddie <kansasroadrunner@...>
 

Okay, Thanks


Re: Trouble With Program File Downloads In IE 11

Gerald Levy
 

 
The problem does not seem to be limited to one specific web site.  It seems to be affected more by file size than the location from where the file is being downloaded.  It is as if IE 11 isn’t getting a chance to recognize the file to download and save it because it is so small.  I notice that most of these program files are for for programs that do not install on the computer, but rather are portable versions whose .exe file is saved in the Downloads folder, perhaps along with some other related files. An example is Weather Mate, a program that displays the current local temperture in the System Tray.  This is apparently a portable program with a total file size of about 350kb.  But each time I tried to download and save it with IE 11, I only got a partial download.  But when I used Firefox 40 to download and save this program in the Downloads folder, the entire file was saved successfully, and the Weather Mate current temperature icon was placed in the System Tray, which is exactly what I wanted. Checking the Downloads folder revealed that the entire Weather Mate .exe file had been saved along with a few other related Weather Mate files.   
 
Gerald
 
 
 

From: Carlos
Sent: Sunday, September 06, 2015 8:07 AM
Subject: Re: [TechTalk] Trouble With Program File Downloads In IE 11
 
Does the problem occur with smaller programs on one particular website or does it occur on all websites?
----- Original Message -----
Sent: Sunday, September 06, 2015 8:04 AM
Subject: [TechTalk] Trouble With Program File Downloads In IE 11
 
 
I seem to be experienceing trouble downloading and saving  some program files, especially small ones, using IE 11 with Windows 7.  If I choose to save a program file that is fairly small, I hear the ding sound indicating that the download is complete almost as soon as I select the file and activate the save button.  But when I go to the Downloads folder to open the saved program file, I get an error message that the file cannot be opened because it is a partial download. Checking the file properties shows that it contains 0 bytes, which means that the file was never actually downloaded and saved in the first place.  Repeating the download process a few times does not work, either; in every case ,I hear the ding sound as soon as I activate the save button and the saved file always contains 0 bytes and thus cannot be opened.  If I use Firefox 40 to download and save the same program file, the entire file is successfully downloaded and saved in my Downloads folder and can be opened normally.  This behavior does not seem to occur when downloading and saving relatively large program files such as Auslogics Disk Defrag.  Has anyone else experienced this problem?  Is there any way to insure that IE 11 downloads and saves an entire program file, regardless of its size?  Thanks.
 
Gerald
 
 


Re: JAWS for DOS

Monte Single
 

What would one use jaws for dos

These days?
Thanks,
Monte

-----Original Message-----
From: Chris G [mailto:jedikent@mysticaccess.email]
Sent: September-06-15 6:39 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] JAWS for DOS

Hi,
This link should get you the download:

http://www.allinaccess.com/happ/files/jaws/

Chris

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


On Sat, 5 Sep 2015 13:54:31 -0400
"Bob J" <rjustice004@woh.rr.com> wrote:

Hello Group,

Does anybody out there have a copy of the public domain version of JAWS
for DOS that you would be willing to share?

T I A

Bob AD8RJ

"It ain't ignorance that causes all the trouble in this world. It's
the things people know that ain't so." --Edwin Howard Armstrong

---
This email is free from viruses and malware because avast! Antivirus
protection is active.
https://www.avast.com/antivirus


Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


Re: Talking software for cell phones....

Carlos
 

Hi Eddie,
You'll have to wait for someone with more information on that subject to answer your question.

----- Original Message -----
From: Eddie
Sent: Saturday, September 05, 2015 8:48 AM
Subject: [TechTalk] Talking software for cell phones....

Carlos,
I was wandering if you could tell me what the Nuance Talks screenreader is, and how I find out how good it works, and the price?
Also, what all phones it might work with.
Thanks,      Eddie


Re: Trouble With Program File Downloads In IE 11

Gerald Levy
 

 
Yes, when I activate the Information Bar with Alt-N, I get the buttons to either open or save the file.  But, as I said, when I activate the save button, I hear the download completion ding sound immediately, indicating that the entire file did not download successfully.
 
Gerald
 
 
 

From: Flor Lynch
Sent: Sunday, September 06, 2015 8:45 AM
Subject: Re: [TechTalk] Trouble With Program File Downloads In IE 11
 
You may be hearing the Information Bar? (You can activate with alt-n.) 
 
Sent: Sunday, September 06, 2015 1:04 PM
Subject: [TechTalk] Trouble With Program File Downloads In IE 11
 
I seem to be experienceing trouble downloading and saving  some program files, especially small ones, using IE 11 with Windows 7.  If I choose to save a program file that is fairly small, I hear the ding sound indicating that the download is complete almost as soon as I select the file and activate the save button.  But when I go to the Downloads folder to open the saved program file, I get an error message that the file cannot be opened because it is a partial download. Checking the file properties shows that it contains 0 bytes, which means that the file was never actually downloaded and saved in the first place.  Repeating the download process a few times does not work, either; in every case ,I hear the ding sound as soon as I activate the save button and the saved file always contains 0 bytes and thus cannot be opened.  If I use Firefox 40 to download and save the same program file, the entire file is successfully downloaded and saved in my Downloads folder and can be opened normally.  This behavior does not seem to occur when downloading and saving relatively large program files such as Auslogics Disk Defrag.  Has anyone else experienced this problem?  Is there any way to insure that IE 11 downloads and saves an entire program file, regardless of its size?  Thanks.
 
Gerald
 
 


Talking software for cell phones....

Eddie <kansasroadrunner@...>
 

Carlos,
I was wandering if you could tell me what the Nuance Talks screenreader is, and how I find out how good it works, and the price?
Also, what all phones it might work with.
Thanks,      Eddie


Re: Question about the Windows m keystroke

Flor Lynch
 

You have confirmed my thought, Dean. (Thanks.)
 

Sent: Sunday, September 06, 2015 12:36 PM
Subject: Re: [TechTalk] Question about the Windows m keystroke

I can’t yet speak for later versions of Windows, but in Windows 7, windows+m minimizes all apps and puts focus on the desktop.  Windows+d toggles between focus on the current program and on the desktop.  If you hit Windows+d a second time after focusing on the desktop, focus returns to the previous program.

 

Dean

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Sunday, September 06, 2015 7:13 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Question about the Windows m keystroke

 

 

I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?

 

Gerald

 

 

 

From: Gene

Sent: Saturday, September 05, 2015 8:02 PM

Subject: Re: [TechTalk] Question about the Windows m keystroke

 

This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.

 

Gene

 

Sent: Saturday, September 05, 2015 6:33 PM

Subject: [TechTalk] Question about the Windows m keystroke

 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Trouble With Program File Downloads In IE 11

Flor Lynch
 

You may be hearing the Information Bar? (You can activate with alt-n.) 
 

Sent: Sunday, September 06, 2015 1:04 PM
Subject: [TechTalk] Trouble With Program File Downloads In IE 11
 
I seem to be experienceing trouble downloading and saving  some program files, especially small ones, using IE 11 with Windows 7.  If I choose to save a program file that is fairly small, I hear the ding sound indicating that the download is complete almost as soon as I select the file and activate the save button.  But when I go to the Downloads folder to open the saved program file, I get an error message that the file cannot be opened because it is a partial download. Checking the file properties shows that it contains 0 bytes, which means that the file was never actually downloaded and saved in the first place.  Repeating the download process a few times does not work, either; in every case ,I hear the ding sound as soon as I activate the save button and the saved file always contains 0 bytes and thus cannot be opened.  If I use Firefox 40 to download and save the same program file, the entire file is successfully downloaded and saved in my Downloads folder and can be opened normally.  This behavior does not seem to occur when downloading and saving relatively large program files such as Auslogics Disk Defrag.  Has anyone else experienced this problem?  Is there any way to insure that IE 11 downloads and saves an entire program file, regardless of its size?  Thanks.
 
Gerald
 
 


Re: JAWS for DOS

Chris G <jedikent@...>
 

Hi,
This link should get you the download:

http://www.allinaccess.com/happ/files/jaws/

Chris

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


On Sat, 5 Sep 2015 13:54:31 -0400
"Bob J" <rjustice004@woh.rr.com> wrote:

Hello Group,

Does anybody out there have a copy of the public domain version of JAWS for DOS that you would be willing to share?

T I A

Bob AD8RJ

"It ain't ignorance that causes all the trouble in this world. It's the things people know that ain't so." --Edwin Howard Armstrong

---
This email is free from viruses and malware because avast! Antivirus protection is active.
https://www.avast.com/antivirus


Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


The Listen Factor

Carlos
 

    Has anyone seen this website?
They have 7 channels of streaming audio for various television programs.  Similar to Blindy.TV I guess.  I found it posted at Blind Bargains while creating a classified for the list.


Re: Trouble With Program File Downloads In IE 11

Carlos
 

Does the problem occur with smaller programs on one particular website or does it occur on all websites?

----- Original Message -----
Sent: Sunday, September 06, 2015 8:04 AM
Subject: [TechTalk] Trouble With Program File Downloads In IE 11

 
I seem to be experienceing trouble downloading and saving  some program files, especially small ones, using IE 11 with Windows 7.  If I choose to save a program file that is fairly small, I hear the ding sound indicating that the download is complete almost as soon as I select the file and activate the save button.  But when I go to the Downloads folder to open the saved program file, I get an error message that the file cannot be opened because it is a partial download. Checking the file properties shows that it contains 0 bytes, which means that the file was never actually downloaded and saved in the first place.  Repeating the download process a few times does not work, either; in every case ,I hear the ding sound as soon as I activate the save button and the saved file always contains 0 bytes and thus cannot be opened.  If I use Firefox 40 to download and save the same program file, the entire file is successfully downloaded and saved in my Downloads folder and can be opened normally.  This behavior does not seem to occur when downloading and saving relatively large program files such as Auslogics Disk Defrag.  Has anyone else experienced this problem?  Is there any way to insure that IE 11 downloads and saves an entire program file, regardless of its size?  Thanks.
 
Gerald
 
 


Trouble With Program File Downloads In IE 11

Gerald Levy
 

 
I seem to be experienceing trouble downloading and saving  some program files, especially small ones, using IE 11 with Windows 7.  If I choose to save a program file that is fairly small, I hear the ding sound indicating that the download is complete almost as soon as I select the file and activate the save button.  But when I go to the Downloads folder to open the saved program file, I get an error message that the file cannot be opened because it is a partial download. Checking the file properties shows that it contains 0 bytes, which means that the file was never actually downloaded and saved in the first place.  Repeating the download process a few times does not work, either; in every case ,I hear the ding sound as soon as I activate the save button and the saved file always contains 0 bytes and thus cannot be opened.  If I use Firefox 40 to download and save the same program file, the entire file is successfully downloaded and saved in my Downloads folder and can be opened normally.  This behavior does not seem to occur when downloading and saving relatively large program files such as Auslogics Disk Defrag.  Has anyone else experienced this problem?  Is there any way to insure that IE 11 downloads and saves an entire program file, regardless of its size?  Thanks.
 
Gerald
 
 


Re: Question about the Windows m keystroke

Carlos
 

I stand corrected.  Indeed, Windows M minimizes all applications.  It's been a long time since I actually looked at the shortcut descriptions.

----- Original Message -----
Sent: Sunday, September 06, 2015 7:36 AM
Subject: Re: [TechTalk] Question about the Windows m keystroke

I can’t yet speak for later versions of Windows, but in Windows 7, windows+m minimizes all apps and puts focus on the desktop.  Windows+d toggles between focus on the current program and on the desktop.  If you hit Windows+d a second time after focusing on the desktop, focus returns to the previous program.

 

Dean

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Sunday, September 06, 2015 7:13 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Question about the Windows m keystroke

 

 

I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?

 

Gerald

 

 

 

From: Gene

Sent: Saturday, September 05, 2015 8:02 PM

Subject: Re: [TechTalk] Question about the Windows m keystroke

 

This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.

 

Gene

 

Sent: Saturday, September 05, 2015 6:33 PM

Subject: [TechTalk] Question about the Windows m keystroke

 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Question about the Windows m keystroke

Dean Martineau <topdot@...>
 

I can’t yet speak for later versions of Windows, but in Windows 7, windows+m minimizes all apps and puts focus on the desktop.  Windows+d toggles between focus on the current program and on the desktop.  If you hit Windows+d a second time after focusing on the desktop, focus returns to the previous program.

 

Dean

 

 

 

From: Gerald Levy [mailto:bwaylimited@...]
Sent: Sunday, September 06, 2015 7:13 AM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Question about the Windows m keystroke

 

 

I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?

 

Gerald

 

 

 

From: Gene

Sent: Saturday, September 05, 2015 8:02 PM

Subject: Re: [TechTalk] Question about the Windows m keystroke

 

This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.

 

Gene

 

Sent: Saturday, September 05, 2015 6:33 PM

Subject: [TechTalk] Question about the Windows m keystroke

 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Question about the Windows m keystroke

Flor Lynch
 

Interesting, because, originally, back in the day, WindowsM was supposed to ‘minimize all apps’.
 

From: Carlos
Sent: Sunday, September 06, 2015 12:19 PM
Subject: Re: [TechTalk] Question about the Windows m keystroke
Windows M only minimizes the active window before moving focus to the Desktop.  Windows D minimizes all windows before moving focus to the Desktop.  I find it interesting that so many users have had problems with Windows M.  It has always worked for me.
----- Original Message -----
Sent: Sunday, September 06, 2015 7:13 AM
Subject: Re: [TechTalk] Question about the Windows m keystroke
 
 
I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?
 
Gerald
 
 
 
From: Gene
Sent: Saturday, September 05, 2015 8:02 PM
Subject: Re: [TechTalk] Question about the Windows m keystroke
 
This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.
 
Gene
 
Sent: Saturday, September 05, 2015 6:33 PM
Subject: [TechTalk] Question about the Windows m keystroke
 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Question about the Windows m keystroke

Carlos
 

Windows M only minimizes the active window before moving focus to the Desktop.  Windows D minimizes all windows before moving focus to the Desktop.  I find it interesting that so many users have had problems with Windows M.  It has always worked for me.

----- Original Message -----
Sent: Sunday, September 06, 2015 7:13 AM
Subject: Re: [TechTalk] Question about the Windows m keystroke

 
I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?
 
Gerald
 
 
 
From: Gene
Sent: Saturday, September 05, 2015 8:02 PM
Subject: Re: [TechTalk] Question about the Windows m keystroke
 
This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.
 
Gene
 
Sent: Saturday, September 05, 2015 6:33 PM
Subject: [TechTalk] Question about the Windows m keystroke
 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Question about the Windows m keystroke

Gerald Levy
 

 
I have noticed this behavior as well.  Windows key-M does not always move focus to the desktop in Windows 7 on the first try as it did in XP.  I sometimes have to execute it twice to focus on the desktop.  But Windows key-D always seems to move focus to the desktop right away.  So what is the real difference between these two keystroke commands, anyway?
 
Gerald
 
 
 

From: Gene
Sent: Saturday, September 05, 2015 8:02 PM
Subject: Re: [TechTalk] Question about the Windows m keystroke
 
This is a known problem.  I have to issue the command Windows key m twice almost every time I want to return to the desktop.  If you want to avoid the problem, just issue the command twice quickly instead of once.  I have the problem in Windows 7 and I've seen others discuss it as well.  I wouldn't be surprised if many users in Windows 7 and higher have this problem.
 
Gene
 
Sent: Saturday, September 05, 2015 6:33 PM
Subject: [TechTalk] Question about the Windows m keystroke
 

Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.

 

I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn’t changed anything. *sigh*

 

Any suggestions?

 

TerriLynne


Re: Question about the Windows m keystroke

Chris G <jedikent@...>
 

Hi,
Windows-d works better to focus the desktop as you just do it once and
you are there.
Windows-m has been a problem for a while in later versions of Windows.
As I type this I'm using the fast ring for insiders on Windows 10 and I
just tried Windows-m 3 times I was moved to the desktop on the first
press.

Chris

Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


On Sat, 5 Sep 2015 19:02:30 -0500
"Gene" <gsasner@ripco.com> wrote:

This is a known problem. I have to issue the command Windows key m twice almost every time I want to return to the desktop. If you want to avoid the problem, just issue the command twice quickly instead of once. I have the problem in Windows 7 and I've seen others discuss it as well. I wouldn't be surprised if many users in Windows 7 and higher have this problem.

Gene


From: TerriLynne Pomeroy
Sent: Saturday, September 05, 2015 6:33 PM
To: TechTalk@groups.io
Subject: [TechTalk] Question about the Windows m keystroke


Hi all,

I do a lot of alt tabbing between windows, so I like to have my desktop only show up when I hit Windows plus m. However, in the last couple of days, the first time I hit windows key plus m, it is taking me to a place where it just says start. I have to do it a second time to get to the desktop.



I thought this might be a keyboard issue, so I went and bought a new keyboard, but it hasn't changed anything. *sigh*



Any suggestions?



TerriLynne
Chris Grabowski
Mystic Access
Where the magic is in learning.
http://www.MysticAccess.com

Check out our eclectic and comprehensive assistive technology podcasts at:
http://www.MysticAccessPodcast.com

Contact:

Phone: (716) 543-3323
Direct Line: (716) 670-1221
Facebook: mysticaccessempower
Twitter: MysticAccess
733 Delaware Rd 341
Buffalo, NY 14223


Re: Charter e-mail accounts

Kimsan <kimsansong@...>
 

I was told that several months ago.

 

I mean it’s irrelevant at this point for me, as I can’t or don’t even know my charter email. Simple call, but the password and not knowing is an issue. Charter didn’t bother to help me and simply stated to go onto the site to reset my password.

Now, this was my experience which is why I said the hell with it and went with gmail.

 

Kimsan Song

kimsansong@...

 

From: Mike B. [mailto:mb69mach1@...]
Sent: Friday, September 4, 2015 1:40 PM
To: TechTalk@groups.io
Subject: Re: [TechTalk] Charter e-mail accounts

 

Hi Gene & All,

 

In talking to a Charter representative a couple of weeks ago, I was told that sometime in the real near future Charter is going to stop their support of POP3, & from what this representative said, it will be without warning!  Others may get different answers from various Charter representatives, but I can only relay what I was told.

Take care.
Mike
This email was sent from my, iBarstool.  Go Dodgers!

----- Original Message -----

From: Gene

Sent: Friday, September 04, 2015 1:08 PM

Subject: [TechTalk] Charter e-mail accounts

 

    I didn't save messages from the previous thread but I wanted to respond after doing a little looking around.  This page:

discusses different e-mail settings.  I didn't read the entire page but I read quite a bit of it.  It appears very likely that Charter does, in fact, provide Pop3 accounts if that is what you want to use.  The page gives settings for different kinds of accounts.

 

Gene

99021 - 99040 of 100717