Dear Friends, Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data Folder,


Alan
 

Dear Friends,

The question was,

if I have a 32 Bit or 64 bit Windows 7 machine?

Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data folder, but No Program Files (x86) folder, so from reading the messages of instructions you generously provided me, I must assume I have a 32 Bit machine!

Thanks for all your help!


With best regards.
God Bless.
Alan
Plantation, Sunny South Florida

----- Original Message -----
From: "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 8:22 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!


1. press window r for run dialogue box
2. type here, msinfo32 and press enter
3. then tab to the reading, use down arrow, yo uwill get the info you requested

note, in point 2, please type msinfo32 with no spaces


----- Original Message -----
From: "Smiling?" <blind7@sbcglobal.net>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 4:41 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!


There's only one thing that I see that is incorrect below, and that is if you are using a 32bit machine, there will be a Program Files (x86) folder which is not true. If you are using a 32bit machine, it will only have a Program Files directory and not the Program Files (x86) directory.

It's when one is using a 64bit machine, it will have both of these above directories.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Dave
Sent: Saturday, October 12, 2019 2:23 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!

I am sure there are more than one way to tell if your System is a 64 bit
or 32 bit, but here's how I find out.


I look on the C: Drive, at the folders. If you have One folder that is
named PROGRAM FILES, and another called, PROGRAM FILES X86, then you
have a 64 bit System.


If you do not have a folder named PROGRAM FILES, but only have the one
named PROGRAM FILES X86, then this would be a 32 bit System.


When installing software, if the software getting installed is a 32 bit
program, it will be installed into the PROGRAM FILES X86 folder. If it
happens to be a 64 bit program, it would be installed into the PROGRAM
FILES folder.


I just thought of another way-


In the Search Field, type, System Info and press the Enter Key.


This should bring up info about your computer, and I think it should
tell you what edition of Windows and whether it is 64 or 32 bit. It
should tell you the Chip speed and the amount of Memory on board too.


Now, I haven't just tried this on my own system, but this info came from
some of the dusty crevices in my Brain.


Grumpy Dave











Damien Garwood <damien@...>
 

Hi Alan,
Actually, the fact that you have one program files folder suggests that you have a 32-bit version of Windows installed. But that can work on either a 32 or 64 bit machine. So it depends whether you want to know if your Windows is 32 or 64-bit (to find out whether you should install 32 or 64-bit software), or whether your machine is 32 or 64 bit (to work out what versions of an operating system you can install if you want to upgrade or whatever).
Cheers,
Damien.

On 13/10/2019 05:56 pm, Alan wrote:
Dear Friends,
The question was,
if I have a 32 Bit or 64 bit Windows 7 machine?
Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data folder, but No Program Files (x86) folder, so from reading the messages of instructions you generously provided  me, I must assume I have a 32 Bit machine!
Thanks for all your help!
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida
----- Original Message ----- From: "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 8:22 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!

1. press window r for run dialogue box
2. type here, msinfo32 and press enter
3. then tab to the reading, use down arrow, yo uwill get the info you requested

note, in point 2, please type msinfo32 with no spaces


----- Original Message ----- From: "Smiling?" <blind7@sbcglobal.net>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 4:41 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!


There's only one thing that I see that is incorrect below, and that is if you are using a 32bit machine, there will be a Program Files (x86) folder which is not true. If you are using a 32bit machine, it will only have a Program Files directory and not the Program Files (x86) directory.

It's when one is using a 64bit machine, it will have both of these above directories.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Dave
Sent: Saturday, October 12, 2019 2:23 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64 bit Windows 7 machine? Thanks!

I am sure there are more than one way to tell if your System is a 64 bit
or 32 bit, but here's how I find out.


I look on the C: Drive, at the folders.  If you have One folder that is
named PROGRAM FILES, and another called, PROGRAM FILES X86, then you
have a 64 bit System.


If you do not have a folder named PROGRAM FILES, but only have the one
named PROGRAM FILES X86, then this would be a 32 bit System.


When installing software, if the software getting installed is a 32 bit
program, it will be installed into the PROGRAM FILES X86 folder.  If it
happens to be a 64 bit program, it would be installed into the PROGRAM
FILES folder.


I just thought of another way-


In the Search Field, type, System Info and press the Enter Key.


This should bring up info about your computer, and I think it should
tell you what edition of Windows and whether it is 64 or 32 bit.    It
should tell you the Chip speed and the amount of Memory on board too.


Now, I haven't just tried this on my own system, but this info came from
some of the dusty crevices in my Brain.


Grumpy Dave












Smiling?
 

Another way of discovering whether or not your machine is 32 or 64bit is by going to the System Properties window (which I believe has already been mentioned earlier),
Windows key+Pause key (the Pause key is generally the key all the way to the right of the 3 pack of keys usually right above the 6 pack of keys on a standard keyboard).

This window will tell you Windows edition, processor, how much memory (RAM) System type (32 or 64bit) machine etc.

The Programs Data folder by the way, is standard. Your machine is as you guessed it, a 32bit machine, but use the above keystroke to make sure if desired.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Alan
Sent: Sunday, October 13, 2019 9:56 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Dear Friends, Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data Folder,

Dear Friends,

The question was,

if I have a 32 Bit or 64 bit Windows 7 machine?

Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data
folder, but No Program Files (x86) folder, so from reading the messages of
instructions you generously provided me, I must assume I have a 32 Bit
machine!

Thanks for all your help!


With best regards.
God Bless.
Alan
Plantation, Sunny South Florida
----- Original Message -----
From: "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 8:22 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64
bit Windows 7 machine? Thanks!


1. press window r for run dialogue box
2. type here, msinfo32 and press enter
3. then tab to the reading, use down arrow, yo uwill get the info you
requested

note, in point 2, please type msinfo32 with no spaces


----- Original Message -----
From: "Smiling?" <blind7@sbcglobal.net>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 4:41 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!


There's only one thing that I see that is incorrect below, and that is if
you are using a 32bit machine, there will be a Program Files (x86) folder
which is not true. If you are using a 32bit machine, it will only have a
Program Files directory and not the Program Files (x86) directory.

It's when one is using a 64bit machine, it will have both of these above
directories.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf
Of Dave
Sent: Saturday, October 12, 2019 2:23 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!

I am sure there are more than one way to tell if your System is a 64 bit
or 32 bit, but here's how I find out.


I look on the C: Drive, at the folders. If you have One folder that is
named PROGRAM FILES, and another called, PROGRAM FILES X86, then you
have a 64 bit System.


If you do not have a folder named PROGRAM FILES, but only have the one
named PROGRAM FILES X86, then this would be a 32 bit System.


When installing software, if the software getting installed is a 32 bit
program, it will be installed into the PROGRAM FILES X86 folder. If it
happens to be a 64 bit program, it would be installed into the PROGRAM
FILES folder.


I just thought of another way-


In the Search Field, type, System Info and press the Enter Key.


This should bring up info about your computer, and I think it should
tell you what edition of Windows and whether it is 64 or 32 bit. It
should tell you the Chip speed and the amount of Memory on board too.


Now, I haven't just tried this on my own system, but this info came from
some of the dusty crevices in my Brain.


Grumpy Dave












Damien Garwood <damien@...>
 

Hi,
I think it is important not to confuse the machine with the operating system. I ran a 32-bit operating system on a 64-bit machine for a while, until I could be certain that all the regular software I ran would work in a 64-bit environment.
What I am unsure of though, is if the operating system is 32-bit, is it capable of recognising that the machine is 64-bit? Because if not, I'm guessing the only real way you could find out the hardware configuration is by some clever electronics engineering or something.
Cheers,
Damien.

On 14/10/2019 11:34 am, Smiling? wrote:
Another way of discovering whether or not your machine is 32 or 64bit is by going to the System Properties window (which I believe has already been mentioned earlier),
Windows key+Pause key (the Pause key is generally the key all the way to the right of the 3 pack of keys usually right above the 6 pack of keys on a standard keyboard).
This window will tell you Windows edition, processor, how much memory (RAM) System type (32 or 64bit) machine etc.
The Programs Data folder by the way, is standard. Your machine is as you guessed it, a 32bit machine, but use the above keystroke to make sure if desired.
-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Alan
Sent: Sunday, October 13, 2019 9:56 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Dear Friends, Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data Folder,
Dear Friends,
The question was,
if I have a 32 Bit or 64 bit Windows 7 machine?
Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data
folder, but No Program Files (x86) folder, so from reading the messages of
instructions you generously provided me, I must assume I have a 32 Bit
machine!
Thanks for all your help!
With best regards.
God Bless.
Alan
Plantation, Sunny South Florida
----- Original Message -----
From: "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 8:22 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64
bit Windows 7 machine? Thanks!

1. press window r for run dialogue box
2. type here, msinfo32 and press enter
3. then tab to the reading, use down arrow, yo uwill get the info you
requested

note, in point 2, please type msinfo32 with no spaces


----- Original Message -----
From: "Smiling?" <blind7@sbcglobal.net>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 4:41 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!


There's only one thing that I see that is incorrect below, and that is if
you are using a 32bit machine, there will be a Program Files (x86) folder
which is not true. If you are using a 32bit machine, it will only have a
Program Files directory and not the Program Files (x86) directory.

It's when one is using a 64bit machine, it will have both of these above
directories.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf
Of Dave
Sent: Saturday, October 12, 2019 2:23 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!

I am sure there are more than one way to tell if your System is a 64 bit
or 32 bit, but here's how I find out.


I look on the C: Drive, at the folders. If you have One folder that is
named PROGRAM FILES, and another called, PROGRAM FILES X86, then you
have a 64 bit System.


If you do not have a folder named PROGRAM FILES, but only have the one
named PROGRAM FILES X86, then this would be a 32 bit System.


When installing software, if the software getting installed is a 32 bit
program, it will be installed into the PROGRAM FILES X86 folder. If it
happens to be a 64 bit program, it would be installed into the PROGRAM
FILES folder.


I just thought of another way-


In the Search Field, type, System Info and press the Enter Key.


This should bring up info about your computer, and I think it should
tell you what edition of Windows and whether it is 64 or 32 bit. It
should tell you the Chip speed and the amount of Memory on board too.


Now, I haven't just tried this on my own system, but this info came from
some of the dusty crevices in my Brain.


Grumpy Dave












Smiling?
 

I would have to strongly say no, that the machine which is running a 32bit OS will not recognize that the hardware itself is 64bit simply due to that the maximum amount of memory that a 32bit OS can run, is 4GB regardless of how much memory one may have installed.

And a 64bit machine can of course run 32bit software's (hence the whole backwards compatible thing).

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Damien Garwood
Sent: Monday, October 14, 2019 3:45 AM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data Folder,

Hi,
I think it is important not to confuse the machine with the operating
system. I ran a 32-bit operating system on a 64-bit machine for a while,
until I could be certain that all the regular software I ran would work
in a 64-bit environment.
What I am unsure of though, is if the operating system is 32-bit, is it
capable of recognising that the machine is 64-bit? Because if not, I'm
guessing the only real way you could find out the hardware configuration
is by some clever electronics engineering or something.
Cheers,
Damien.

On 14/10/2019 11:34 am, Smiling? wrote:
Another way of discovering whether or not your machine is 32 or 64bit is by going to the System Properties window (which I believe has already been mentioned earlier),
Windows key+Pause key (the Pause key is generally the key all the way to the right of the 3 pack of keys usually right above the 6 pack of keys on a standard keyboard).

This window will tell you Windows edition, processor, how much memory (RAM) System type (32 or 64bit) machine etc.

The Programs Data folder by the way, is standard. Your machine is as you guessed it, a 32bit machine, but use the above keystroke to make sure if desired.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf Of Alan
Sent: Sunday, October 13, 2019 9:56 AM
To: main@TechTalk.groups.io
Subject: [TechTalk] Dear Friends, Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data Folder,

Dear Friends,

The question was,

if I have a 32 Bit or 64 bit Windows 7 machine?

Thanks so much,I Only saw 1 Programs Folder, but also a Programs Data
folder, but No Program Files (x86) folder, so from reading the messages of
instructions you generously provided me, I must assume I have a 32 Bit
machine!

Thanks for all your help!


With best regards.
God Bless.
Alan
Plantation, Sunny South Florida
----- Original Message -----
From: "Kerryn Gunness via Groups.Io" <k_gunness=yahoo.ca@groups.io>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 8:22 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or 64
bit Windows 7 machine? Thanks!


1. press window r for run dialogue box
2. type here, msinfo32 and press enter
3. then tab to the reading, use down arrow, yo uwill get the info you
requested

note, in point 2, please type msinfo32 with no spaces


----- Original Message -----
From: "Smiling?" <blind7@sbcglobal.net>
To: <main@TechTalk.groups.io>
Sent: Sunday, October 13, 2019 4:41 AM
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!


There's only one thing that I see that is incorrect below, and that is if
you are using a 32bit machine, there will be a Program Files (x86) folder
which is not true. If you are using a 32bit machine, it will only have a
Program Files directory and not the Program Files (x86) directory.

It's when one is using a 64bit machine, it will have both of these above
directories.

-----Original Message-----
From: main@TechTalk.groups.io [mailto:main@TechTalk.groups.io] On Behalf
Of Dave
Sent: Saturday, October 12, 2019 2:23 PM
To: main@TechTalk.groups.io
Subject: Re: [TechTalk] Dear Friends, How do I tell if I have a 32 Bit or
64 bit Windows 7 machine? Thanks!

I am sure there are more than one way to tell if your System is a 64 bit
or 32 bit, but here's how I find out.


I look on the C: Drive, at the folders. If you have One folder that is
named PROGRAM FILES, and another called, PROGRAM FILES X86, then you
have a 64 bit System.


If you do not have a folder named PROGRAM FILES, but only have the one
named PROGRAM FILES X86, then this would be a 32 bit System.


When installing software, if the software getting installed is a 32 bit
program, it will be installed into the PROGRAM FILES X86 folder. If it
happens to be a 64 bit program, it would be installed into the PROGRAM
FILES folder.


I just thought of another way-


In the Search Field, type, System Info and press the Enter Key.


This should bring up info about your computer, and I think it should
tell you what edition of Windows and whether it is 64 or 32 bit. It
should tell you the Chip speed and the amount of Memory on board too.


Now, I haven't just tried this on my own system, but this info came from
some of the dusty crevices in my Brain.


Grumpy Dave