|
Re: Eloquence for NVDA
Lenron
It's the same price. I would rather support atguys but that's just me.
toggle quoted messageShow quoted text
As far as I know they both sell for 69 bucks.
On 2/11/20, Damien Garwood <damien@daygar.plus.com> wrote:
Hi, --
Lenron Brown Cell: 985-271-2832 Skype: ron.brown762
|
|
|
|
Re: Eloquence for NVDA
Damien Garwood <damien@...>
Hi,
toggle quoted messageShow quoted text
All ATGuys do is sell the CodeFactory version, likely at a profit, so better to buy it direct from CF in my opinion. Cheers, Damien.
On 11/02/2020 11:48 am, Josh Kennedy wrote:
You can also buy all eloquence synthesizers from www.atguys.com <http://www.atguys.com> and they sell vocalizer as well.
|
|
|
|
Re: Low-Cost Braille Displays
Josh Kennedy
I own both the orbit reader and the braille me. On the orbit reader the dots show up propperly all the time. It uses modified cell phone vibration micro-motors to move the dots up and down. Editing on the orbit reader is excellent. It is quiet enough to use in a meeting or church service. The braille on both the orbit reader and the braille me that I own feels like elevator door braille, ATM machine signage braille, hotel room door braille, or bathroom signage braille. It is signage-quality braille on both low-cost displays. The braille me is $531 from www.atguys.com or national braille press. The orbit reader costs more at $600 and also add $10 shipping for both displays. The braille me is also good, and quiet. The orbit reader sounds like somebody shuffling cards quietly when it refreshes. The braille me refreshes its dots all at once with its electromagnetic display technology and it sounds like somebody walking on gravel or small rocks very quietly and quickly. The display being behind the keyboard furthest from you on the braille me does not give me any issues. I like reading with both of them. Sometimes a dot won't pop up. A light shake or tap fixes this or holding the display at a slight angle. I think this can be fixed with firmware update that will send repeated 3 or 4 electric pulses to the electropermanent magnets of all 120 dots making sure 3 or 4 times that dots that need raised are raised and dots that need lowered are lowered. But the very occasional dot not popping up on the braille me is so very occasional it does not bother me at all. The braille me has a clock and calendar you set using the cursor router button and left navigation keys. And I like that it has on-board braille translation but the orbit does not have on-board braille translation. Also the braille me supports more languages out of the box. I love both displays and recommend both of them!!
Josh
|
|
|
|
Re: Eloquence for NVDA
Josh Kennedy
You can also buy all eloquence synthesizers from www.atguys.com and they sell vocalizer as well.
|
|
|
|
Winamp Playlist problem
Samuel Wilkins
Hello all, I am having a problem with the Winamp Playlist. When I have a playlist of files in Winamp, I would like to view the files to see how long they are. However, the playlist editor only displays the first file, and going up and down with the arrow keys doesn't show the other files. Could it be something I pressed to make it do this? Thank you in advance.
|
|
|
|
Re: Subscribing to Blind Programmers list
Kerryn Gunness
toggle quoted messageShow quoted text
true
|
|
|
|
Re: Subscribing to Blind Programmers list
Mike B
toggle quoted messageShow quoted text
Hi Kerryn,
It might just be that the list owners / moderators
are just flat out slow about getting around to giving the okay to new
subscribers. I'm experiencing the same thing trying to subscribe to a
different list. I sent the subscribe email 2 days ago & I'm still
waiting for the okie dokie.
Take care. Mike. Sent from my iBarstool.
----- Original Message -----
Sent: Monday, February 10, 2020 10:36 AM
Subject: Re: [TechTalk] Subscribing to Blind Programmers
list ----- Original Message ----- From: "Dave" <dlh007@...> To: <main@techtalk.groups.io> Sent: Monday, February 10, 2020 12:04 PM Subject: [TechTalk] Subscribing to Blind Programmers list > Hello, > > > I've been reading these posts about subscribing to the Blind Programmers > list, and I too attempted to use the address given, and received an Error. > > > Then I recalled that some List some where, I subscribed to, used a + > instead of a - in the address field. > > > Example: program-l+subscribe@... > > > I sent another Email, this time with the + and I have yet to get an Error > message, but I have yet to get any sort of Message back from this list. > > > Don't know if a Real Person has to review the request before it goes > through, or if my email using the + is Circling the Globe right now, and > will continue to do so for the next day or two, when then I'll get an > Error telling me this address was undeliverable etc. > > > Grumpy Dave > > > > > >
|
|
|
|
How do I find my "all mail" folder using outlook2016
James Bentley
Hi all,
I’m using a Gmail account and an A T and T account with Outlook2016.
I would like to know how to get to the All Mail folder” It doesn’t show up when I arrow down through folders in Gmail or A T and T.
Thanks,
James Bentley
|
|
|
|
Re: Scrip Talk mobile app.
Barb O'Connor
I just wanted to report that I did check for updates today and the ScripTalk mobile app is back in the App Store and is ready to update.
toggle quoted messageShow quoted text
Barb
On Feb 7, 2020, at 1:18 PM, Barbara O'Connor <broconnor1972@comcast.net> wrote:
|
|
|
|
Low-Cost Braille Displays
Jujube
Hey everyone, What do you think of low-cost braille displays like the Braille Me and the Orbit Reader? Any other new and inexpensive braille displays worth mentioning?
1. Do the dots show up properly? Are they noisy? 2. How easy is it to edit documents? Like how well do the cursor buttons work? 3. Any other thoughts?
|
|
|
|
Re: Subscribing to Blind Programmers list
Kerryn Gunness
i tried it
toggle quoted messageShow quoted text
----- Original Message -----
From: "Dave" <dlh007@centurylink.net> To: <main@techtalk.groups.io> Sent: Monday, February 10, 2020 12:04 PM Subject: [TechTalk] Subscribing to Blind Programmers list Hello,
|
|
|
|
Re: blind programmers group
Kerryn Gunness
did not work, means
no response to the emails
|
|
|
|
Re: blind programmers group
Gene
And just as I thought, following a link to a group
brings up a page that has a form for joining the list.
Gene
----- Original Message -----
See this page for the results of a search of
Freelists for blind programmers. I don't recall just what you are looking
for in terms of the focus of the list, but you should find what you want there
and by following the link to the list you want, you should find subscription
information.
Gene
----- Original Message -----
Sent: Monday, February 10, 2020 9:18 AM
Subject: Re: [TechTalk] blind programmers group this email did not work
|
|
|
|
Re: blind programmers group
Gene
See this page for the results of a search of
Freelists for blind programmers. I don't recall just what you are looking
for in terms of the focus of the list, but you should find what you want there
and by following the link to the list you want, you should find subscription
information.
Gene
----- Original Message -----
Sent: Monday, February 10, 2020 9:18 AM
Subject: Re: [TechTalk] blind programmers group this email did not work
|
|
|
|
Subscribing to Blind Programmers list
Dave
Hello,
I've been reading these posts about subscribing to the Blind Programmers list, and I too attempted to use the address given, and received an Error. Then I recalled that some List some where, I subscribed to, used a + instead of a - in the address field. Example: program-l+subscribe@freelists.org I sent another Email, this time with the + and I have yet to get an Error message, but I have yet to get any sort of Message back from this list. Don't know if a Real Person has to review the request before it goes through, or if my email using the + is Circling the Globe right now, and will continue to do so for the next day or two, when then I'll get an Error telling me this address was undeliverable etc. Grumpy Dave
|
|
|
|
Re: blind programmers group
Gene
What does did not work mean? Was there any
response to the message or nothing?
Gene
----- Original Message -----
Sent: Monday, February 10, 2020 9:18 AM
Subject: Re: [TechTalk] blind programmers group this email did not work
|
|
|
|
Re: Eloquence for NVDA
Gene
When you follow the link to the page describing the
add on, there is a line of text after the description that says get the
app. Below that are two links, one for the version compatible with
the new version of NVDA and another for the version compatible with previous
NVDA versions. Sometimes, if something isn't as you expect, such as a
download link, you have to read either all the page or a good deal of it.
I started reading the description because I thought I would find something
during or after it for downloading.
Also, there is a SAPI version of Eloquence which, I
believe is sold by Code Factory as well. The advantage of it is that it is
completely independent of any future changes in NVDA so you will never have
compatibility problems in future. Also, it will run with any program that
supports SAPI 5. If you only want Eloquence and not the other synthesizer
bundled with the add-on, I would suggest downloading demos of each and seeing if
you like one better for some reason, unless you already purchased the Eloquence
add-on in the past. In that case, there mus be a way to update the license
for the new version.
Gene
----- Original Message -----
From: Damien Garwood
Sent: Monday, February 10, 2020 9:02 AM
Subject: Re: [TechTalk] Eloquence for NVDA Not sure where you can purchase it from the main site, but you can download it. I'm sure if you install it, there'll be a button that will take you to the order page. Cheers, Damien. On 10/02/2020 02:43 pm, Mike B wrote: > Hi Damien, > Thank you very much. I didn't see anywhere on the website to buy / pay > for the Add-in. Is there a different page to go to to buy it? And, How > much is it? Thanks again. > > Take care. Mike. Sent from my iBarstool. > ----- Original Message ----- > *From:* Damien Garwood <mailto:damien@...> > *To:* main@TechTalk.groups.io <mailto:main@TechTalk.groups.io> > *Sent:* Monday, February 10, 2020 6:03 AM > *Subject:* Re: [TechTalk] Eloquence for NVDA > > Hi Mike, > You can find it at: > https://codefactoryglobal.com/app-store/voices-for-nvda/ > Cheers, > Damien. > > On 10/02/2020 01:59 pm, Mike B wrote: > > Hi All, > > How & where do I get Eloquence for this latest NVDA 2019.3? Thanks much. > > > > Take care. Mike. Sent from my iBarstool. > > > > >
|
|
|
|
Re: Eloquence for NVDA
Lisa Belville
Hi, Damien.
toggle quoted messageShow quoted text
How does the add-on get updated if someone already has it installed but is using it with an older version of NVDA?� I purchased my Eloquence through AT Guys, and I also got the Vocalizer voices package at the same time.� How does all of this work once the NVDA update is installed? Lisa Belville missktlab1217@frontier.com
On 2/10/2020 9:02 AM, Damien Garwood wrote:
Hi Mike,
|
|
|
|
Re: Eloquence for NVDA
Lisa Belville
Hi, Mike,
I have the older Add-On which works with the current version of NVDA.� I haven't installed the 2019 update yet, but if I remember correctly, codefactory gives you a one week trial of the add-on that starts by default once you've installed it.
Once that trial ends, you can purchase it from codefactory.
Lisa Belville missktlab1217@... On 2/10/2020 8:43 AM, Mike B wrote:
|
|
|
|
Re: blind programmers group
Kerryn Gunness
this email did not work
|
|
|
